Failed
gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend.ping_idle_ping.py (from gprs_trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=12225): Process ended prematurely: osmo-stp_10.42.42.5(pid=12225) [trial-2384↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12225)]
Standard Output
---------------------------------------------- trial-2384 gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend ping_idle_ping.py ---------------------------------------------- 00:37:08.179977 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 00:37:08.192457 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 00:37:08.344614 tst ping_idle_ping.py: using LAC 32413 00:37:08.476023 tst ping_idle_ping.py: using RAC 28 00:37:08.602602 tst ping_idle_ping.py: using CellId 32413 00:37:08.730051 tst ping_idle_ping.py: using BVCI 32414 00:37:08.755298 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 00:37:08.767179 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 00:37:08.778973 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 00:37:08.791002 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 00:37:08.802922 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 00:37:08.814853 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 00:37:08.827028 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 00:37:08.839121 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 00:37:09.137893 tst ping_idle_ping.py:24: start network... 00:37:09.275162 run osmo-hlr_10.42.42.2: Starting osmo-hlr 00:37:09.791532 run create_hlr_db(pid=12219): Launched 00:37:09.981081 bus /gobi_6: Setting Powered False 00:37:11.000727 run create_hlr_db(pid=12219): Terminated: ok {rc=0} 00:37:11.409540 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12221): Launched 00:37:11.715863 run osmo-hlr_10.42.42.2(pid=12222): Launched 00:37:11.837407 run osmo-stp_10.42.42.5: Starting osmo-stp 00:37:12.377962 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12224): Launched 00:37:12.683490 run osmo-stp_10.42.42.5(pid=12225): Launched 00:37:12.795157 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 00:37:13.328334 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12227): Launched 00:37:13.436472 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 00:37:13.703272 run patchelf(pid=12228): Launched 00:37:13.881960 run osmo-stp_10.42.42.5(pid=12225): ERR: Terminated: ERROR {rc=1} [trial-2384↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12225)] 00:37:14.012357 run osmo-stp_10.42.42.5(pid=12225): stdout: | (launched: 2022-12-13_00:37:12.532742) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:37:14.142855 run osmo-stp_10.42.42.5(pid=12225): stderr: | �[0;m�[38;5;43m20221213003712699 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213003712699 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213003712699 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213003712699 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213003712700 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213003712700 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213003712700 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:37:14.268634 run osmo-stp_10.42.42.5(pid=12225): stdout: | (launched: 2022-12-13_00:37:12.532742) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:37:14.393339 run osmo-stp_10.42.42.5(pid=12225): stderr: | �[0;m�[38;5;43m20221213003712699 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213003712699 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213003712699 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213003712699 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213003712700 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213003712700 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213003712700 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:37:14.539349 run patchelf(pid=12228): Terminating (SIGINT) 00:37:14.711296 run patchelf(pid=12228): Terminated: ok {rc=0} 00:37:14.742441 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=12225): Process ended prematurely: osmo-stp_10.42.42.5(pid=12225) [trial-2384↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12225)] [trial-2384↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪ping_idle_ping.py:27] 00:37:14.751157 tst ping_idle_ping.py:27: Test FAILED (6.6 sec) 00:37:14.811605 run osmo-hlr_10.42.42.2(pid=12222): ERR: Terminated: ERROR {rc=237} [trial-2384↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=12222)] 00:37:14.861023 run osmo-hlr_10.42.42.2(pid=12222): stdout: | (launched: 2022-12-13_00:37:11.564725) 00:37:14.910979 run osmo-hlr_10.42.42.2(pid=12222): stderr: | �[0;m�[1;31m20221213003711737 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213003711737 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213003711737 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213003711737 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213003711737 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213003711738 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213003711750 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2384/run.2022-12-13_00-09-58/gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213003711760 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213003711760 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213003711760 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 00:37:14.953422 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12221): Terminating (SIGTERM) 00:37:14.993322 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12224): Terminating (SIGTERM) 00:37:15.033317 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12227): Terminating (SIGTERM) 00:37:15.042290 --- ParallelTerminationStrategy: PID 12221 died... 00:37:15.095368 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12221): Terminated: ok {rc=0} 00:37:15.104877 --- ParallelTerminationStrategy: PID 12224 died... 00:37:15.157988 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12224): Terminated: ok {rc=0} 00:37:15.167535 --- ParallelTerminationStrategy: PID 12227 died... 00:37:15.220454 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12227): Terminated: ok {rc=0} 00:37:15.309809 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=12225): Process ended prematurely: osmo-stp_10.42.42.5(pid=12225) [trial-2384↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12225)]