Failed
gprs:oc2g.cs_paging_gprs_active.py (from gprs_oc2g)
Stacktrace
osmo-stp_10.42.42.5(pid=20481): Process ended prematurely: osmo-stp_10.42.42.5(pid=20481) [trial-2376↪gprs:oc2g↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20481)]
Standard Output
---------------------------------------------- trial-2376 gprs:oc2g cs_paging_gprs_active.py ---------------------------------------------- 15:50:43.847082 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 15:50:43.857992 tst gprs:oc2g: Using 1 x bts (candidates: 1) 15:50:43.981677 tst cs_paging_gprs_active.py: using LAC 29002 15:50:44.101458 tst cs_paging_gprs_active.py: using RAC 187 15:50:44.220362 tst cs_paging_gprs_active.py: using CellId 29002 15:50:44.339539 tst cs_paging_gprs_active.py: using BVCI 29003 15:50:44.362523 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 15:50:44.372919 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 15:50:44.383399 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 15:50:44.394478 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 15:50:44.404814 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 15:50:44.415271 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 15:50:44.425813 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 15:50:44.436195 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 15:50:44.446762 tst gprs:oc2g: Using 1 x modem (candidates: 4) 15:50:44.561515 tst gprs:oc2g: Using 1 x modem (candidates: 4) 15:50:44.834755 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 15:50:44.959041 run iperf3-srv_10.42.42.10: Starting iperf3-srv 15:50:45.267332 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20471): Launched 15:50:45.522950 run iperf3-srv_10.42.42.10(pid=20472): Launched 15:50:45.704636 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 15:50:45.828847 run iperf3-srv_10.42.42.10: Starting iperf3-srv 15:50:46.165601 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20473): Launched 15:50:46.455437 run iperf3-srv_10.42.42.10(pid=20474): Launched 15:50:46.640695 tst cs_paging_gprs_active.py:38: start network... 15:50:46.767847 run osmo-hlr_10.42.42.2: Starting osmo-hlr 15:50:47.280185 run create_hlr_db(pid=20475): Launched 15:50:47.451233 bus /sierra_2: Setting Powered False 15:50:48.474084 run create_hlr_db(pid=20475): Terminated: ok {rc=0} 15:50:48.896255 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20477): Launched 15:50:49.214427 run osmo-hlr_10.42.42.2(pid=20478): Launched 15:50:49.330885 run osmo-stp_10.42.42.5: Starting osmo-stp 15:50:49.885621 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20480): Launched 15:50:50.203250 run osmo-stp_10.42.42.5(pid=20481): Launched 15:50:50.318748 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 15:50:50.871738 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20483): Launched 15:50:50.985488 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 15:50:51.263064 run patchelf(pid=20484): Launched 15:50:51.449908 run osmo-stp_10.42.42.5(pid=20481): ERR: Terminated: ERROR {rc=1} [trial-2376↪gprs:oc2g↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20481)] 15:50:51.587649 run osmo-stp_10.42.42.5(pid=20481): stdout: | (launched: 2022-12-10_15:50:50.048097) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 15:50:51.725210 run osmo-stp_10.42.42.5(pid=20481): stderr: | �[0;m�[38;5;43m20221210155050238 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210155050238 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210155050238 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210155050239 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210155050239 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210155050239 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210155050239 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 15:50:51.857804 run osmo-stp_10.42.42.5(pid=20481): stdout: | (launched: 2022-12-10_15:50:50.048097) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 15:50:51.989070 run osmo-stp_10.42.42.5(pid=20481): stderr: | �[0;m�[38;5;43m20221210155050238 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210155050238 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210155050238 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210155050239 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210155050239 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210155050239 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210155050239 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 15:50:52.142140 run patchelf(pid=20484): Terminating (SIGINT) 15:50:52.321647 run patchelf(pid=20484): Terminated: ok {rc=0} 15:50:52.354568 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=20481): Process ended prematurely: osmo-stp_10.42.42.5(pid=20481) [trial-2376↪gprs:oc2g↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20481)] [trial-2376↪gprs:oc2g↪cs_paging_gprs_active.py:38] 15:50:52.364211 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 15:50:52.427182 run osmo-hlr_10.42.42.2(pid=20478): ERR: Terminated: ERROR {rc=237} [trial-2376↪gprs:oc2g↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=20478)] 15:50:52.478631 run osmo-hlr_10.42.42.2(pid=20478): stdout: | (launched: 2022-12-10_15:50:49.058988) 15:50:52.530505 run osmo-hlr_10.42.42.2(pid=20478): stderr: | �[0;m�[1;31m20221210155049256 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210155049256 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210155049256 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210155049256 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210155049256 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210155049256 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210155049268 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2376/run.2022-12-10_15-37-08/gprs:oc2g/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210155049276 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210155049277 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210155049277 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 15:50:52.574668 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20471): Terminating (SIGTERM) 15:50:52.616277 run iperf3-srv_10.42.42.10(pid=20472): Terminating (SIGTERM) 15:50:52.658007 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20473): Terminating (SIGTERM) 15:50:52.699733 run iperf3-srv_10.42.42.10(pid=20474): Terminating (SIGTERM) 15:50:52.741586 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20477): Terminating (SIGTERM) 15:50:52.783234 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20480): Terminating (SIGTERM) 15:50:52.825021 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20483): Terminating (SIGTERM) 15:50:52.834728 --- ParallelTerminationStrategy: PID 20471 died... 15:50:52.890598 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20471): Terminated: ok {rc=0} 15:50:52.900571 --- ParallelTerminationStrategy: PID 20472 died... 15:50:52.955749 run iperf3-srv_10.42.42.10(pid=20472): Terminated {rc=256} 15:50:52.965821 --- ParallelTerminationStrategy: PID 20473 died... 15:50:53.021884 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20473): Terminated: ok {rc=0} 15:50:53.031864 --- ParallelTerminationStrategy: PID 20474 died... 15:50:53.087075 run iperf3-srv_10.42.42.10(pid=20474): Terminated {rc=256} 15:50:53.097221 --- ParallelTerminationStrategy: PID 20477 died... 15:50:53.152510 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20477): Terminated: ok {rc=0} 15:50:53.162604 --- ParallelTerminationStrategy: PID 20480 died... 15:50:53.217816 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20480): Terminated: ok {rc=0} 15:50:53.227834 --- ParallelTerminationStrategy: PID 20483 died... 15:50:53.283585 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20483): Terminated: ok {rc=0} 15:50:53.369165 bus /gobi_0: Setting Powered False 15:50:54.476354 bus /gobi_0: Setting Powered False 15:50:55.584663 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=20481): Process ended prematurely: osmo-stp_10.42.42.5(pid=20481) [trial-2376↪gprs:oc2g↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20481)]