Failed
gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend.cs_paging_gprs_active.py (from gprs_nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=22352): Process ended prematurely: osmo-stp_10.42.42.5(pid=22352) [trial-2389↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22352)]
Standard Output
---------------------------------------------- trial-2389 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py ---------------------------------------------- 12:46:05.870467 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 12:46:05.882110 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 12:46:06.022235 tst cs_paging_gprs_active.py: using LAC 34038 12:46:06.139471 tst cs_paging_gprs_active.py: using RAC 123 12:46:06.259050 tst cs_paging_gprs_active.py: using CellId 34038 12:46:06.376438 tst cs_paging_gprs_active.py: using BVCI 34039 12:46:06.399738 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 12:46:06.411134 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 12:46:06.422389 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 12:46:06.433580 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 12:46:06.444709 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 12:46:06.455830 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 12:46:06.467092 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 12:46:06.478117 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 12:46:06.489427 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 12:46:06.611504 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 12:46:06.906654 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 12:46:07.042555 run iperf3-srv_10.42.42.10: Starting iperf3-srv 12:46:07.380416 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22342): Launched 12:46:07.661746 run iperf3-srv_10.42.42.10(pid=22343): Launched 12:46:07.860928 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 12:46:07.996396 run iperf3-srv_10.42.42.10: Starting iperf3-srv 12:46:08.335360 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22344): Launched 12:46:08.615093 run iperf3-srv_10.42.42.10(pid=22345): Launched 12:46:08.815017 tst cs_paging_gprs_active.py:38: start network... 12:46:08.950344 run osmo-hlr_10.42.42.2: Starting osmo-hlr 12:46:09.465794 run create_hlr_db(pid=22346): Launched 12:46:09.655087 bus /gobi_6: Setting Powered False 12:46:10.675604 run create_hlr_db(pid=22346): Terminated: ok {rc=0} 12:46:11.085713 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22348): Launched 12:46:11.389701 run osmo-hlr_10.42.42.2(pid=22349): Launched 12:46:11.505536 run osmo-stp_10.42.42.5: Starting osmo-stp 12:46:12.032371 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22351): Launched 12:46:12.337598 run osmo-stp_10.42.42.5(pid=22352): Launched 12:46:12.447691 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 12:46:12.980202 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22354): Launched 12:46:13.087646 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 12:46:13.354539 run patchelf(pid=22355): Launched 12:46:13.532041 run osmo-stp_10.42.42.5(pid=22352): ERR: Terminated: ERROR {rc=1} [trial-2389↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22352)] 12:46:13.662247 run osmo-stp_10.42.42.5(pid=22352): stdout: | (launched: 2022-12-13_12:46:12.186340) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 12:46:13.792767 run osmo-stp_10.42.42.5(pid=22352): stderr: | �[0;m�[38;5;43m20221213124612354 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213124612355 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213124612355 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213124612355 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213124612356 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213124612356 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213124612356 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 12:46:13.918184 run osmo-stp_10.42.42.5(pid=22352): stdout: | (launched: 2022-12-13_12:46:12.186340) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 12:46:14.042010 run osmo-stp_10.42.42.5(pid=22352): stderr: | �[0;m�[38;5;43m20221213124612354 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213124612355 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213124612355 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213124612355 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213124612356 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213124612356 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213124612356 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 12:46:14.186960 run patchelf(pid=22355): Terminating (SIGINT) 12:46:14.356909 run patchelf(pid=22355): Terminated: ok {rc=0} 12:46:14.388274 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=22352): Process ended prematurely: osmo-stp_10.42.42.5(pid=22352) [trial-2389↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22352)] [trial-2389↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38] 12:46:14.397601 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 12:46:14.457963 run osmo-hlr_10.42.42.2(pid=22349): ERR: Terminated: ERROR {rc=237} [trial-2389↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=22349)] 12:46:14.506950 run osmo-hlr_10.42.42.2(pid=22349): stdout: | (launched: 2022-12-13_12:46:11.239275) 12:46:14.556662 run osmo-hlr_10.42.42.2(pid=22349): stderr: | �[0;m�[1;31m20221213124611416 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213124611416 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213124611416 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213124611416 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213124611416 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213124611416 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213124611429 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2389/run.2022-12-13_11-32-52/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213124611438 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213124611438 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213124611438 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 12:46:14.598854 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22342): Terminating (SIGTERM) 12:46:14.638553 run iperf3-srv_10.42.42.10(pid=22343): Terminating (SIGTERM) 12:46:14.678412 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22344): Terminating (SIGTERM) 12:46:14.718117 run iperf3-srv_10.42.42.10(pid=22345): Terminating (SIGTERM) 12:46:14.757911 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22348): Terminating (SIGTERM) 12:46:14.798012 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22351): Terminating (SIGTERM) 12:46:14.838131 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22354): Terminating (SIGTERM) 12:46:14.847242 --- ParallelTerminationStrategy: PID 22342 died... 12:46:14.900500 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22342): Terminated: ok {rc=0} 12:46:14.909956 --- ParallelTerminationStrategy: PID 22343 died... 12:46:14.962868 run iperf3-srv_10.42.42.10(pid=22343): Terminated {rc=256} 12:46:14.972383 --- ParallelTerminationStrategy: PID 22344 died... 12:46:15.025324 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22344): Terminated: ok {rc=0} 12:46:15.034812 --- ParallelTerminationStrategy: PID 22345 died... 12:46:15.087686 run iperf3-srv_10.42.42.10(pid=22345): Terminated {rc=256} 12:46:15.097201 --- ParallelTerminationStrategy: PID 22348 died... 12:46:15.150150 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22348): Terminated: ok {rc=0} 12:46:15.159567 --- ParallelTerminationStrategy: PID 22351 died... 12:46:15.212411 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22351): Terminated: ok {rc=0} 12:46:15.221951 --- ParallelTerminationStrategy: PID 22354 died... 12:46:15.274766 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22354): Terminated: ok {rc=0} 12:46:15.358745 bus /gobi_0: Setting Powered False 12:46:16.464767 bus /gobi_0: Setting Powered False 12:46:17.574444 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=22352): Process ended prematurely: osmo-stp_10.42.42.5(pid=22352) [trial-2389↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22352)]