Failed
gprs:sysmo.cs_paging_gprs_active.py (from gprs_sysmo)
Stacktrace
osmo-stp_10.42.42.5(pid=17894): Process ended prematurely: osmo-stp_10.42.42.5(pid=17894) [trial-2381↪gprs:sysmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17894)]
Standard Output
---------------------------------------------- trial-2381 gprs:sysmo cs_paging_gprs_active.py ---------------------------------------------- 19:14:55.964267 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 19:14:55.974864 tst gprs:sysmo: Using 1 x bts (candidates: 1) 19:14:56.099678 tst cs_paging_gprs_active.py: using LAC 30918 19:14:56.229176 tst cs_paging_gprs_active.py: using RAC 63 19:14:56.357498 tst cs_paging_gprs_active.py: using CellId 30918 19:14:56.491286 tst cs_paging_gprs_active.py: using BVCI 30919 19:14:56.516589 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 19:14:56.527800 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 19:14:56.539000 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 19:14:56.550359 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 19:14:56.561735 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 19:14:56.572701 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 19:14:56.583925 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 19:14:56.597623 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 19:14:56.608659 tst gprs:sysmo: Using 1 x modem (candidates: 4) 19:14:56.730144 tst gprs:sysmo: Using 1 x modem (candidates: 4) 19:14:57.015403 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 19:14:57.145890 run iperf3-srv_10.42.42.10: Starting iperf3-srv 19:14:57.469766 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17880): Launched 19:14:57.738193 run iperf3-srv_10.42.42.10(pid=17881): Launched 19:14:57.925874 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 19:14:58.053879 run iperf3-srv_10.42.42.10: Starting iperf3-srv 19:14:58.376584 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17882): Launched 19:14:58.643674 run iperf3-srv_10.42.42.10(pid=17883): Launched 19:14:58.831375 tst cs_paging_gprs_active.py:38: start network... 19:14:58.959605 run osmo-hlr_10.42.42.2: Starting osmo-hlr 19:14:59.459047 run create_hlr_db(pid=17884): Launched 19:14:59.636743 bus /sierra_2: Setting Powered False 19:15:00.658024 run create_hlr_db(pid=17884): Terminated: ok {rc=0} 19:15:01.135505 run pcap-recorder_any(filters='host 10.42.42.2')(pid=17887): Launched 19:15:01.607586 run osmo-hlr_10.42.42.2(pid=17888): Launched 19:15:01.833868 run osmo-stp_10.42.42.5: Starting osmo-stp 19:15:02.473331 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=17893): Launched 19:15:02.784131 run osmo-stp_10.42.42.5(pid=17894): Launched 19:15:02.907318 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 19:15:04.430768 run pcap-recorder_any(filters='host 10.42.42.6')(pid=17896): Launched 19:15:04.540223 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 19:15:04.813582 run patchelf(pid=17897): Launched 19:15:04.994843 run osmo-stp_10.42.42.5(pid=17894): ERR: Terminated: ERROR {rc=1} [trial-2381↪gprs:sysmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17894)] 19:15:05.127156 run osmo-stp_10.42.42.5(pid=17894): stdout: | (launched: 2022-12-12_19:15:02.630492) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:15:05.259494 run osmo-stp_10.42.42.5(pid=17894): stderr: | �[0;m�[38;5;43m20221212191502805 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212191502806 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212191502806 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212191502806 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212191502807 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212191502807 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212191502807 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:15:05.387017 run osmo-stp_10.42.42.5(pid=17894): stdout: | (launched: 2022-12-12_19:15:02.630492) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:15:05.513458 run osmo-stp_10.42.42.5(pid=17894): stderr: | �[0;m�[38;5;43m20221212191502805 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212191502806 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212191502806 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212191502806 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212191502807 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212191502807 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212191502807 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:15:05.661161 run patchelf(pid=17897): Terminating (SIGINT) 19:15:05.834584 run patchelf(pid=17897): Terminated: ok {rc=0} 19:15:05.866192 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=17894): Process ended prematurely: osmo-stp_10.42.42.5(pid=17894) [trial-2381↪gprs:sysmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17894)] [trial-2381↪gprs:sysmo↪cs_paging_gprs_active.py:38] 19:15:05.875324 tst cs_paging_gprs_active.py:38: Test FAILED (9.9 sec) 19:15:05.936139 run osmo-hlr_10.42.42.2(pid=17888): ERR: Terminated: ERROR {rc=237} [trial-2381↪gprs:sysmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=17888)] 19:15:05.986083 run osmo-hlr_10.42.42.2(pid=17888): stdout: | (launched: 2022-12-12_19:15:01.307938) 19:15:06.036592 run osmo-hlr_10.42.42.2(pid=17888): stderr: | �[0;m�[1;31m20221212191501670 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212191501670 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212191501670 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212191501670 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212191501670 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212191501670 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212191501695 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2381/run.2022-12-12_19-09-05/gprs:sysmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212191501716 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212191501716 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212191501719 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 19:15:06.079367 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17880): Terminating (SIGTERM) 19:15:06.119539 run iperf3-srv_10.42.42.10(pid=17881): Terminating (SIGTERM) 19:15:06.159834 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17882): Terminating (SIGTERM) 19:15:06.199964 run iperf3-srv_10.42.42.10(pid=17883): Terminating (SIGTERM) 19:15:06.240132 run pcap-recorder_any(filters='host 10.42.42.2')(pid=17887): Terminating (SIGTERM) 19:15:06.280885 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=17893): Terminating (SIGTERM) 19:15:06.321205 run pcap-recorder_any(filters='host 10.42.42.6')(pid=17896): Terminating (SIGTERM) 19:15:06.330538 --- ParallelTerminationStrategy: PID 17880 died... 19:15:06.384563 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17880): Terminated: ok {rc=0} 19:15:06.394220 --- ParallelTerminationStrategy: PID 17881 died... 19:15:06.448474 run iperf3-srv_10.42.42.10(pid=17881): Terminated {rc=256} 19:15:06.458162 --- ParallelTerminationStrategy: PID 17882 died... 19:15:06.511912 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17882): Terminated: ok {rc=0} 19:15:06.521609 --- ParallelTerminationStrategy: PID 17883 died... 19:15:06.575197 run iperf3-srv_10.42.42.10(pid=17883): Terminated {rc=256} 19:15:06.584812 --- ParallelTerminationStrategy: PID 17887 died... 19:15:06.638135 run pcap-recorder_any(filters='host 10.42.42.2')(pid=17887): Terminated: ok {rc=0} 19:15:06.647767 --- ParallelTerminationStrategy: PID 17893 died... 19:15:06.702380 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=17893): Terminated: ok {rc=0} 19:15:06.712230 --- ParallelTerminationStrategy: PID 17896 died... 19:15:06.766012 run pcap-recorder_any(filters='host 10.42.42.6')(pid=17896): Terminated: ok {rc=0} 19:15:06.855789 bus /gobi_0: Setting Powered False 19:15:07.962717 bus /gobi_0: Setting Powered False 19:15:09.076416 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=17894): Process ended prematurely: osmo-stp_10.42.42.5(pid=17894) [trial-2381↪gprs:sysmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17894)]