Failed
dynts:oc2g+mod-bts0-dynts67-osmo.switch_tch_pdch.py (from dynts_oc2g+mod-bts0-dynts67-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=25450): Process ended prematurely: osmo-stp_10.42.42.5(pid=25450) [trial-2390↪dynts:oc2g+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25450)]
Standard Output
---------------------------------------------- trial-2390 dynts:oc2g+mod-bts0-dynts67-osmo switch_tch_pdch.py ---------------------------------------------- 13:19:09.106425 tst dynts:oc2g+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 13:19:09.117922 tst dynts:oc2g+mod-bts0-dynts67-osmo: Using 1 x bts (candidates: 1) 13:19:09.262856 tst switch_tch_pdch.py: using LAC 34208 13:19:09.379287 tst switch_tch_pdch.py: using RAC 38 13:19:09.496900 tst switch_tch_pdch.py: using CellId 34208 13:19:09.615001 tst switch_tch_pdch.py: using BVCI 34209 13:19:09.638048 tst dynts:oc2g+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 13:19:09.648868 tst dynts:oc2g+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 13:19:09.659563 tst dynts:oc2g+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 13:19:09.670214 tst dynts:oc2g+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 13:19:09.680727 tst dynts:oc2g+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 13:19:09.691320 tst dynts:oc2g+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 13:19:09.702260 tst dynts:oc2g+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 13:19:09.713359 tst dynts:oc2g+mod-bts0-dynts67-osmo: Using 1 x modem (candidates: 2) 13:19:09.830591 tst dynts:oc2g+mod-bts0-dynts67-osmo: Using 1 x modem (candidates: 2) 13:19:10.126109 tst switch_tch_pdch.py:51: start network... 13:19:10.259659 run osmo-hlr_10.42.42.2: Starting osmo-hlr 13:19:10.739044 run create_hlr_db(pid=25444): Launched 13:19:10.870117 bus /gobi_6: Setting Powered False 13:19:11.945812 run create_hlr_db(pid=25444): Terminated: ok {rc=0} 13:19:12.323131 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25446): Launched 13:19:12.622518 run osmo-hlr_10.42.42.2(pid=25447): Launched 13:19:12.731619 run osmo-stp_10.42.42.5: Starting osmo-stp 13:19:13.223908 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25449): Launched 13:19:13.523734 run osmo-stp_10.42.42.5(pid=25450): Launched 13:19:13.633046 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 13:19:14.129280 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25452): Launched 13:19:14.235232 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 13:19:14.495384 run patchelf(pid=25453): Launched 13:19:14.671180 run osmo-stp_10.42.42.5(pid=25450): ERR: Terminated: ERROR {rc=1} [trial-2390↪dynts:oc2g+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25450)] 13:19:14.798879 run osmo-stp_10.42.42.5(pid=25450): stdout: | (launched: 2022-12-13_13:19:13.374870) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:19:14.926922 run osmo-stp_10.42.42.5(pid=25450): stderr: | �[0;m�[38;5;43m20221213131913543 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213131913543 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213131913543 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213131913543 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213131913544 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213131913544 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213131913544 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:19:15.050097 run osmo-stp_10.42.42.5(pid=25450): stdout: | (launched: 2022-12-13_13:19:13.374870) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:19:15.172151 run osmo-stp_10.42.42.5(pid=25450): stderr: | �[0;m�[38;5;43m20221213131913543 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213131913543 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213131913543 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213131913543 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213131913544 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213131913544 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213131913544 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:19:15.315043 run patchelf(pid=25453): Terminating (SIGINT) 13:19:15.482301 run patchelf(pid=25453): Terminated: ok {rc=0} 13:19:15.512855 tst switch_tch_pdch.py:54: ERR: Error: osmo-stp_10.42.42.5(pid=25450): Process ended prematurely: osmo-stp_10.42.42.5(pid=25450) [trial-2390↪dynts:oc2g+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25450)] [trial-2390↪dynts:oc2g+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54] 13:19:15.521595 tst switch_tch_pdch.py:54: Test FAILED (6.4 sec) 13:19:15.580681 run osmo-hlr_10.42.42.2(pid=25447): ERR: Terminated: ERROR {rc=237} [trial-2390↪dynts:oc2g+mod-bts0-dynts67-osmo↪switch_tch_pdch.py↪switch_tch_pdch.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=25447)] 13:19:15.629178 run osmo-hlr_10.42.42.2(pid=25447): stdout: | (launched: 2022-12-13_13:19:12.474453) 13:19:15.678453 run osmo-hlr_10.42.42.2(pid=25447): stderr: | �[0;m�[1;31m20221213131912648 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213131912648 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213131912648 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213131912648 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213131912648 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213131912649 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213131912660 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2390/run.2022-12-13_13-01-08/dynts:oc2g+mod-bts0-dynts67-osmo/switch_tch_pdch.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213131912670 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213131912670 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213131912670 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 13:19:15.720938 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25446): Terminating (SIGTERM) 13:19:15.760934 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25449): Terminating (SIGTERM) 13:19:15.800783 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25452): Terminating (SIGTERM) 13:19:15.810010 --- ParallelTerminationStrategy: PID 25446 died... 13:19:15.864819 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25446): Terminated: ok {rc=0} 13:19:15.874763 --- ParallelTerminationStrategy: PID 25449 died... 13:19:15.933531 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25449): Terminated: ok {rc=0} 13:19:15.944037 --- ParallelTerminationStrategy: PID 25452 died... 13:19:15.998065 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25452): Terminated: ok {rc=0} 13:19:16.083735 bus /gobi_0: Setting Powered False 13:19:17.201075 bus /gobi_0: Setting Powered False 13:19:18.312232 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/dynts/switch_tch_pdch.py", line 54, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=25450): Process ended prematurely: osmo-stp_10.42.42.5(pid=25450) [trial-2390↪dynts:oc2g+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25450)]