Failed
gprs:trx-b200.iperf3.py (from gprs_trx-b200)
Stacktrace
osmo-stp_10.42.42.5(pid=28858): Process ended prematurely: osmo-stp_10.42.42.5(pid=28858) [trial-2387↪gprs:trx-b200↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28858)]
Standard Output
---------------------------------------------- trial-2387 gprs:trx-b200 iperf3.py ---------------------------------------------- 08:55:24.305744 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 08:55:24.317246 tst gprs:trx-b200: Using 1 x bts (candidates: 1) 08:55:24.456093 tst iperf3.py: using LAC 32851 08:55:24.574328 tst iperf3.py: using RAC 211 08:55:24.692631 tst iperf3.py: using CellId 32851 08:55:24.811000 tst iperf3.py: using BVCI 32852 08:55:24.833624 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 08:55:24.844122 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 08:55:24.854418 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 08:55:24.864539 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 08:55:24.875058 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 08:55:24.886328 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 08:55:24.897654 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 08:55:24.908151 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 08:55:24.918780 tst gprs:trx-b200: Using 1 x modem (candidates: 4) 08:55:25.193862 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 08:55:25.318230 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:55:25.625138 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28850): Launched 08:55:25.879517 run iperf3-srv_10.42.42.10(pid=28851): Launched 08:55:26.060551 tst iperf3.py:8: start network... 08:55:26.184479 run osmo-hlr_10.42.42.2: Starting osmo-hlr 08:55:26.648347 run create_hlr_db(pid=28852): Launched 08:55:26.819011 bus /gobi_6: Setting Powered False 08:55:27.840560 run create_hlr_db(pid=28852): Terminated: ok {rc=0} 08:55:28.258642 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28854): Launched 08:55:28.575364 run osmo-hlr_10.42.42.2(pid=28855): Launched 08:55:28.691842 run osmo-stp_10.42.42.5: Starting osmo-stp 08:55:29.243835 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28857): Launched 08:55:29.561767 run osmo-stp_10.42.42.5(pid=28858): Launched 08:55:29.677841 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 08:55:30.229919 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28860): Launched 08:55:30.343138 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 08:55:30.618437 run patchelf(pid=28861): Launched 08:55:30.804398 run osmo-stp_10.42.42.5(pid=28858): ERR: Terminated: ERROR {rc=1} [trial-2387↪gprs:trx-b200↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28858)] 08:55:30.952296 run osmo-stp_10.42.42.5(pid=28858): stdout: | (launched: 2022-12-13_08:55:29.405947) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:55:31.089926 run osmo-stp_10.42.42.5(pid=28858): stderr: | �[0;m�[38;5;43m20221213085529596 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213085529596 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213085529597 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213085529597 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213085529599 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213085529600 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213085529600 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:55:31.223591 run osmo-stp_10.42.42.5(pid=28858): stdout: | (launched: 2022-12-13_08:55:29.405947) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:55:31.356208 run osmo-stp_10.42.42.5(pid=28858): stderr: | �[0;m�[38;5;43m20221213085529596 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213085529596 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213085529597 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213085529597 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213085529599 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213085529600 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213085529600 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:55:31.510804 run patchelf(pid=28861): Terminating (SIGINT) 08:55:31.691761 run patchelf(pid=28861): Terminated: ok {rc=0} 08:55:31.725591 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=28858): Process ended prematurely: osmo-stp_10.42.42.5(pid=28858) [trial-2387↪gprs:trx-b200↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28858)] [trial-2387↪gprs:trx-b200↪iperf3.py:8] 08:55:31.736108 tst iperf3.py:8: Test FAILED (7.5 sec) 08:55:31.799957 run osmo-hlr_10.42.42.2(pid=28855): ERR: Terminated: ERROR {rc=237} [trial-2387↪gprs:trx-b200↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=28855)] 08:55:31.851834 run osmo-hlr_10.42.42.2(pid=28855): stdout: | (launched: 2022-12-13_08:55:28.420252) 08:55:31.904398 run osmo-hlr_10.42.42.2(pid=28855): stderr: | �[0;m�[1;31m20221213085528617 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213085528617 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213085528617 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213085528617 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213085528617 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213085528617 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213085528630 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2387/run.2022-12-13_08-32-52/gprs:trx-b200/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213085528638 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213085528638 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213085528638 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 08:55:31.949419 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28850): Terminating (SIGTERM) 08:55:31.993681 run iperf3-srv_10.42.42.10(pid=28851): Terminating (SIGTERM) 08:55:32.038061 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28854): Terminating (SIGTERM) 08:55:32.080035 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28857): Terminating (SIGTERM) 08:55:32.123235 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28860): Terminating (SIGTERM) 08:55:32.134252 --- ParallelTerminationStrategy: PID 28850 died... 08:55:32.190924 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28850): Terminated: ok {rc=0} 08:55:32.201368 --- ParallelTerminationStrategy: PID 28851 died... 08:55:32.257500 run iperf3-srv_10.42.42.10(pid=28851): Terminated {rc=256} 08:55:32.267909 --- ParallelTerminationStrategy: PID 28854 died... 08:55:32.323457 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28854): Terminated: ok {rc=0} 08:55:32.333456 --- ParallelTerminationStrategy: PID 28857 died... 08:55:32.388558 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28857): Terminated: ok {rc=0} 08:55:32.398614 --- ParallelTerminationStrategy: PID 28860 died... 08:55:32.453961 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28860): Terminated: ok {rc=0} 08:55:32.539649 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=28858): Process ended prematurely: osmo-stp_10.42.42.5(pid=28858) [trial-2387↪gprs:trx-b200↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28858)]