Failed
gprs:trx-b200.iperf3.py (from gprs_trx-b200)
Stacktrace
osmo-stp_10.42.42.5(pid=8914): Process ended prematurely: osmo-stp_10.42.42.5(pid=8914) [trial-2388↪gprs:trx-b200↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8914)]
Standard Output
---------------------------------------------- trial-2388 gprs:trx-b200 iperf3.py ---------------------------------------------- 10:27:52.928546 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 10:27:52.940486 tst gprs:trx-b200: Using 1 x bts (candidates: 1) 10:27:53.091803 tst iperf3.py: using LAC 33312 10:27:53.224146 tst iperf3.py: using RAC 162 10:27:53.356771 tst iperf3.py: using CellId 33312 10:27:53.489112 tst iperf3.py: using BVCI 33313 10:27:53.514670 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 10:27:53.526233 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 10:27:53.537284 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 10:27:53.548270 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 10:27:53.559513 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 10:27:53.570734 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 10:27:53.582615 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 10:27:53.593789 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 10:27:53.605305 tst gprs:trx-b200: Using 1 x modem (candidates: 4) 10:27:53.908279 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 10:27:54.048779 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:27:54.396620 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8906): Launched 10:27:54.685858 run iperf3-srv_10.42.42.10(pid=8907): Launched 10:27:54.890027 tst iperf3.py:8: start network... 10:27:55.029772 run osmo-hlr_10.42.42.2: Starting osmo-hlr 10:27:55.557777 run create_hlr_db(pid=8908): Launched 10:27:55.750786 bus /gobi_6: Setting Powered False 10:27:56.771716 run create_hlr_db(pid=8908): Terminated: ok {rc=0} 10:27:57.192939 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8910): Launched 10:27:57.508446 run osmo-hlr_10.42.42.2(pid=8911): Launched 10:27:57.623891 run osmo-stp_10.42.42.5: Starting osmo-stp 10:27:58.169254 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8913): Launched 10:27:58.484282 run osmo-stp_10.42.42.5(pid=8914): Launched 10:27:58.599201 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 10:27:59.145124 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8916): Launched 10:27:59.255934 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 10:27:59.529452 run patchelf(pid=8917): Launched 10:27:59.711237 run osmo-stp_10.42.42.5(pid=8914): ERR: Terminated: ERROR {rc=1} [trial-2388↪gprs:trx-b200↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8914)] 10:27:59.844223 run osmo-stp_10.42.42.5(pid=8914): stdout: | (launched: 2022-12-13_10:27:58.327955) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:27:59.977533 run osmo-stp_10.42.42.5(pid=8914): stderr: | �[0;m�[38;5;43m20221213102758499 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213102758499 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213102758499 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213102758500 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213102758500 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213102758500 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213102758501 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:28:00.105914 run osmo-stp_10.42.42.5(pid=8914): stdout: | (launched: 2022-12-13_10:27:58.327955) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:28:00.232932 run osmo-stp_10.42.42.5(pid=8914): stderr: | �[0;m�[38;5;43m20221213102758499 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213102758499 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213102758499 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213102758500 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213102758500 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213102758500 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213102758501 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:28:00.381757 run patchelf(pid=8917): Terminating (SIGINT) 10:28:00.557605 run patchelf(pid=8917): Terminated: ok {rc=0} 10:28:00.589898 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=8914): Process ended prematurely: osmo-stp_10.42.42.5(pid=8914) [trial-2388↪gprs:trx-b200↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8914)] [trial-2388↪gprs:trx-b200↪iperf3.py:8] 10:28:00.598980 tst iperf3.py:8: Test FAILED (7.7 sec) 10:28:00.659546 run osmo-hlr_10.42.42.2(pid=8911): ERR: Terminated: ERROR {rc=237} [trial-2388↪gprs:trx-b200↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=8911)] 10:28:00.708931 run osmo-hlr_10.42.42.2(pid=8911): stdout: | (launched: 2022-12-13_10:27:57.351317) 10:28:00.759354 run osmo-hlr_10.42.42.2(pid=8911): stderr: | �[0;m�[1;31m20221213102757530 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213102757530 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213102757530 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213102757530 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213102757530 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213102757530 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213102757542 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2388/run.2022-12-13_10-04-59/gprs:trx-b200/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213102757551 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213102757551 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213102757551 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 10:28:00.801765 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8906): Terminating (SIGTERM) 10:28:00.841707 run iperf3-srv_10.42.42.10(pid=8907): Terminating (SIGTERM) 10:28:00.884339 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8910): Terminating (SIGTERM) 10:28:00.926959 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8913): Terminating (SIGTERM) 10:28:00.975060 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8916): Terminating (SIGTERM) 10:28:00.984802 --- ParallelTerminationStrategy: PID 8906 died... 10:28:01.041006 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8906): Terminated: ok {rc=0} 10:28:01.051488 --- ParallelTerminationStrategy: PID 8907 died... 10:28:01.106738 run iperf3-srv_10.42.42.10(pid=8907): Terminated {rc=256} 10:28:01.116781 --- ParallelTerminationStrategy: PID 8910 died... 10:28:01.171068 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8910): Terminated: ok {rc=0} 10:28:01.181156 --- ParallelTerminationStrategy: PID 8913 died... 10:28:01.235547 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8913): Terminated: ok {rc=0} 10:28:01.245679 --- ParallelTerminationStrategy: PID 8916 died... 10:28:01.300268 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8916): Terminated: ok {rc=0} 10:28:01.386538 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=8914): Process ended prematurely: osmo-stp_10.42.42.5(pid=8914) [trial-2388↪gprs:trx-b200↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8914)]