Failed
gprs:oc2g+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=26041): Process ended prematurely: osmo-stp_10.42.42.5(pid=26041) [trial-2382↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26041)]
Standard Output
---------------------------------------------- trial-2382 gprs:oc2g+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 20:51:35.173964 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:51:35.184480 tst gprs:oc2g+mod-bts0-egprs: Using 1 x bts (candidates: 1) 20:51:35.307353 tst cs_paging_gprs_active.py: using LAC 31426 20:51:35.428122 tst cs_paging_gprs_active.py: using RAC 61 20:51:35.548938 tst cs_paging_gprs_active.py: using CellId 31426 20:51:35.668657 tst cs_paging_gprs_active.py: using BVCI 31427 20:51:35.692061 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:51:35.702879 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:51:35.713648 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:51:35.724528 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:51:35.735365 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:51:35.746221 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:51:35.757332 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:51:35.767553 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:51:35.778890 tst gprs:oc2g+mod-bts0-egprs: Using 1 x modem (candidates: 4) 20:51:35.896014 tst gprs:oc2g+mod-bts0-egprs: Using 1 x modem (candidates: 4) 20:51:36.175978 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 20:51:36.305405 run iperf3-srv_10.42.42.10: Starting iperf3-srv 20:51:36.621896 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26031): Launched 20:51:36.886766 run iperf3-srv_10.42.42.10(pid=26032): Launched 20:51:37.075131 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 20:51:37.204163 run iperf3-srv_10.42.42.10: Starting iperf3-srv 20:51:37.522398 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26033): Launched 20:51:37.787031 run iperf3-srv_10.42.42.10(pid=26034): Launched 20:51:37.974286 tst cs_paging_gprs_active.py:38: start network... 20:51:38.102627 run osmo-hlr_10.42.42.2: Starting osmo-hlr 20:51:38.587934 run create_hlr_db(pid=26035): Launched 20:51:38.765566 bus /gobi_6: Setting Powered False 20:51:39.787117 run create_hlr_db(pid=26035): Terminated: ok {rc=0} 20:51:40.222711 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26037): Launched 20:51:40.553626 run osmo-hlr_10.42.42.2(pid=26038): Launched 20:51:40.678080 run osmo-stp_10.42.42.5: Starting osmo-stp 20:51:41.253481 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26040): Launched 20:51:41.585944 run osmo-stp_10.42.42.5(pid=26041): Launched 20:51:41.707480 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 20:51:42.246419 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26043): Launched 20:51:42.357719 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 20:51:42.626483 run patchelf(pid=26044): Launched 20:51:42.806385 run osmo-stp_10.42.42.5(pid=26041): ERR: Terminated: ERROR {rc=1} [trial-2382↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26041)] 20:51:42.938560 run osmo-stp_10.42.42.5(pid=26041): stdout: | (launched: 2022-12-12_20:51:41.421224) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:51:43.070584 run osmo-stp_10.42.42.5(pid=26041): stderr: | �[0;m�[38;5;43m20221212205141609 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212205141609 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212205141610 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212205141610 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212205141611 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212205141611 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212205141611 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:51:43.198655 run osmo-stp_10.42.42.5(pid=26041): stdout: | (launched: 2022-12-12_20:51:41.421224) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:51:43.325259 run osmo-stp_10.42.42.5(pid=26041): stderr: | �[0;m�[38;5;43m20221212205141609 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212205141609 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212205141610 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212205141610 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212205141611 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212205141611 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212205141611 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:51:43.472626 run patchelf(pid=26044): Terminating (SIGINT) 20:51:43.645872 run patchelf(pid=26044): Terminated: ok {rc=0} 20:51:43.677608 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=26041): Process ended prematurely: osmo-stp_10.42.42.5(pid=26041) [trial-2382↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26041)] [trial-2382↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 20:51:43.686836 tst cs_paging_gprs_active.py:38: Test FAILED (8.5 sec) 20:51:43.748690 run osmo-hlr_10.42.42.2(pid=26038): ERR: Terminated: ERROR {rc=237} [trial-2382↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=26038)] 20:51:43.799056 run osmo-hlr_10.42.42.2(pid=26038): stdout: | (launched: 2022-12-12_20:51:40.391158) 20:51:43.850287 run osmo-hlr_10.42.42.2(pid=26038): stderr: | �[0;m�[1;31m20221212205140586 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212205140586 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212205140586 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212205140586 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212205140586 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212205140586 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212205140598 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2382/run.2022-12-12_20-36-34/gprs:oc2g+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212205140607 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212205140608 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212205140608 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 20:51:43.893788 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26031): Terminating (SIGTERM) 20:51:43.934524 run iperf3-srv_10.42.42.10(pid=26032): Terminating (SIGTERM) 20:51:43.975266 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26033): Terminating (SIGTERM) 20:51:44.016030 run iperf3-srv_10.42.42.10(pid=26034): Terminating (SIGTERM) 20:51:44.056865 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26037): Terminating (SIGTERM) 20:51:44.097619 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26040): Terminating (SIGTERM) 20:51:44.138574 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26043): Terminating (SIGTERM) 20:51:44.148124 --- ParallelTerminationStrategy: PID 26031 died... 20:51:44.203283 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26031): Terminated: ok {rc=0} 20:51:44.213014 --- ParallelTerminationStrategy: PID 26032 died... 20:51:44.267087 run iperf3-srv_10.42.42.10(pid=26032): Terminated {rc=256} 20:51:44.277422 --- ParallelTerminationStrategy: PID 26033 died... 20:51:44.331750 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26033): Terminated: ok {rc=0} 20:51:44.342260 --- ParallelTerminationStrategy: PID 26034 died... 20:51:44.396617 run iperf3-srv_10.42.42.10(pid=26034): Terminated {rc=256} 20:51:44.406311 --- ParallelTerminationStrategy: PID 26037 died... 20:51:44.459992 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26037): Terminated: ok {rc=0} 20:51:44.469842 --- ParallelTerminationStrategy: PID 26040 died... 20:51:44.523740 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26040): Terminated: ok {rc=0} 20:51:44.533737 --- ParallelTerminationStrategy: PID 26043 died... 20:51:44.588743 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26043): Terminated: ok {rc=0} 20:51:44.677893 bus /gobi_0: Setting Powered False 20:51:45.782493 bus /gobi_0: Setting Powered False 20:51:46.895671 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=26041): Process ended prematurely: osmo-stp_10.42.42.5(pid=26041) [trial-2382↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26041)]