Failed
gprs:trx-sysmocell5000+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-sysmocell5000+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=12996): Process ended prematurely: osmo-stp_10.42.42.5(pid=12996) [trial-2384↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12996)]
Standard Output
---------------------------------------------- trial-2384 gprs:trx-sysmocell5000+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 00:44:17.377541 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:44:17.388904 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 00:44:17.549391 tst cs_paging_gprs_active.py: using LAC 32451 00:44:17.670474 tst cs_paging_gprs_active.py: using RAC 66 00:44:17.796029 tst cs_paging_gprs_active.py: using CellId 32451 00:44:17.917325 tst cs_paging_gprs_active.py: using BVCI 32452 00:44:17.940832 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:44:17.951856 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:44:17.962831 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:44:17.973754 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:44:17.984623 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:44:17.995454 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:44:18.006443 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:44:18.017269 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:44:18.028295 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 00:44:18.151218 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 00:44:18.452544 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 00:44:18.591239 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:44:18.933464 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12986): Launched 00:44:19.220341 run iperf3-srv_10.42.42.10(pid=12987): Launched 00:44:19.425018 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 00:44:19.564265 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:44:19.908084 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12988): Launched 00:44:20.193306 run iperf3-srv_10.42.42.10(pid=12989): Launched 00:44:20.395653 tst cs_paging_gprs_active.py:38: start network... 00:44:20.534312 run osmo-hlr_10.42.42.2: Starting osmo-hlr 00:44:21.056815 run create_hlr_db(pid=12990): Launched 00:44:21.248212 bus /gobi_6: Setting Powered False 00:44:22.269209 run create_hlr_db(pid=12990): Terminated: ok {rc=0} 00:44:22.708032 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12992): Launched 00:44:23.039318 run osmo-hlr_10.42.42.2(pid=12993): Launched 00:44:23.161626 run osmo-stp_10.42.42.5: Starting osmo-stp 00:44:23.734837 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12995): Launched 00:44:24.064817 run osmo-stp_10.42.42.5(pid=12996): Launched 00:44:24.185330 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 00:44:24.761296 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12998): Launched 00:44:24.879728 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 00:44:25.167914 run patchelf(pid=12999): Launched 00:44:25.359909 run osmo-stp_10.42.42.5(pid=12996): ERR: Terminated: ERROR {rc=1} [trial-2384↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12996)] 00:44:25.500710 run osmo-stp_10.42.42.5(pid=12996): stdout: | (launched: 2022-12-13_00:44:23.902691) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:44:25.641346 run osmo-stp_10.42.42.5(pid=12996): stderr: | �[0;m�[38;5;43m20221213004424092 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213004424092 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213004424092 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213004424093 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213004424093 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213004424093 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213004424093 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:44:25.777264 run osmo-stp_10.42.42.5(pid=12996): stdout: | (launched: 2022-12-13_00:44:23.902691) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:44:25.912075 run osmo-stp_10.42.42.5(pid=12996): stderr: | �[0;m�[38;5;43m20221213004424092 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213004424092 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213004424092 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213004424093 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213004424093 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213004424093 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213004424093 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:44:26.069340 run patchelf(pid=12999): Terminating (SIGINT) 00:44:26.254432 run patchelf(pid=12999): Terminated: ok {rc=0} 00:44:26.288443 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=12996): Process ended prematurely: osmo-stp_10.42.42.5(pid=12996) [trial-2384↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12996)] [trial-2384↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 00:44:26.298508 tst cs_paging_gprs_active.py:38: Test FAILED (9.0 sec) 00:44:26.363100 run osmo-hlr_10.42.42.2(pid=12993): ERR: Terminated: ERROR {rc=237} [trial-2384↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=12993)] 00:44:26.415439 run osmo-hlr_10.42.42.2(pid=12993): stdout: | (launched: 2022-12-13_00:44:22.876346) 00:44:26.468742 run osmo-hlr_10.42.42.2(pid=12993): stderr: | �[0;m�[1;31m20221213004423074 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213004423074 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213004423074 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213004423074 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213004423074 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213004423074 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213004423088 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2384/run.2022-12-13_00-09-58/gprs:trx-sysmocell5000+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213004423098 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213004423098 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213004423098 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 00:44:26.513922 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12986): Terminating (SIGTERM) 00:44:26.556201 run iperf3-srv_10.42.42.10(pid=12987): Terminating (SIGTERM) 00:44:26.598752 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12988): Terminating (SIGTERM) 00:44:26.641501 run iperf3-srv_10.42.42.10(pid=12989): Terminating (SIGTERM) 00:44:26.683745 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12992): Terminating (SIGTERM) 00:44:26.726387 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12995): Terminating (SIGTERM) 00:44:26.769257 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12998): Terminating (SIGTERM) 00:44:26.779100 --- ParallelTerminationStrategy: PID 12986 died... 00:44:26.835667 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12986): Terminated: ok {rc=0} 00:44:26.845903 --- ParallelTerminationStrategy: PID 12987 died... 00:44:26.901833 run iperf3-srv_10.42.42.10(pid=12987): Terminated {rc=256} 00:44:26.911954 --- ParallelTerminationStrategy: PID 12988 died... 00:44:26.968082 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12988): Terminated: ok {rc=0} 00:44:26.978485 --- ParallelTerminationStrategy: PID 12989 died... 00:44:27.034794 run iperf3-srv_10.42.42.10(pid=12989): Terminated {rc=256} 00:44:27.044685 --- ParallelTerminationStrategy: PID 12992 died... 00:44:27.100888 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12992): Terminated: ok {rc=0} 00:44:27.111418 --- ParallelTerminationStrategy: PID 12995 died... 00:44:27.168388 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12995): Terminated: ok {rc=0} 00:44:27.178605 --- ParallelTerminationStrategy: PID 12998 died... 00:44:27.234560 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12998): Terminated: ok {rc=0} 00:44:27.322541 bus /gobi_0: Setting Powered False 00:44:28.430351 bus /gobi_0: Setting Powered False 00:44:29.541349 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=12996): Process ended prematurely: osmo-stp_10.42.42.5(pid=12996) [trial-2384↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12996)]