Failed
gprs:nanobts+band-900.ping_idle_ping.py (from gprs_nanobts+band-900)
Stacktrace
osmo-stp_10.42.42.5(pid=15475): Process ended prematurely: osmo-stp_10.42.42.5(pid=15475) [trial-2380↪gprs:nanobts+band-900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15475)]
Standard Output
---------------------------------------------- trial-2380 gprs:nanobts+band-900 ping_idle_ping.py ---------------------------------------------- 18:52:13.445776 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 18:52:13.457986 tst gprs:nanobts+band-900: Using 1 x bts (candidates: 1) 18:52:13.602657 tst ping_idle_ping.py: using LAC 30800 18:52:13.728859 tst ping_idle_ping.py: using RAC 200 18:52:13.854433 tst ping_idle_ping.py: using CellId 30800 18:52:13.980253 tst ping_idle_ping.py: using BVCI 30801 18:52:14.004716 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 18:52:14.016347 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 18:52:14.027685 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 18:52:14.039087 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 18:52:14.050375 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 18:52:14.061458 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 18:52:14.072869 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 18:52:14.084223 tst gprs:nanobts+band-900: Using 1 x modem (candidates: 4) 18:52:14.376575 tst ping_idle_ping.py:24: start network... 18:52:14.510918 run osmo-hlr_10.42.42.2: Starting osmo-hlr 18:52:15.032469 run create_hlr_db(pid=15469): Launched 18:52:15.219013 bus /gobi_6: Setting Powered False 18:52:16.240388 run create_hlr_db(pid=15469): Terminated: ok {rc=0} 18:52:16.684353 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15471): Launched 18:52:17.035315 run osmo-hlr_10.42.42.2(pid=15472): Launched 18:52:17.197056 run osmo-stp_10.42.42.5: Starting osmo-stp 18:52:17.775551 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15474): Launched 18:52:18.100636 run osmo-stp_10.42.42.5(pid=15475): Launched 18:52:18.217405 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 18:52:18.783059 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15477): Launched 18:52:18.898106 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 18:52:19.181553 run patchelf(pid=15478): Launched 18:52:19.369142 run osmo-stp_10.42.42.5(pid=15475): ERR: Terminated: ERROR {rc=1} [trial-2380↪gprs:nanobts+band-900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15475)] 18:52:19.506466 run osmo-stp_10.42.42.5(pid=15475): stdout: | (launched: 2022-12-12_18:52:17.939485) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:52:19.644026 run osmo-stp_10.42.42.5(pid=15475): stderr: | �[0;m�[38;5;43m20221212185218131 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212185218131 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212185218131 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212185218132 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212185218132 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212185218132 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212185218132 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:52:19.777110 run osmo-stp_10.42.42.5(pid=15475): stdout: | (launched: 2022-12-12_18:52:17.939485) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:52:19.908648 run osmo-stp_10.42.42.5(pid=15475): stderr: | �[0;m�[38;5;43m20221212185218131 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212185218131 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212185218131 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212185218132 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212185218132 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212185218132 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212185218132 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:52:20.061776 run patchelf(pid=15478): Terminating (SIGINT) 18:52:20.242077 run patchelf(pid=15478): Terminated: ok {rc=0} 18:52:20.275060 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=15475): Process ended prematurely: osmo-stp_10.42.42.5(pid=15475) [trial-2380↪gprs:nanobts+band-900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15475)] [trial-2380↪gprs:nanobts+band-900↪ping_idle_ping.py:27] 18:52:20.284704 tst ping_idle_ping.py:27: Test FAILED (6.8 sec) 18:52:20.347888 run osmo-hlr_10.42.42.2(pid=15472): ERR: Terminated: ERROR {rc=237} [trial-2380↪gprs:nanobts+band-900↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=15472)] 18:52:20.399266 run osmo-hlr_10.42.42.2(pid=15472): stdout: | (launched: 2022-12-12_18:52:16.851323) 18:52:20.451354 run osmo-hlr_10.42.42.2(pid=15472): stderr: | �[0;m�[1;31m20221212185217176 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212185217176 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212185217176 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212185217176 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212185217176 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212185217176 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212185217191 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2380/run.2022-12-12_17-41-28/gprs:nanobts+band-900/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212185217208 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212185217208 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212185217208 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 18:52:20.495577 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15471): Terminating (SIGTERM) 18:52:20.537832 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15474): Terminating (SIGTERM) 18:52:20.579899 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15477): Terminating (SIGTERM) 18:52:20.589884 --- ParallelTerminationStrategy: PID 15471 died... 18:52:20.646373 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15471): Terminated: ok {rc=0} 18:52:20.656648 --- ParallelTerminationStrategy: PID 15474 died... 18:52:20.713133 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15474): Terminated: ok {rc=0} 18:52:20.723363 --- ParallelTerminationStrategy: PID 15477 died... 18:52:20.779283 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15477): Terminated: ok {rc=0} 18:52:20.866497 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=15475): Process ended prematurely: osmo-stp_10.42.42.5(pid=15475) [trial-2380↪gprs:nanobts+band-900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15475)]