Failed
gprs:trx-umtrx+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=28964): Process ended prematurely: osmo-stp_10.42.42.5(pid=28964) [trial-2382↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28964)]
Standard Output
---------------------------------------------- trial-2382 gprs:trx-umtrx+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 21:17:51.779116 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 21:17:51.790182 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x bts (candidates: 1) 21:17:51.933319 tst cs_paging_gprs_active.py: using LAC 31563 21:17:52.067465 tst cs_paging_gprs_active.py: using RAC 198 21:17:52.199860 tst cs_paging_gprs_active.py: using CellId 31563 21:17:52.334534 tst cs_paging_gprs_active.py: using BVCI 31564 21:17:52.360839 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 21:17:52.372560 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 21:17:52.383931 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 21:17:52.395678 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 21:17:52.407139 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 21:17:52.418696 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 21:17:52.430432 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 21:17:52.441884 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 21:17:52.453683 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x modem (candidates: 4) 21:17:52.576596 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x modem (candidates: 4) 21:17:52.868389 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 21:17:53.001320 run iperf3-srv_10.42.42.10: Starting iperf3-srv 21:17:53.329398 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28954): Launched 21:17:53.603808 run iperf3-srv_10.42.42.10(pid=28955): Launched 21:17:53.797439 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 21:17:53.929929 run iperf3-srv_10.42.42.10: Starting iperf3-srv 21:17:54.260326 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28956): Launched 21:17:54.533575 run iperf3-srv_10.42.42.10(pid=28957): Launched 21:17:54.726700 tst cs_paging_gprs_active.py:38: start network... 21:17:54.859594 run osmo-hlr_10.42.42.2: Starting osmo-hlr 21:17:55.367639 run create_hlr_db(pid=28958): Launched 21:17:55.548755 bus /gobi_6: Setting Powered False 21:17:56.571203 run create_hlr_db(pid=28958): Terminated: ok {rc=0} 21:17:56.993321 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28960): Launched 21:17:57.311109 run osmo-hlr_10.42.42.2(pid=28961): Launched 21:17:57.428060 run osmo-stp_10.42.42.5: Starting osmo-stp 21:17:57.977148 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28963): Launched 21:17:58.294830 run osmo-stp_10.42.42.5(pid=28964): Launched 21:17:58.410614 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 21:17:58.962281 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28966): Launched 21:17:59.075200 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 21:17:59.351660 run patchelf(pid=28967): Launched 21:17:59.535793 run osmo-stp_10.42.42.5(pid=28964): ERR: Terminated: ERROR {rc=1} [trial-2382↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28964)] 21:17:59.670113 run osmo-stp_10.42.42.5(pid=28964): stdout: | (launched: 2022-12-12_21:17:58.137729) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 21:17:59.804571 run osmo-stp_10.42.42.5(pid=28964): stderr: | �[0;m�[38;5;43m20221212211758310 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212211758311 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212211758311 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212211758311 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212211758312 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212211758312 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212211758312 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 21:17:59.935123 run osmo-stp_10.42.42.5(pid=28964): stdout: | (launched: 2022-12-12_21:17:58.137729) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 21:18:00.063893 run osmo-stp_10.42.42.5(pid=28964): stderr: | �[0;m�[38;5;43m20221212211758310 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212211758311 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212211758311 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212211758311 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212211758312 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212211758312 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212211758312 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 21:18:00.214702 run patchelf(pid=28967): Terminating (SIGINT) 21:18:00.392419 run patchelf(pid=28967): Terminated: ok {rc=0} 21:18:00.424851 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=28964): Process ended prematurely: osmo-stp_10.42.42.5(pid=28964) [trial-2382↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28964)] [trial-2382↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 21:18:00.434164 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 21:18:00.495345 run osmo-hlr_10.42.42.2(pid=28961): ERR: Terminated: ERROR {rc=237} [trial-2382↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=28961)] 21:18:00.545278 run osmo-hlr_10.42.42.2(pid=28961): stdout: | (launched: 2022-12-12_21:17:57.154020) 21:18:00.595979 run osmo-hlr_10.42.42.2(pid=28961): stderr: | �[0;m�[1;31m20221212211757337 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212211757337 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212211757337 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212211757337 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212211757337 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212211757337 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212211757348 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2382/run.2022-12-12_20-36-34/gprs:trx-umtrx+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212211757357 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212211757357 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212211757357 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 21:18:00.638742 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28954): Terminating (SIGTERM) 21:18:00.679132 run iperf3-srv_10.42.42.10(pid=28955): Terminating (SIGTERM) 21:18:00.719482 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28956): Terminating (SIGTERM) 21:18:00.759773 run iperf3-srv_10.42.42.10(pid=28957): Terminating (SIGTERM) 21:18:00.800847 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28960): Terminating (SIGTERM) 21:18:00.841573 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28963): Terminating (SIGTERM) 21:18:00.882636 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28966): Terminating (SIGTERM) 21:18:00.892047 --- ParallelTerminationStrategy: PID 28954 died... 21:18:00.947014 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28954): Terminated: ok {rc=0} 21:18:00.957144 --- ParallelTerminationStrategy: PID 28955 died... 21:18:01.011769 run iperf3-srv_10.42.42.10(pid=28955): Terminated {rc=256} 21:18:01.021934 --- ParallelTerminationStrategy: PID 28956 died... 21:18:01.076767 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28956): Terminated: ok {rc=0} 21:18:01.086933 --- ParallelTerminationStrategy: PID 28957 died... 21:18:01.141832 run iperf3-srv_10.42.42.10(pid=28957): Terminated {rc=256} 21:18:01.151972 --- ParallelTerminationStrategy: PID 28960 died... 21:18:01.207307 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28960): Terminated: ok {rc=0} 21:18:01.217611 --- ParallelTerminationStrategy: PID 28963 died... 21:18:01.272738 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28963): Terminated: ok {rc=0} 21:18:01.283039 --- ParallelTerminationStrategy: PID 28966 died... 21:18:01.338098 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28966): Terminated: ok {rc=0} 21:18:01.425539 bus /gobi_0: Setting Powered False 21:18:02.528421 bus /gobi_0: Setting Powered False 21:18:03.642578 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=28964): Process ended prematurely: osmo-stp_10.42.42.5(pid=28964) [trial-2382↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28964)]