Failed
gprs:trx-b200.iperf3.py (from gprs_trx-b200)
Stacktrace
osmo-stp_10.42.42.5(pid=27508): Process ended prematurely: osmo-stp_10.42.42.5(pid=27508) [trial-2373↪gprs:trx-b200↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27508)]
Standard Output
---------------------------------------------- trial-2373 gprs:trx-b200 iperf3.py ---------------------------------------------- 10:10:41.660614 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 10:10:41.672039 tst gprs:trx-b200: Using 1 x bts (candidates: 1) 10:10:41.811945 tst iperf3.py: using LAC 27666 10:10:41.933697 tst iperf3.py: using RAC 126 10:10:42.052876 tst iperf3.py: using CellId 27666 10:10:42.173885 tst iperf3.py: using BVCI 27667 10:10:42.197048 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 10:10:42.207852 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 10:10:42.218421 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 10:10:42.228848 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 10:10:42.239236 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 10:10:42.249524 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 10:10:42.260027 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 10:10:42.270398 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 10:10:42.280809 tst gprs:trx-b200: Using 1 x modem (candidates: 4) 10:10:42.574387 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 10:10:42.711166 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:10:43.047116 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27500): Launched 10:10:43.325441 run iperf3-srv_10.42.42.10(pid=27501): Launched 10:10:43.524512 tst iperf3.py:8: start network... 10:10:43.660505 run osmo-hlr_10.42.42.2: Starting osmo-hlr 10:10:44.169093 run create_hlr_db(pid=27502): Launched 10:10:44.357535 bus /gobi_6: Setting Powered False 10:10:45.377882 run create_hlr_db(pid=27502): Terminated: ok {rc=0} 10:10:45.786627 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27504): Launched 10:10:46.262046 run osmo-hlr_10.42.42.2(pid=27505): Launched 10:10:46.424149 run osmo-stp_10.42.42.5: Starting osmo-stp 10:10:47.034483 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27507): Launched 10:10:47.356871 run osmo-stp_10.42.42.5(pid=27508): Launched 10:10:47.520003 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 10:10:48.072871 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27510): Launched 10:10:48.189494 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 10:10:48.471666 run patchelf(pid=27511): Launched 10:10:48.662275 run osmo-stp_10.42.42.5(pid=27508): ERR: Terminated: ERROR {rc=1} [trial-2373↪gprs:trx-b200↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27508)] 10:10:48.802092 run osmo-stp_10.42.42.5(pid=27508): stdout: | (launched: 2022-12-10_10:10:47.191969) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:10:48.941706 run osmo-stp_10.42.42.5(pid=27508): stderr: | �[0;m�[38;5;43m20221210101047518 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210101047518 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210101047519 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210101047519 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210101047520 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210101047520 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210101047520 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:10:49.076268 run osmo-stp_10.42.42.5(pid=27508): stdout: | (launched: 2022-12-10_10:10:47.191969) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:10:49.209412 run osmo-stp_10.42.42.5(pid=27508): stderr: | �[0;m�[38;5;43m20221210101047518 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210101047518 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210101047519 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210101047519 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210101047520 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210101047520 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210101047520 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:10:49.365089 run patchelf(pid=27511): Terminating (SIGINT) 10:10:49.547659 run patchelf(pid=27511): Terminated: ok {rc=0} 10:10:49.581081 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=27508): Process ended prematurely: osmo-stp_10.42.42.5(pid=27508) [trial-2373↪gprs:trx-b200↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27508)] [trial-2373↪gprs:trx-b200↪iperf3.py:8] 10:10:49.591116 tst iperf3.py:8: Test FAILED (8.0 sec) 10:10:49.655316 run osmo-hlr_10.42.42.2(pid=27505): ERR: Terminated: ERROR {rc=237} [trial-2373↪gprs:trx-b200↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=27505)] 10:10:49.707082 run osmo-hlr_10.42.42.2(pid=27505): stdout: | (launched: 2022-12-10_10:10:45.965487) 10:10:49.759697 run osmo-hlr_10.42.42.2(pid=27505): stderr: | �[0;m�[1;31m20221210101046328 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210101046328 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210101046328 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210101046328 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210101046328 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210101046328 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210101046346 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2373/run.2022-12-10_09-48-07/gprs:trx-b200/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210101046354 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210101046355 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210101046355 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 10:10:49.804257 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27500): Terminating (SIGTERM) 10:10:49.847003 run iperf3-srv_10.42.42.10(pid=27501): Terminating (SIGTERM) 10:10:49.889408 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27504): Terminating (SIGTERM) 10:10:49.931393 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27507): Terminating (SIGTERM) 10:10:49.974008 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27510): Terminating (SIGTERM) 10:10:49.983898 --- ParallelTerminationStrategy: PID 27500 died... 10:10:50.040143 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27500): Terminated: ok {rc=0} 10:10:50.050527 --- ParallelTerminationStrategy: PID 27501 died... 10:10:50.107188 run iperf3-srv_10.42.42.10(pid=27501): Terminated {rc=256} 10:10:50.117241 --- ParallelTerminationStrategy: PID 27504 died... 10:10:50.173139 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27504): Terminated: ok {rc=0} 10:10:50.183103 --- ParallelTerminationStrategy: PID 27507 died... 10:10:50.239031 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27507): Terminated: ok {rc=0} 10:10:50.249065 --- ParallelTerminationStrategy: PID 27510 died... 10:10:50.304684 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27510): Terminated: ok {rc=0} 10:10:50.392937 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=27508): Process ended prematurely: osmo-stp_10.42.42.5(pid=27508) [trial-2373↪gprs:trx-b200↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27508)]