Failed
gprs:oc2g+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=18780): Process ended prematurely: osmo-stp_10.42.42.5(pid=18780) [trial-2381↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18780)]
Standard Output
---------------------------------------------- trial-2381 gprs:oc2g+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 19:23:50.661907 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:23:50.674475 tst gprs:oc2g+mod-bts0-egprs: Using 1 x bts (candidates: 1) 19:23:50.811941 tst cs_paging_gprs_active.py: using LAC 30965 19:23:50.947796 tst cs_paging_gprs_active.py: using RAC 110 19:23:51.075999 tst cs_paging_gprs_active.py: using CellId 30965 19:23:51.202997 tst cs_paging_gprs_active.py: using BVCI 30966 19:23:51.229743 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:23:51.241983 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:23:51.254143 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:23:51.267834 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:23:51.280602 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:23:51.293473 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:23:51.306817 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:23:51.319837 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:23:51.333127 tst gprs:oc2g+mod-bts0-egprs: Using 1 x modem (candidates: 4) 19:23:51.456434 tst gprs:oc2g+mod-bts0-egprs: Using 1 x modem (candidates: 4) 19:23:51.759991 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 19:23:51.901161 run iperf3-srv_10.42.42.10: Starting iperf3-srv 19:23:52.255570 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18770): Launched 19:23:52.552895 run iperf3-srv_10.42.42.10(pid=18771): Launched 19:23:52.758460 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 19:23:52.898780 run iperf3-srv_10.42.42.10: Starting iperf3-srv 19:23:53.250176 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18772): Launched 19:23:53.540273 run iperf3-srv_10.42.42.10(pid=18773): Launched 19:23:53.727149 tst cs_paging_gprs_active.py:38: start network... 19:23:53.854363 run osmo-hlr_10.42.42.2: Starting osmo-hlr 19:23:54.370579 run create_hlr_db(pid=18774): Launched 19:23:54.549495 bus /gobi_6: Setting Powered False 19:23:55.574362 run create_hlr_db(pid=18774): Terminated: ok {rc=0} 19:23:56.008405 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18776): Launched 19:23:56.411556 run osmo-hlr_10.42.42.2(pid=18777): Launched 19:23:56.654966 run osmo-stp_10.42.42.5: Starting osmo-stp 19:23:57.284843 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18779): Launched 19:23:57.694000 run osmo-stp_10.42.42.5(pid=18780): Launched 19:23:57.933435 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 19:23:58.539572 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18782): Launched 19:23:58.652551 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 19:23:58.941621 run patchelf(pid=18783): Launched 19:23:59.129246 run osmo-stp_10.42.42.5(pid=18780): ERR: Terminated: ERROR {rc=1} [trial-2381↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18780)] 19:23:59.265095 run osmo-stp_10.42.42.5(pid=18780): stdout: | (launched: 2022-12-12_19:23:57.444567) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:23:59.399799 run osmo-stp_10.42.42.5(pid=18780): stderr: | �[0;m�[38;5;43m20221212192357772 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212192357772 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212192357772 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212192357773 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212192357773 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212192357773 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212192357774 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:23:59.532580 run osmo-stp_10.42.42.5(pid=18780): stdout: | (launched: 2022-12-12_19:23:57.444567) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:23:59.661702 run osmo-stp_10.42.42.5(pid=18780): stderr: | �[0;m�[38;5;43m20221212192357772 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212192357772 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212192357772 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212192357773 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212192357773 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212192357773 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212192357774 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:23:59.812347 run patchelf(pid=18783): Terminating (SIGINT) 19:23:59.989806 run patchelf(pid=18783): Terminated: ok {rc=0} 19:24:00.023150 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=18780): Process ended prematurely: osmo-stp_10.42.42.5(pid=18780) [trial-2381↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18780)] [trial-2381↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 19:24:00.034633 tst cs_paging_gprs_active.py:38: Test FAILED (9.4 sec) 19:24:00.098272 run osmo-hlr_10.42.42.2(pid=18777): ERR: Terminated: ERROR {rc=237} [trial-2381↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=18777)] 19:24:00.150142 run osmo-hlr_10.42.42.2(pid=18777): stdout: | (launched: 2022-12-12_19:23:56.167270) 19:24:00.202579 run osmo-hlr_10.42.42.2(pid=18777): stderr: | �[0;m�[1;31m20221212192356501 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212192356501 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212192356502 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212192356502 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212192356502 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212192356502 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212192356527 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2381/run.2022-12-12_19-09-05/gprs:oc2g+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212192356540 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212192356540 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212192356540 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 19:24:00.248919 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18770): Terminating (SIGTERM) 19:24:00.293284 run iperf3-srv_10.42.42.10(pid=18771): Terminating (SIGTERM) 19:24:00.337934 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18772): Terminating (SIGTERM) 19:24:00.382386 run iperf3-srv_10.42.42.10(pid=18773): Terminating (SIGTERM) 19:24:00.427127 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18776): Terminating (SIGTERM) 19:24:00.472033 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18779): Terminating (SIGTERM) 19:24:00.517247 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18782): Terminating (SIGTERM) 19:24:00.527366 --- ParallelTerminationStrategy: PID 18770 died... 19:24:00.585514 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18770): Terminated: ok {rc=0} 19:24:00.595835 --- ParallelTerminationStrategy: PID 18771 died... 19:24:00.652367 run iperf3-srv_10.42.42.10(pid=18771): Terminated {rc=256} 19:24:00.662949 --- ParallelTerminationStrategy: PID 18772 died... 19:24:00.718438 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18772): Terminated: ok {rc=0} 19:24:00.728737 --- ParallelTerminationStrategy: PID 18773 died... 19:24:00.785174 run iperf3-srv_10.42.42.10(pid=18773): Terminated {rc=256} 19:24:00.795746 --- ParallelTerminationStrategy: PID 18776 died... 19:24:00.852226 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18776): Terminated: ok {rc=0} 19:24:00.863360 --- ParallelTerminationStrategy: PID 18779 died... 19:24:00.919263 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18779): Terminated: ok {rc=0} 19:24:00.930572 --- ParallelTerminationStrategy: PID 18782 died... 19:24:00.987627 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18782): Terminated: ok {rc=0} 19:24:01.112581 bus /gobi_0: Setting Powered False 19:24:02.271753 bus /gobi_0: Setting Powered False 19:24:03.391571 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=18780): Process ended prematurely: osmo-stp_10.42.42.5(pid=18780) [trial-2381↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18780)]