Failed
dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo.switch_tch_pdch.py (from dynts_trx-lms-limenet-micro+mod-bts0-dynts67-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=25081): Process ended prematurely: osmo-stp_10.42.42.5(pid=25081) [trial-2376↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25081)]
Standard Output
---------------------------------------------- trial-2376 dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo switch_tch_pdch.py ---------------------------------------------- 16:37:03.103119 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 16:37:03.114408 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x bts (candidates: 1) 16:37:03.262260 tst switch_tch_pdch.py: using LAC 29249 16:37:03.374201 tst switch_tch_pdch.py: using RAC 179 16:37:03.492213 tst switch_tch_pdch.py: using CellId 29249 16:37:03.605184 tst switch_tch_pdch.py: using BVCI 29250 16:37:03.627388 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 16:37:03.638520 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 16:37:03.649395 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 16:37:03.660488 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 16:37:03.671576 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 16:37:03.682789 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 16:37:03.694022 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 16:37:03.705112 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x modem (candidates: 2) 16:37:03.822438 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x modem (candidates: 2) 16:37:04.092378 tst switch_tch_pdch.py:51: start network... 16:37:04.213389 run osmo-hlr_10.42.42.2: Starting osmo-hlr 16:37:04.645532 run create_hlr_db(pid=25075): Launched 16:37:04.764291 bus /gobi_6: Setting Powered False 16:37:05.834583 run create_hlr_db(pid=25075): Terminated: ok {rc=0} 16:37:06.221301 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25077): Launched 16:37:06.532697 run osmo-hlr_10.42.42.2(pid=25078): Launched 16:37:06.647443 run osmo-stp_10.42.42.5: Starting osmo-stp 16:37:07.159016 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25080): Launched 16:37:07.469276 run osmo-stp_10.42.42.5(pid=25081): Launched 16:37:07.583323 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 16:37:08.099753 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25083): Launched 16:37:08.210189 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 16:37:08.480449 run patchelf(pid=25084): Launched 16:37:08.662364 run osmo-stp_10.42.42.5(pid=25081): ERR: Terminated: ERROR {rc=1} [trial-2376↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25081)] 16:37:08.794914 run osmo-stp_10.42.42.5(pid=25081): stdout: | (launched: 2022-12-10_16:37:07.316549) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:37:08.927889 run osmo-stp_10.42.42.5(pid=25081): stderr: | �[0;m�[38;5;43m20221210163707505 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210163707505 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210163707506 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210163707506 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210163707508 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210163707508 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210163707508 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:37:09.056138 run osmo-stp_10.42.42.5(pid=25081): stdout: | (launched: 2022-12-10_16:37:07.316549) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:37:09.183535 run osmo-stp_10.42.42.5(pid=25081): stderr: | �[0;m�[38;5;43m20221210163707505 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210163707505 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210163707506 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210163707506 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210163707508 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210163707508 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210163707508 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:37:09.331723 run patchelf(pid=25084): Terminating (SIGINT) 16:37:09.506653 run patchelf(pid=25084): Terminated: ok {rc=0} 16:37:09.538410 tst switch_tch_pdch.py:54: ERR: Error: osmo-stp_10.42.42.5(pid=25081): Process ended prematurely: osmo-stp_10.42.42.5(pid=25081) [trial-2376↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25081)] [trial-2376↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54] 16:37:09.547447 tst switch_tch_pdch.py:54: Test FAILED (6.4 sec) 16:37:09.609939 run osmo-hlr_10.42.42.2(pid=25078): ERR: Terminated: ERROR {rc=237} [trial-2376↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo↪switch_tch_pdch.py↪switch_tch_pdch.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=25078)] 16:37:09.661576 run osmo-hlr_10.42.42.2(pid=25078): stdout: | (launched: 2022-12-10_16:37:06.379805) 16:37:09.713078 run osmo-hlr_10.42.42.2(pid=25078): stderr: | �[0;m�[1;31m20221210163706579 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210163706579 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210163706579 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210163706579 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210163706579 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210163706579 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210163706592 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2376/run.2022-12-10_15-37-08/dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo/switch_tch_pdch.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210163706600 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210163706601 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210163706601 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 16:37:09.756905 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25077): Terminating (SIGTERM) 16:37:09.798337 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25080): Terminating (SIGTERM) 16:37:09.840172 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25083): Terminating (SIGTERM) 16:37:09.849831 --- ParallelTerminationStrategy: PID 25077 died... 16:37:09.905485 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25077): Terminated: ok {rc=0} 16:37:09.915448 --- ParallelTerminationStrategy: PID 25080 died... 16:37:09.970663 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25080): Terminated: ok {rc=0} 16:37:09.980567 --- ParallelTerminationStrategy: PID 25083 died... 16:37:10.035755 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25083): Terminated: ok {rc=0} 16:37:10.122571 bus /gobi_0: Setting Powered False 16:37:11.225224 bus /gobi_0: Setting Powered False 16:37:12.335712 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/dynts/switch_tch_pdch.py", line 54, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=25081): Process ended prematurely: osmo-stp_10.42.42.5(pid=25081) [trial-2376↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25081)]