Failed
gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend.iperf3.py (from gprs_trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=23642): Process ended prematurely: osmo-stp_10.42.42.5(pid=23642) [trial-2376↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23642)]
Standard Output
---------------------------------------------- trial-2376 gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend iperf3.py ---------------------------------------------- 16:20:27.609998 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 16:20:27.621852 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 16:20:27.762567 tst iperf3.py: using LAC 29160 16:20:27.879921 tst iperf3.py: using RAC 90 16:20:27.997661 tst iperf3.py: using CellId 29160 16:20:28.114149 tst iperf3.py: using BVCI 29161 16:20:28.136753 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 16:20:28.147940 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 16:20:28.158937 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 16:20:28.170323 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 16:20:28.181637 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 16:20:28.192668 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 16:20:28.204123 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 16:20:28.215557 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 16:20:28.227233 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 16:20:28.501740 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 16:20:28.625509 run iperf3-srv_10.42.42.10: Starting iperf3-srv 16:20:28.934024 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23634): Launched 16:20:29.189552 run iperf3-srv_10.42.42.10(pid=23635): Launched 16:20:29.370387 tst iperf3.py:8: start network... 16:20:29.494090 run osmo-hlr_10.42.42.2: Starting osmo-hlr 16:20:29.960044 run create_hlr_db(pid=23636): Launched 16:20:30.130549 bus /gobi_6: Setting Powered False 16:20:31.153966 run create_hlr_db(pid=23636): Terminated: ok {rc=0} 16:20:31.572071 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23638): Launched 16:20:31.962501 run osmo-hlr_10.42.42.2(pid=23639): Launched 16:20:32.222319 run osmo-stp_10.42.42.5: Starting osmo-stp 16:20:32.794889 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23641): Launched 16:20:33.111702 run osmo-stp_10.42.42.5(pid=23642): Launched 16:20:33.225762 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 16:20:33.779012 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23644): Launched 16:20:33.892822 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 16:20:34.169368 run patchelf(pid=23645): Launched 16:20:34.355512 run osmo-stp_10.42.42.5(pid=23642): ERR: Terminated: ERROR {rc=1} [trial-2376↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23642)] 16:20:34.492060 run osmo-stp_10.42.42.5(pid=23642): stdout: | (launched: 2022-12-10_16:20:32.956775) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:20:34.628903 run osmo-stp_10.42.42.5(pid=23642): stderr: | �[0;m�[38;5;43m20221210162033148 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210162033148 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210162033148 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210162033148 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210162033149 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210162033149 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210162033149 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:20:34.760223 run osmo-stp_10.42.42.5(pid=23642): stdout: | (launched: 2022-12-10_16:20:32.956775) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:20:34.890793 run osmo-stp_10.42.42.5(pid=23642): stderr: | �[0;m�[38;5;43m20221210162033148 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210162033148 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210162033148 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210162033148 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210162033149 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210162033149 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210162033149 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:20:35.043083 run patchelf(pid=23645): Terminating (SIGINT) 16:20:35.221428 run patchelf(pid=23645): Terminated: ok {rc=0} 16:20:35.254044 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=23642): Process ended prematurely: osmo-stp_10.42.42.5(pid=23642) [trial-2376↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23642)] [trial-2376↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8] 16:20:35.263862 tst iperf3.py:8: Test FAILED (7.7 sec) 16:20:35.326530 run osmo-hlr_10.42.42.2(pid=23639): ERR: Terminated: ERROR {rc=237} [trial-2376↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=23639)] 16:20:35.377472 run osmo-hlr_10.42.42.2(pid=23639): stdout: | (launched: 2022-12-10_16:20:31.726397) 16:20:35.429335 run osmo-hlr_10.42.42.2(pid=23639): stderr: | �[0;m�[1;31m20221210162032090 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210162032090 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210162032090 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210162032090 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210162032090 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210162032091 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210162032105 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2376/run.2022-12-10_15-37-08/gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210162032130 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210162032130 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210162032130 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 16:20:35.473412 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23634): Terminating (SIGTERM) 16:20:35.515160 run iperf3-srv_10.42.42.10(pid=23635): Terminating (SIGTERM) 16:20:35.557187 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23638): Terminating (SIGTERM) 16:20:35.599285 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23641): Terminating (SIGTERM) 16:20:35.641163 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23644): Terminating (SIGTERM) 16:20:35.650992 --- ParallelTerminationStrategy: PID 23634 died... 16:20:35.707133 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23634): Terminated: ok {rc=0} 16:20:35.717271 --- ParallelTerminationStrategy: PID 23635 died... 16:20:35.773096 run iperf3-srv_10.42.42.10(pid=23635): Terminated {rc=256} 16:20:35.783299 --- ParallelTerminationStrategy: PID 23638 died... 16:20:35.838924 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23638): Terminated: ok {rc=0} 16:20:35.849108 --- ParallelTerminationStrategy: PID 23641 died... 16:20:35.904838 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23641): Terminated: ok {rc=0} 16:20:35.915137 --- ParallelTerminationStrategy: PID 23644 died... 16:20:35.971003 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23644): Terminated: ok {rc=0} 16:20:36.057704 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=23642): Process ended prematurely: osmo-stp_10.42.42.5(pid=23642) [trial-2376↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23642)]