Failed
gprs:sysmo+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=25487): Process ended prematurely: osmo-stp_10.42.42.5(pid=25487) [trial-2382↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25487)]
Standard Output
---------------------------------------------- trial-2382 gprs:sysmo+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 20:43:31.239429 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:43:31.251475 tst gprs:sysmo+mod-bts0-egprs: Using 1 x bts (candidates: 1) 20:43:31.389676 tst cs_paging_gprs_active.py: using LAC 31384 20:43:31.521600 tst cs_paging_gprs_active.py: using RAC 19 20:43:31.653298 tst cs_paging_gprs_active.py: using CellId 31384 20:43:31.782980 tst cs_paging_gprs_active.py: using BVCI 31385 20:43:31.809032 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:43:31.821134 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:43:31.833424 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:43:31.845445 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:43:31.857986 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:43:31.870140 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:43:31.882241 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:43:31.895349 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:43:31.908151 tst gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4) 20:43:32.030901 tst gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4) 20:43:32.366985 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 20:43:32.512670 run iperf3-srv_10.42.42.10: Starting iperf3-srv 20:43:32.868116 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25477): Launched 20:43:33.164921 run iperf3-srv_10.42.42.10(pid=25478): Launched 20:43:33.377397 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 20:43:33.522588 run iperf3-srv_10.42.42.10: Starting iperf3-srv 20:43:33.878750 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25479): Launched 20:43:34.175138 run iperf3-srv_10.42.42.10(pid=25480): Launched 20:43:34.387108 tst cs_paging_gprs_active.py:38: start network... 20:43:34.531595 run osmo-hlr_10.42.42.2: Starting osmo-hlr 20:43:35.080660 run create_hlr_db(pid=25481): Launched 20:43:35.279017 bus /gobi_6: Setting Powered False 20:43:36.299972 run create_hlr_db(pid=25481): Terminated: ok {rc=0} 20:43:36.755726 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25483): Launched 20:43:37.101388 run osmo-hlr_10.42.42.2(pid=25484): Launched 20:43:37.226596 run osmo-stp_10.42.42.5: Starting osmo-stp 20:43:37.822023 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25486): Launched 20:43:38.169272 run osmo-stp_10.42.42.5(pid=25487): Launched 20:43:38.294294 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 20:43:38.893131 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25489): Launched 20:43:39.016698 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 20:43:39.315656 run patchelf(pid=25490): Launched 20:43:39.515234 run osmo-stp_10.42.42.5(pid=25487): ERR: Terminated: ERROR {rc=1} [trial-2382↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25487)] 20:43:39.660841 run osmo-stp_10.42.42.5(pid=25487): stdout: | (launched: 2022-12-12_20:43:37.996809) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:43:39.806814 run osmo-stp_10.42.42.5(pid=25487): stderr: | �[0;m�[38;5;43m20221212204338194 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212204338195 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212204338195 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212204338195 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212204338196 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212204338196 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212204338196 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:43:39.948605 run osmo-stp_10.42.42.5(pid=25487): stdout: | (launched: 2022-12-12_20:43:37.996809) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:43:40.089185 run osmo-stp_10.42.42.5(pid=25487): stderr: | �[0;m�[38;5;43m20221212204338194 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212204338195 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212204338195 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212204338195 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212204338196 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212204338196 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212204338196 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:43:40.252647 run patchelf(pid=25490): Terminating (SIGINT) 20:43:40.445073 run patchelf(pid=25490): Terminated: ok {rc=0} 20:43:40.480285 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=25487): Process ended prematurely: osmo-stp_10.42.42.5(pid=25487) [trial-2382↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25487)] [trial-2382↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 20:43:40.490386 tst cs_paging_gprs_active.py:38: Test FAILED (9.3 sec) 20:43:40.555178 run osmo-hlr_10.42.42.2(pid=25484): ERR: Terminated: ERROR {rc=237} [trial-2382↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=25484)] 20:43:40.608156 run osmo-hlr_10.42.42.2(pid=25484): stdout: | (launched: 2022-12-12_20:43:36.931255) 20:43:40.661720 run osmo-hlr_10.42.42.2(pid=25484): stderr: | �[0;m�[1;31m20221212204337134 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212204337134 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212204337134 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212204337134 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212204337135 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212204337135 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212204337192 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2382/run.2022-12-12_20-36-34/gprs:sysmo+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212204337202 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212204337203 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212204337203 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 20:43:40.707679 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25477): Terminating (SIGTERM) 20:43:40.750822 run iperf3-srv_10.42.42.10(pid=25478): Terminating (SIGTERM) 20:43:40.794080 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25479): Terminating (SIGTERM) 20:43:40.837076 run iperf3-srv_10.42.42.10(pid=25480): Terminating (SIGTERM) 20:43:40.880159 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25483): Terminating (SIGTERM) 20:43:40.923507 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25486): Terminating (SIGTERM) 20:43:40.966641 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25489): Terminating (SIGTERM) 20:43:40.976623 --- ParallelTerminationStrategy: PID 25477 died... 20:43:41.034535 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25477): Terminated: ok {rc=0} 20:43:41.044804 --- ParallelTerminationStrategy: PID 25478 died... 20:43:41.101872 run iperf3-srv_10.42.42.10(pid=25478): Terminated {rc=256} 20:43:41.112194 --- ParallelTerminationStrategy: PID 25479 died... 20:43:41.169773 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25479): Terminated: ok {rc=0} 20:43:41.179997 --- ParallelTerminationStrategy: PID 25480 died... 20:43:41.237071 run iperf3-srv_10.42.42.10(pid=25480): Terminated {rc=256} 20:43:41.247243 --- ParallelTerminationStrategy: PID 25483 died... 20:43:41.304419 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25483): Terminated: ok {rc=0} 20:43:41.314802 --- ParallelTerminationStrategy: PID 25486 died... 20:43:41.372496 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25486): Terminated: ok {rc=0} 20:43:41.383146 --- ParallelTerminationStrategy: PID 25489 died... 20:43:41.440431 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25489): Terminated: ok {rc=0} 20:43:41.530982 bus /gobi_0: Setting Powered False 20:43:42.640699 bus /gobi_0: Setting Powered False 20:43:43.755450 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=25487): Process ended prematurely: osmo-stp_10.42.42.5(pid=25487) [trial-2382↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25487)]