Failed
gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend.iperf3.py (from gprs_nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=16758): Process ended prematurely: osmo-stp_10.42.42.5(pid=16758) [trial-2384↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16758)]
Standard Output
---------------------------------------------- trial-2384 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend iperf3.py ---------------------------------------------- 01:23:15.191092 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 01:23:15.203750 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 01:23:15.351479 tst iperf3.py: using LAC 32656 01:23:15.479307 tst iperf3.py: using RAC 16 01:23:15.608467 tst iperf3.py: using CellId 32656 01:23:15.735432 tst iperf3.py: using BVCI 32657 01:23:15.760472 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 01:23:15.772409 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 01:23:15.784156 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 01:23:15.796639 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 01:23:15.808563 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 01:23:15.821123 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 01:23:15.836285 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 01:23:15.861377 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 01:23:15.873746 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 01:23:16.188739 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 01:23:16.320883 run iperf3-srv_10.42.42.10: Starting iperf3-srv 01:23:16.674200 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16750): Launched 01:23:16.942317 run iperf3-srv_10.42.42.10(pid=16751): Launched 01:23:17.132200 tst iperf3.py:8: start network... 01:23:17.259235 run osmo-hlr_10.42.42.2: Starting osmo-hlr 01:23:17.749259 run create_hlr_db(pid=16752): Launched 01:23:17.923214 bus /gobi_6: Setting Powered False 01:23:18.946490 run create_hlr_db(pid=16752): Terminated: ok {rc=0} 01:23:19.378463 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16754): Launched 01:23:19.705372 run osmo-hlr_10.42.42.2(pid=16755): Launched 01:23:19.827306 run osmo-stp_10.42.42.5: Starting osmo-stp 01:23:20.394735 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16757): Launched 01:23:20.723659 run osmo-stp_10.42.42.5(pid=16758): Launched 01:23:20.844366 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 01:23:21.414688 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16760): Launched 01:23:21.531755 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 01:23:21.818303 run patchelf(pid=16761): Launched 01:23:22.009306 run osmo-stp_10.42.42.5(pid=16758): ERR: Terminated: ERROR {rc=1} [trial-2384↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16758)] 01:23:22.148085 run osmo-stp_10.42.42.5(pid=16758): stdout: | (launched: 2022-12-13_01:23:20.560465) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:23:22.287364 run osmo-stp_10.42.42.5(pid=16758): stderr: | �[0;m�[38;5;43m20221213012320754 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213012320754 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213012320754 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213012320755 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213012320755 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213012320755 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213012320755 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:23:22.422511 run osmo-stp_10.42.42.5(pid=16758): stdout: | (launched: 2022-12-13_01:23:20.560465) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:23:22.556645 run osmo-stp_10.42.42.5(pid=16758): stderr: | �[0;m�[38;5;43m20221213012320754 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213012320754 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213012320754 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213012320755 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213012320755 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213012320755 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213012320755 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:23:22.713848 run patchelf(pid=16761): Terminating (SIGINT) 01:23:22.897083 run patchelf(pid=16761): Terminated: ok {rc=0} 01:23:22.930775 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=16758): Process ended prematurely: osmo-stp_10.42.42.5(pid=16758) [trial-2384↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16758)] [trial-2384↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8] 01:23:22.940678 tst iperf3.py:8: Test FAILED (7.8 sec) 01:23:23.005065 run osmo-hlr_10.42.42.2(pid=16755): ERR: Terminated: ERROR {rc=237} [trial-2384↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=16755)] 01:23:23.057497 run osmo-hlr_10.42.42.2(pid=16755): stdout: | (launched: 2022-12-13_01:23:19.544630) 01:23:23.110429 run osmo-hlr_10.42.42.2(pid=16755): stderr: | �[0;m�[1;31m20221213012319736 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213012319736 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213012319737 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213012319737 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213012319737 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213012319737 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213012319749 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2384/run.2022-12-13_00-09-58/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213012319758 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213012319758 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213012319758 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 01:23:23.155317 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16750): Terminating (SIGTERM) 01:23:23.197333 run iperf3-srv_10.42.42.10(pid=16751): Terminating (SIGTERM) 01:23:23.239857 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16754): Terminating (SIGTERM) 01:23:23.282160 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16757): Terminating (SIGTERM) 01:23:23.324827 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16760): Terminating (SIGTERM) 01:23:23.334595 --- ParallelTerminationStrategy: PID 16750 died... 01:23:23.390937 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16750): Terminated: ok {rc=0} 01:23:23.400822 --- ParallelTerminationStrategy: PID 16751 died... 01:23:23.457101 run iperf3-srv_10.42.42.10(pid=16751): Terminated {rc=256} 01:23:23.467014 --- ParallelTerminationStrategy: PID 16754 died... 01:23:23.522976 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16754): Terminated: ok {rc=0} 01:23:23.533175 --- ParallelTerminationStrategy: PID 16757 died... 01:23:23.589649 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16757): Terminated: ok {rc=0} 01:23:23.599923 --- ParallelTerminationStrategy: PID 16760 died... 01:23:23.655794 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16760): Terminated: ok {rc=0} 01:23:23.742614 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=16758): Process ended prematurely: osmo-stp_10.42.42.5(pid=16758) [trial-2384↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16758)]