Failed
gprs:sysmo+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=18034): Process ended prematurely: osmo-stp_10.42.42.5(pid=18034) [trial-2381↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18034)]
Standard Output
---------------------------------------------- trial-2381 gprs:sysmo+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 19:16:56.582872 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:16:56.594433 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 19:16:56.742637 tst cs_paging_gprs_active.py: using LAC 30928 19:16:56.862251 tst cs_paging_gprs_active.py: using RAC 73 19:16:56.982803 tst cs_paging_gprs_active.py: using CellId 30928 19:16:57.100765 tst cs_paging_gprs_active.py: using BVCI 30929 19:16:57.124106 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:16:57.135526 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:16:57.146445 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:16:57.157828 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:16:57.168822 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:16:57.180097 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:16:57.191393 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:16:57.202532 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:16:57.213869 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 19:16:57.332827 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 19:16:57.617431 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 19:16:57.744224 run iperf3-srv_10.42.42.10: Starting iperf3-srv 19:16:58.060291 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18021): Launched 19:16:58.321577 run iperf3-srv_10.42.42.10(pid=18022): Launched 19:16:58.506187 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 19:16:58.631867 run iperf3-srv_10.42.42.10: Starting iperf3-srv 19:16:58.947484 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18023): Launched 19:16:59.209580 run iperf3-srv_10.42.42.10(pid=18024): Launched 19:16:59.394337 tst cs_paging_gprs_active.py:38: start network... 19:16:59.520114 run osmo-hlr_10.42.42.2: Starting osmo-hlr 19:17:00.008074 run create_hlr_db(pid=18025): Launched 19:17:00.183536 bus /gobi_6: Setting Powered False 19:17:01.209664 run create_hlr_db(pid=18025): Terminated: ok {rc=0} 19:17:01.641192 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18027): Launched 19:17:01.979636 run osmo-hlr_10.42.42.2(pid=18029): Launched 19:17:02.222242 run osmo-stp_10.42.42.5: Starting osmo-stp 19:17:02.838773 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18033): Launched 19:17:03.188005 run osmo-stp_10.42.42.5(pid=18034): Launched 19:17:03.310045 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 19:17:03.844758 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18036): Launched 19:17:03.953361 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 19:17:04.220726 run patchelf(pid=18037): Launched 19:17:04.400206 run osmo-stp_10.42.42.5(pid=18034): ERR: Terminated: ERROR {rc=1} [trial-2381↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18034)] 19:17:04.531623 run osmo-stp_10.42.42.5(pid=18034): stdout: | (launched: 2022-12-12_19:17:03.005107) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:17:04.663767 run osmo-stp_10.42.42.5(pid=18034): stderr: | �[0;m�[38;5;43m20221212191703198 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212191703198 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212191703199 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212191703199 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212191703200 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212191703200 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212191703200 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:17:04.789725 run osmo-stp_10.42.42.5(pid=18034): stdout: | (launched: 2022-12-12_19:17:03.005107) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:17:04.914733 run osmo-stp_10.42.42.5(pid=18034): stderr: | �[0;m�[38;5;43m20221212191703198 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212191703198 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212191703199 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212191703199 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212191703200 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212191703200 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212191703200 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:17:05.060580 run patchelf(pid=18037): Terminating (SIGINT) 19:17:05.233446 run patchelf(pid=18037): Terminated: ok {rc=0} 19:17:05.265129 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=18034): Process ended prematurely: osmo-stp_10.42.42.5(pid=18034) [trial-2381↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18034)] [trial-2381↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 19:17:05.274524 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 19:17:05.334690 run osmo-hlr_10.42.42.2(pid=18029): ERR: Terminated: ERROR {rc=237} [trial-2381↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=18029)] 19:17:05.383926 run osmo-hlr_10.42.42.2(pid=18029): stdout: | (launched: 2022-12-12_19:17:01.801147) 19:17:05.433646 run osmo-hlr_10.42.42.2(pid=18029): stderr: | �[0;m�[1;31m20221212191702083 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212191702083 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212191702083 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212191702083 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212191702083 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212191702083 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212191702099 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2381/run.2022-12-12_19-09-05/gprs:sysmo+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212191702122 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212191702123 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212191702123 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 19:17:05.475896 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18021): Terminating (SIGTERM) 19:17:05.515687 run iperf3-srv_10.42.42.10(pid=18022): Terminating (SIGTERM) 19:17:05.555513 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18023): Terminating (SIGTERM) 19:17:05.595210 run iperf3-srv_10.42.42.10(pid=18024): Terminating (SIGTERM) 19:17:05.635228 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18027): Terminating (SIGTERM) 19:17:05.674969 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18033): Terminating (SIGTERM) 19:17:05.714859 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18036): Terminating (SIGTERM) 19:17:05.724080 --- ParallelTerminationStrategy: PID 18021 died... 19:17:05.777476 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18021): Terminated: ok {rc=0} 19:17:05.787099 --- ParallelTerminationStrategy: PID 18022 died... 19:17:05.840473 run iperf3-srv_10.42.42.10(pid=18022): Terminated {rc=256} 19:17:05.850279 --- ParallelTerminationStrategy: PID 18023 died... 19:17:05.903166 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18023): Terminated: ok {rc=0} 19:17:05.912648 --- ParallelTerminationStrategy: PID 18024 died... 19:17:05.966050 run iperf3-srv_10.42.42.10(pid=18024): Terminated {rc=256} 19:17:05.975764 --- ParallelTerminationStrategy: PID 18027 died... 19:17:06.028710 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18027): Terminated: ok {rc=0} 19:17:06.038368 --- ParallelTerminationStrategy: PID 18033 died... 19:17:06.091946 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18033): Terminated: ok {rc=0} 19:17:06.101612 --- ParallelTerminationStrategy: PID 18036 died... 19:17:06.154310 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18036): Terminated: ok {rc=0} 19:17:06.243259 bus /gobi_0: Setting Powered False 19:17:07.347967 bus /gobi_0: Setting Powered False 19:17:08.455384 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=18034): Process ended prematurely: osmo-stp_10.42.42.5(pid=18034) [trial-2381↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18034)]