Failed
gprs:trx-b200.ping.py (from gprs_trx-b200)
Stacktrace
osmo-stp_10.42.42.5(pid=16964): Process ended prematurely: osmo-stp_10.42.42.5(pid=16964) [trial-2389↪gprs:trx-b200↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16964)]
Standard Output
---------------------------------------------- trial-2389 gprs:trx-b200 ping.py ---------------------------------------------- 11:56:11.613170 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 11:56:11.625282 tst gprs:trx-b200: Using 1 x bts (candidates: 1) 11:56:11.771751 tst ping.py: using LAC 33775 11:56:11.892753 tst ping.py: using RAC 115 11:56:12.012531 tst ping.py: using CellId 33775 11:56:12.133071 tst ping.py: using BVCI 33776 11:56:12.156064 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 11:56:12.166869 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 11:56:12.177446 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 11:56:12.187904 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 11:56:12.198339 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 11:56:12.209340 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 11:56:12.220109 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 11:56:12.230864 tst gprs:trx-b200: Using 1 x modem (candidates: 4) 11:56:12.511924 tst ping.py:19: start network... 11:56:12.637238 run osmo-hlr_10.42.42.2: Starting osmo-hlr 11:56:13.117307 run create_hlr_db(pid=16958): Launched 11:56:13.289864 bus /gobi_6: Setting Powered False 11:56:14.311300 run create_hlr_db(pid=16958): Terminated: ok {rc=0} 11:56:14.712853 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16960): Launched 11:56:15.014250 run osmo-hlr_10.42.42.2(pid=16961): Launched 11:56:15.129268 run osmo-stp_10.42.42.5: Starting osmo-stp 11:56:15.653601 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16963): Launched 11:56:15.988454 run osmo-stp_10.42.42.5(pid=16964): Launched 11:56:16.164278 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 11:56:16.815003 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16966): Launched 11:56:16.925875 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 11:56:17.235150 run patchelf(pid=16967): Launched 11:56:17.433330 run osmo-stp_10.42.42.5(pid=16964): ERR: Terminated: ERROR {rc=1} [trial-2389↪gprs:trx-b200↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16964)] 11:56:17.561488 run osmo-stp_10.42.42.5(pid=16964): stdout: | (launched: 2022-12-13_11:56:15.806256) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:56:17.690005 run osmo-stp_10.42.42.5(pid=16964): stderr: | �[0;m�[38;5;43m20221213115616177 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213115616177 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213115616177 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213115616177 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213115616178 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213115616178 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213115616178 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:56:17.813954 run osmo-stp_10.42.42.5(pid=16964): stdout: | (launched: 2022-12-13_11:56:15.806256) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:56:17.936351 run osmo-stp_10.42.42.5(pid=16964): stderr: | �[0;m�[38;5;43m20221213115616177 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213115616177 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213115616177 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213115616177 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213115616178 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213115616178 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213115616178 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:56:18.079455 run patchelf(pid=16967): Terminating (SIGINT) 11:56:18.247977 run patchelf(pid=16967): Terminated: ok {rc=0} 11:56:18.278645 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=16964): Process ended prematurely: osmo-stp_10.42.42.5(pid=16964) [trial-2389↪gprs:trx-b200↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16964)] [trial-2389↪gprs:trx-b200↪ping.py:22] 11:56:18.287334 tst ping.py:22: Test FAILED (6.7 sec) 11:56:18.347486 run osmo-hlr_10.42.42.2(pid=16961): ERR: Terminated: ERROR {rc=237} [trial-2389↪gprs:trx-b200↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=16961)] 11:56:18.396326 run osmo-hlr_10.42.42.2(pid=16961): stdout: | (launched: 2022-12-13_11:56:14.864886) 11:56:18.445954 run osmo-hlr_10.42.42.2(pid=16961): stderr: | �[0;m�[1;31m20221213115615042 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213115615042 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213115615042 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213115615042 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213115615042 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213115615042 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213115615053 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2389/run.2022-12-13_11-32-52/gprs:trx-b200/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213115615062 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213115615062 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213115615062 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 11:56:18.488083 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16960): Terminating (SIGTERM) 11:56:18.527936 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16963): Terminating (SIGTERM) 11:56:18.567530 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16966): Terminating (SIGTERM) 11:56:18.576722 --- ParallelTerminationStrategy: PID 16960 died... 11:56:18.630061 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16960): Terminated: ok {rc=0} 11:56:18.639657 --- ParallelTerminationStrategy: PID 16963 died... 11:56:18.692785 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16963): Terminated: ok {rc=0} 11:56:18.702349 --- ParallelTerminationStrategy: PID 16966 died... 11:56:18.755270 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16966): Terminated: ok {rc=0} 11:56:18.844120 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=16964): Process ended prematurely: osmo-stp_10.42.42.5(pid=16964) [trial-2389↪gprs:trx-b200↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16964)]