Failed
gprs:trx-b200+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=28454): Process ended prematurely: osmo-stp_10.42.42.5(pid=28454) [trial-2379↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28454)]
Standard Output
---------------------------------------------- trial-2379 gprs:trx-b200+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 16:30:47.702469 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:30:47.713347 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 16:30:47.879609 tst cs_paging_gprs_active.py: using LAC 30094 16:30:48.014295 tst cs_paging_gprs_active.py: using RAC 4 16:30:48.143398 tst cs_paging_gprs_active.py: using CellId 30094 16:30:48.271343 tst cs_paging_gprs_active.py: using BVCI 30095 16:30:48.296874 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:30:48.308258 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:30:48.319405 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:30:48.330977 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:30:48.342525 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:30:48.354088 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:30:48.365619 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:30:48.377055 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 16:30:48.388502 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 16:30:48.507623 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 16:30:48.809500 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 16:30:48.948725 run iperf3-srv_10.42.42.10: Starting iperf3-srv 16:30:49.296026 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28444): Launched 16:30:49.583729 run iperf3-srv_10.42.42.10(pid=28445): Launched 16:30:49.787726 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 16:30:49.926780 run iperf3-srv_10.42.42.10: Starting iperf3-srv 16:30:50.274021 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28446): Launched 16:30:50.562926 run iperf3-srv_10.42.42.10(pid=28447): Launched 16:30:50.766952 tst cs_paging_gprs_active.py:38: start network... 16:30:50.906179 run osmo-hlr_10.42.42.2: Starting osmo-hlr 16:30:51.431291 run create_hlr_db(pid=28448): Launched 16:30:51.623603 bus /gobi_6: Setting Powered False 16:30:52.642737 run create_hlr_db(pid=28448): Terminated: ok {rc=0} 16:30:53.086122 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28450): Launched 16:30:53.421646 run osmo-hlr_10.42.42.2(pid=28451): Launched 16:30:53.545259 run osmo-stp_10.42.42.5: Starting osmo-stp 16:30:54.126533 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28453): Launched 16:30:54.461633 run osmo-stp_10.42.42.5(pid=28454): Launched 16:30:54.582554 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 16:30:55.162719 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28456): Launched 16:30:55.281455 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 16:30:55.574300 run patchelf(pid=28457): Launched 16:30:55.767790 run osmo-stp_10.42.42.5(pid=28454): ERR: Terminated: ERROR {rc=1} [trial-2379↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28454)] 16:30:55.909203 run osmo-stp_10.42.42.5(pid=28454): stdout: | (launched: 2022-12-12_16:30:54.295673) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:30:56.050945 run osmo-stp_10.42.42.5(pid=28454): stderr: | �[0;m�[38;5;43m20221212163054485 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212163054485 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212163054485 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212163054486 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212163054486 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212163054486 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212163054487 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:30:56.188647 run osmo-stp_10.42.42.5(pid=28454): stdout: | (launched: 2022-12-12_16:30:54.295673) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:30:56.325044 run osmo-stp_10.42.42.5(pid=28454): stderr: | �[0;m�[38;5;43m20221212163054485 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212163054485 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212163054485 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212163054486 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212163054486 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212163054486 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212163054487 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:30:56.483638 run patchelf(pid=28457): Terminating (SIGINT) 16:30:56.669134 run patchelf(pid=28457): Terminated: ok {rc=0} 16:30:56.703051 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=28454): Process ended prematurely: osmo-stp_10.42.42.5(pid=28454) [trial-2379↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28454)] [trial-2379↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 16:30:56.713080 tst cs_paging_gprs_active.py:38: Test FAILED (9.0 sec) 16:30:56.776689 run osmo-hlr_10.42.42.2(pid=28451): ERR: Terminated: ERROR {rc=237} [trial-2379↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=28451)] 16:30:56.828371 run osmo-hlr_10.42.42.2(pid=28451): stdout: | (launched: 2022-12-12_16:30:53.255360) 16:30:56.880768 run osmo-hlr_10.42.42.2(pid=28451): stderr: | �[0;m�[1;31m20221212163053451 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212163053451 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212163053451 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212163053451 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212163053451 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212163053451 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212163053464 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2379/run.2022-12-12_16-06-15/gprs:trx-b200+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212163053473 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212163053473 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212163053473 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 16:30:56.925732 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28444): Terminating (SIGTERM) 16:30:56.967497 run iperf3-srv_10.42.42.10(pid=28445): Terminating (SIGTERM) 16:30:57.009849 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28446): Terminating (SIGTERM) 16:30:57.051915 run iperf3-srv_10.42.42.10(pid=28447): Terminating (SIGTERM) 16:30:57.094078 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28450): Terminating (SIGTERM) 16:30:57.136311 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28453): Terminating (SIGTERM) 16:30:57.178610 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28456): Terminating (SIGTERM) 16:30:57.188670 --- ParallelTerminationStrategy: PID 28444 died... 16:30:57.245298 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28444): Terminated: ok {rc=0} 16:30:57.255415 --- ParallelTerminationStrategy: PID 28445 died... 16:30:57.311877 run iperf3-srv_10.42.42.10(pid=28445): Terminated {rc=256} 16:30:57.322046 --- ParallelTerminationStrategy: PID 28446 died... 16:30:57.377903 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28446): Terminated: ok {rc=0} 16:30:57.388118 --- ParallelTerminationStrategy: PID 28447 died... 16:30:57.443990 run iperf3-srv_10.42.42.10(pid=28447): Terminated {rc=256} 16:30:57.454117 --- ParallelTerminationStrategy: PID 28450 died... 16:30:57.510836 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28450): Terminated: ok {rc=0} 16:30:57.520792 --- ParallelTerminationStrategy: PID 28453 died... 16:30:57.576681 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28453): Terminated: ok {rc=0} 16:30:57.587190 --- ParallelTerminationStrategy: PID 28456 died... 16:30:57.642712 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28456): Terminated: ok {rc=0} 16:30:57.729692 bus /gobi_0: Setting Powered False 16:30:58.837720 bus /gobi_0: Setting Powered False 16:30:59.946852 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=28454): Process ended prematurely: osmo-stp_10.42.42.5(pid=28454) [trial-2379↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28454)]