Failed
gprs:oc2g+mod-bts0-dynts-ipa.ping_idle_ping.py (from gprs_oc2g+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=20939): Process ended prematurely: osmo-stp_10.42.42.5(pid=20939) [trial-2376↪gprs:oc2g+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20939)]
Standard Output
---------------------------------------------- trial-2376 gprs:oc2g+mod-bts0-dynts-ipa ping_idle_ping.py ---------------------------------------------- 15:53:34.803422 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 15:53:34.816431 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 15:53:34.970360 tst ping_idle_ping.py: using LAC 29016 15:53:35.100124 tst ping_idle_ping.py: using RAC 201 15:53:35.231155 tst ping_idle_ping.py: using CellId 29016 15:53:35.356300 tst ping_idle_ping.py: using BVCI 29017 15:53:35.381806 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 15:53:35.394220 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 15:53:35.406021 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 15:53:35.418177 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 15:53:35.430245 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 15:53:35.442118 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 15:53:35.454458 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 15:53:35.466795 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 15:53:35.762730 tst ping_idle_ping.py:24: start network... 15:53:35.898034 run osmo-hlr_10.42.42.2: Starting osmo-hlr 15:53:36.453670 run create_hlr_db(pid=20933): Launched 15:53:36.642366 bus /gobi_6: Setting Powered False 15:53:37.664330 run create_hlr_db(pid=20933): Terminated: ok {rc=0} 15:53:38.108387 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20935): Launched 15:53:38.527854 run osmo-hlr_10.42.42.2(pid=20936): Launched 15:53:38.776922 run osmo-stp_10.42.42.5: Starting osmo-stp 15:53:39.351133 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20938): Launched 15:53:39.767359 run osmo-stp_10.42.42.5(pid=20939): Launched 15:53:39.985707 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 15:53:40.532600 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20942): Launched 15:53:40.644538 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 15:53:40.917149 run patchelf(pid=20943): Launched 15:53:41.101429 run osmo-stp_10.42.42.5(pid=20939): ERR: Terminated: ERROR {rc=1} [trial-2376↪gprs:oc2g+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20939)] 15:53:41.235314 run osmo-stp_10.42.42.5(pid=20939): stdout: | (launched: 2022-12-10_15:53:39.513872) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 15:53:41.369736 run osmo-stp_10.42.42.5(pid=20939): stderr: | �[0;m�[38;5;43m20221210155339812 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210155339812 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210155339813 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210155339813 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210155339814 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210155339814 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210155339814 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 15:53:41.498881 run osmo-stp_10.42.42.5(pid=20939): stdout: | (launched: 2022-12-10_15:53:39.513872) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 15:53:41.627179 run osmo-stp_10.42.42.5(pid=20939): stderr: | �[0;m�[38;5;43m20221210155339812 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210155339812 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210155339813 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210155339813 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210155339814 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210155339814 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210155339814 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 15:53:41.776410 run patchelf(pid=20943): Terminating (SIGINT) 15:53:41.952708 run patchelf(pid=20943): Terminated: ok {rc=0} 15:53:41.984713 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=20939): Process ended prematurely: osmo-stp_10.42.42.5(pid=20939) [trial-2376↪gprs:oc2g+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20939)] [trial-2376↪gprs:oc2g+mod-bts0-dynts-ipa↪ping_idle_ping.py:27] 15:53:41.993851 tst ping_idle_ping.py:27: Test FAILED (7.2 sec) 15:53:42.056300 run osmo-hlr_10.42.42.2(pid=20936): ERR: Terminated: ERROR {rc=237} [trial-2376↪gprs:oc2g+mod-bts0-dynts-ipa↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=20936)] 15:53:42.107795 run osmo-hlr_10.42.42.2(pid=20936): stdout: | (launched: 2022-12-10_15:53:38.272228) 15:53:42.159933 run osmo-hlr_10.42.42.2(pid=20936): stderr: | �[0;m�[1;31m20221210155338583 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210155338583 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210155338583 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210155338583 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210155338583 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210155338583 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210155338602 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2376/run.2022-12-10_15-37-08/gprs:oc2g+mod-bts0-dynts-ipa/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210155338610 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210155338611 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210155338611 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 15:53:42.203994 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20935): Terminating (SIGTERM) 15:53:42.245804 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20938): Terminating (SIGTERM) 15:53:42.287783 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20942): Terminating (SIGTERM) 15:53:42.297494 --- ParallelTerminationStrategy: PID 20935 died... 15:53:42.354075 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20935): Terminated: ok {rc=0} 15:53:42.364138 --- ParallelTerminationStrategy: PID 20938 died... 15:53:42.420796 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20938): Terminated: ok {rc=0} 15:53:42.430823 --- ParallelTerminationStrategy: PID 20942 died... 15:53:42.486598 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20942): Terminated: ok {rc=0} 15:53:42.573517 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=20939): Process ended prematurely: osmo-stp_10.42.42.5(pid=20939) [trial-2376↪gprs:oc2g+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20939)]