Failed
gprs:trx-lms-limenet-micro.ping.py (from gprs_trx-lms-limenet-micro)
Stacktrace
osmo-stp_10.42.42.5(pid=22289): Process ended prematurely: osmo-stp_10.42.42.5(pid=22289) [trial-2381↪gprs:trx-lms-limenet-micro↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22289)]
Standard Output
---------------------------------------------- trial-2381 gprs:trx-lms-limenet-micro ping.py ---------------------------------------------- 20:06:04.796335 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 20:06:04.807805 tst gprs:trx-lms-limenet-micro: Using 1 x bts (candidates: 1) 20:06:04.937430 tst ping.py: using LAC 31189 20:06:05.059623 tst ping.py: using RAC 79 20:06:05.181936 tst ping.py: using CellId 31189 20:06:05.305079 tst ping.py: using BVCI 31190 20:06:05.328940 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 20:06:05.340315 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 20:06:05.351585 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 20:06:05.363041 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 20:06:05.374714 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 20:06:05.386163 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 20:06:05.397807 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 20:06:05.409145 tst gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4) 20:06:05.677554 tst ping.py:19: start network... 20:06:05.797405 run osmo-hlr_10.42.42.2: Starting osmo-hlr 20:06:06.263274 run create_hlr_db(pid=22283): Launched 20:06:06.430864 bus /gobi_6: Setting Powered False 20:06:07.452465 run create_hlr_db(pid=22283): Terminated: ok {rc=0} 20:06:07.840693 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22285): Launched 20:06:08.131678 run osmo-hlr_10.42.42.2(pid=22286): Launched 20:06:08.237499 run osmo-stp_10.42.42.5: Starting osmo-stp 20:06:08.744794 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22288): Launched 20:06:09.036351 run osmo-stp_10.42.42.5(pid=22289): Launched 20:06:09.141459 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 20:06:09.648759 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22291): Launched 20:06:09.752120 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 20:06:10.007443 run patchelf(pid=22292): Launched 20:06:10.177581 run osmo-stp_10.42.42.5(pid=22289): ERR: Terminated: ERROR {rc=1} [trial-2381↪gprs:trx-lms-limenet-micro↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22289)] 20:06:10.302653 run osmo-stp_10.42.42.5(pid=22289): stdout: | (launched: 2022-12-12_20:06:08.891781) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:06:10.427454 run osmo-stp_10.42.42.5(pid=22289): stderr: | �[0;m�[38;5;43m20221212200609059 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212200609059 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212200609059 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212200609060 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212200609060 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212200609060 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212200609060 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:06:10.547872 run osmo-stp_10.42.42.5(pid=22289): stdout: | (launched: 2022-12-12_20:06:08.891781) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:06:10.667876 run osmo-stp_10.42.42.5(pid=22289): stderr: | �[0;m�[38;5;43m20221212200609059 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212200609059 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212200609059 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212200609060 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212200609060 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212200609060 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212200609060 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:06:10.806925 run patchelf(pid=22292): Terminating (SIGINT) 20:06:10.969928 run patchelf(pid=22292): Terminated: ok {rc=0} 20:06:11.000064 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=22289): Process ended prematurely: osmo-stp_10.42.42.5(pid=22289) [trial-2381↪gprs:trx-lms-limenet-micro↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22289)] [trial-2381↪gprs:trx-lms-limenet-micro↪ping.py:22] 20:06:11.008572 tst ping.py:22: Test FAILED (6.2 sec) 20:06:11.068269 run osmo-hlr_10.42.42.2(pid=22286): ERR: Terminated: ERROR {rc=237} [trial-2381↪gprs:trx-lms-limenet-micro↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=22286)] 20:06:11.116978 run osmo-hlr_10.42.42.2(pid=22286): stdout: | (launched: 2022-12-12_20:06:07.987673) 20:06:11.166462 run osmo-hlr_10.42.42.2(pid=22286): stderr: | �[0;m�[1;31m20221212200608160 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212200608160 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212200608161 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212200608161 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212200608161 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212200608161 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212200608176 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2381/run.2022-12-12_19-09-05/gprs:trx-lms-limenet-micro/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212200608186 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212200608186 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212200608186 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 20:06:11.208181 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22285): Terminating (SIGTERM) 20:06:11.247861 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22288): Terminating (SIGTERM) 20:06:11.288472 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22291): Terminating (SIGTERM) 20:06:11.297603 --- ParallelTerminationStrategy: PID 22285 died... 20:06:11.350344 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22285): Terminated: ok {rc=0} 20:06:11.359737 --- ParallelTerminationStrategy: PID 22288 died... 20:06:11.412283 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22288): Terminated: ok {rc=0} 20:06:11.421738 --- ParallelTerminationStrategy: PID 22291 died... 20:06:11.474285 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22291): Terminated: ok {rc=0} 20:06:11.557069 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=22289): Process ended prematurely: osmo-stp_10.42.42.5(pid=22289) [trial-2381↪gprs:trx-lms-limenet-micro↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22289)]