Failed
gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=23630): Process ended prematurely: osmo-stp_10.42.42.5(pid=23630) [trial-2376↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23630)]
Standard Output
---------------------------------------------- trial-2376 gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py ---------------------------------------------- 16:20:14.631085 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 16:20:14.642965 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 16:20:14.784754 tst cs_paging_gprs_active.py: using LAC 29159 16:20:14.904258 tst cs_paging_gprs_active.py: using RAC 89 16:20:15.030037 tst cs_paging_gprs_active.py: using CellId 29159 16:20:15.159388 tst cs_paging_gprs_active.py: using BVCI 29160 16:20:15.183988 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 16:20:15.195889 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 16:20:15.207622 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 16:20:15.219330 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 16:20:15.230984 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 16:20:15.242604 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 16:20:15.254416 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 16:20:15.266038 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 16:20:15.277927 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 16:20:15.401630 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 16:20:15.677493 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 16:20:15.801854 run iperf3-srv_10.42.42.10: Starting iperf3-srv 16:20:16.174099 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23620): Launched 16:20:16.481919 run iperf3-srv_10.42.42.10(pid=23621): Launched 16:20:16.674149 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 16:20:16.829720 run iperf3-srv_10.42.42.10: Starting iperf3-srv 16:20:17.162049 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23622): Launched 16:20:17.420422 run iperf3-srv_10.42.42.10(pid=23623): Launched 16:20:17.602164 tst cs_paging_gprs_active.py:38: start network... 16:20:17.726063 run osmo-hlr_10.42.42.2: Starting osmo-hlr 16:20:18.193709 run create_hlr_db(pid=23624): Launched 16:20:18.364622 bus /gobi_6: Setting Powered False 16:20:19.387390 run create_hlr_db(pid=23624): Terminated: ok {rc=0} 16:20:19.811200 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23626): Launched 16:20:20.129777 run osmo-hlr_10.42.42.2(pid=23627): Launched 16:20:20.250632 run osmo-stp_10.42.42.5: Starting osmo-stp 16:20:20.800624 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23629): Launched 16:20:21.117150 run osmo-stp_10.42.42.5(pid=23630): Launched 16:20:21.233133 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 16:20:21.785682 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23632): Launched 16:20:21.899299 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 16:20:22.175930 run patchelf(pid=23633): Launched 16:20:22.361724 run osmo-stp_10.42.42.5(pid=23630): ERR: Terminated: ERROR {rc=1} [trial-2376↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23630)] 16:20:22.498189 run osmo-stp_10.42.42.5(pid=23630): stdout: | (launched: 2022-12-10_16:20:20.962465) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:20:22.634933 run osmo-stp_10.42.42.5(pid=23630): stderr: | �[0;m�[38;5;43m20221210162021154 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210162021154 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210162021154 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210162021155 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210162021155 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210162021155 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210162021155 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:20:22.766660 run osmo-stp_10.42.42.5(pid=23630): stdout: | (launched: 2022-12-10_16:20:20.962465) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:20:22.897074 run osmo-stp_10.42.42.5(pid=23630): stderr: | �[0;m�[38;5;43m20221210162021154 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210162021154 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210162021154 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210162021155 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210162021155 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210162021155 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210162021155 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:20:23.048940 run patchelf(pid=23633): Terminating (SIGINT) 16:20:23.227329 run patchelf(pid=23633): Terminated: ok {rc=0} 16:20:23.260289 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=23630): Process ended prematurely: osmo-stp_10.42.42.5(pid=23630) [trial-2376↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23630)] [trial-2376↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38] 16:20:23.270373 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 16:20:23.334129 run osmo-hlr_10.42.42.2(pid=23627): ERR: Terminated: ERROR {rc=237} [trial-2376↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=23627)] 16:20:23.385545 run osmo-hlr_10.42.42.2(pid=23627): stdout: | (launched: 2022-12-10_16:20:19.974192) 16:20:23.437854 run osmo-hlr_10.42.42.2(pid=23627): stderr: | �[0;m�[1;31m20221210162020170 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210162020170 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210162020170 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210162020170 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210162020171 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210162020171 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210162020183 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2376/run.2022-12-10_15-37-08/gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210162020194 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210162020194 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210162020194 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 16:20:23.482355 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23620): Terminating (SIGTERM) 16:20:23.524325 run iperf3-srv_10.42.42.10(pid=23621): Terminating (SIGTERM) 16:20:23.566535 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23622): Terminating (SIGTERM) 16:20:23.608236 run iperf3-srv_10.42.42.10(pid=23623): Terminating (SIGTERM) 16:20:23.650939 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23626): Terminating (SIGTERM) 16:20:23.693051 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23629): Terminating (SIGTERM) 16:20:23.735029 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23632): Terminating (SIGTERM) 16:20:23.744827 --- ParallelTerminationStrategy: PID 23620 died... 16:20:23.801208 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23620): Terminated: ok {rc=0} 16:20:23.811396 --- ParallelTerminationStrategy: PID 23621 died... 16:20:23.866918 run iperf3-srv_10.42.42.10(pid=23621): Terminated {rc=256} 16:20:23.877222 --- ParallelTerminationStrategy: PID 23622 died... 16:20:23.933146 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23622): Terminated: ok {rc=0} 16:20:23.943241 --- ParallelTerminationStrategy: PID 23623 died... 16:20:23.998896 run iperf3-srv_10.42.42.10(pid=23623): Terminated {rc=256} 16:20:24.009016 --- ParallelTerminationStrategy: PID 23626 died... 16:20:24.064439 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23626): Terminated: ok {rc=0} 16:20:24.074789 --- ParallelTerminationStrategy: PID 23629 died... 16:20:24.130606 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23629): Terminated: ok {rc=0} 16:20:24.140729 --- ParallelTerminationStrategy: PID 23632 died... 16:20:24.196940 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23632): Terminated: ok {rc=0} 16:20:24.285199 bus /gobi_0: Setting Powered False 16:20:25.389973 bus /gobi_0: Setting Powered False 16:20:26.498955 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=23630): Process ended prematurely: osmo-stp_10.42.42.5(pid=23630) [trial-2376↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23630)]