Failed
gprs:nanobts+band-1900.cs_paging_gprs_active.py (from gprs_nanobts+band-1900)
Stacktrace
osmo-stp_10.42.42.5(pid=29485): Process ended prematurely: osmo-stp_10.42.42.5(pid=29485) [trial-2390↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29485)]
Standard Output
---------------------------------------------- trial-2390 gprs:nanobts+band-1900 cs_paging_gprs_active.py ---------------------------------------------- 14:04:45.600319 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 14:04:45.611129 tst gprs:nanobts+band-1900: Using 1 x bts (candidates: 1) 14:04:45.734438 tst cs_paging_gprs_active.py: using LAC 34451 14:04:45.854056 tst cs_paging_gprs_active.py: using RAC 26 14:04:45.992171 tst cs_paging_gprs_active.py: using CellId 34451 14:04:46.123185 tst cs_paging_gprs_active.py: using BVCI 34452 14:04:46.149142 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 14:04:46.161351 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 14:04:46.174523 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 14:04:46.186792 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 14:04:46.200224 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 14:04:46.212292 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 14:04:46.226043 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 14:04:46.238250 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 14:04:46.251221 tst gprs:nanobts+band-1900: Using 1 x modem (candidates: 4) 14:04:46.375758 tst gprs:nanobts+band-1900: Using 1 x modem (candidates: 4) 14:04:46.720658 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 14:04:46.892088 run iperf3-srv_10.42.42.10: Starting iperf3-srv 14:04:47.277543 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29475): Launched 14:04:47.558491 run iperf3-srv_10.42.42.10(pid=29476): Launched 14:04:47.756623 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 14:04:47.892083 run iperf3-srv_10.42.42.10: Starting iperf3-srv 14:04:48.230172 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29477): Launched 14:04:48.511150 run iperf3-srv_10.42.42.10(pid=29478): Launched 14:04:48.709605 tst cs_paging_gprs_active.py:38: start network... 14:04:48.844917 run osmo-hlr_10.42.42.2: Starting osmo-hlr 14:04:49.355286 run create_hlr_db(pid=29479): Launched 14:04:49.541930 bus /sierra_2: Setting Powered False 14:04:50.563058 run create_hlr_db(pid=29479): Terminated: ok {rc=0} 14:04:50.994630 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29481): Launched 14:04:51.319574 run osmo-hlr_10.42.42.2(pid=29482): Launched 14:04:51.437127 run osmo-stp_10.42.42.5: Starting osmo-stp 14:04:52.004877 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29484): Launched 14:04:52.331916 run osmo-stp_10.42.42.5(pid=29485): Launched 14:04:52.450007 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 14:04:53.017123 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29487): Launched 14:04:53.133749 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 14:04:53.417987 run patchelf(pid=29488): Launched 14:04:53.608457 run osmo-stp_10.42.42.5(pid=29485): ERR: Terminated: ERROR {rc=1} [trial-2390↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29485)] 14:04:53.747225 run osmo-stp_10.42.42.5(pid=29485): stdout: | (launched: 2022-12-13_14:04:52.169493) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 14:04:53.887002 run osmo-stp_10.42.42.5(pid=29485): stderr: | �[0;m�[38;5;43m20221213140452358 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213140452358 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213140452359 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213140452359 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213140452360 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213140452360 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213140452360 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 14:04:54.021940 run osmo-stp_10.42.42.5(pid=29485): stdout: | (launched: 2022-12-13_14:04:52.169493) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 14:04:54.155023 run osmo-stp_10.42.42.5(pid=29485): stderr: | �[0;m�[38;5;43m20221213140452358 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213140452358 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213140452359 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213140452359 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213140452360 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213140452360 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213140452360 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 14:04:54.310691 run patchelf(pid=29488): Terminating (SIGINT) 14:04:54.492778 run patchelf(pid=29488): Terminated: ok {rc=0} 14:04:54.526811 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=29485): Process ended prematurely: osmo-stp_10.42.42.5(pid=29485) [trial-2390↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29485)] [trial-2390↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38] 14:04:54.536775 tst cs_paging_gprs_active.py:38: Test FAILED (9.0 sec) 14:04:54.599892 run osmo-hlr_10.42.42.2(pid=29482): ERR: Terminated: ERROR {rc=237} [trial-2390↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=29482)] 14:04:54.651517 run osmo-hlr_10.42.42.2(pid=29482): stdout: | (launched: 2022-12-13_14:04:51.159345) 14:04:54.703676 run osmo-hlr_10.42.42.2(pid=29482): stderr: | �[0;m�[1;31m20221213140451353 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213140451353 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213140451353 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213140451353 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213140451354 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213140451354 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213140451371 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2390/run.2022-12-13_13-01-08/gprs:nanobts+band-1900/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213140451381 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213140451382 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213140451382 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 14:04:54.748264 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29475): Terminating (SIGTERM) 14:04:54.790294 run iperf3-srv_10.42.42.10(pid=29476): Terminating (SIGTERM) 14:04:54.832531 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29477): Terminating (SIGTERM) 14:04:54.874785 run iperf3-srv_10.42.42.10(pid=29478): Terminating (SIGTERM) 14:04:54.916982 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29481): Terminating (SIGTERM) 14:04:54.959040 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29484): Terminating (SIGTERM) 14:04:55.001293 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29487): Terminating (SIGTERM) 14:04:55.011002 --- ParallelTerminationStrategy: PID 29475 died... 14:04:55.067520 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29475): Terminated: ok {rc=0} 14:04:55.077792 --- ParallelTerminationStrategy: PID 29476 died... 14:04:55.133905 run iperf3-srv_10.42.42.10(pid=29476): Terminated {rc=256} 14:04:55.143960 --- ParallelTerminationStrategy: PID 29477 died... 14:04:55.199556 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29477): Terminated: ok {rc=0} 14:04:55.209797 --- ParallelTerminationStrategy: PID 29478 died... 14:04:55.265482 run iperf3-srv_10.42.42.10(pid=29478): Terminated {rc=256} 14:04:55.275477 --- ParallelTerminationStrategy: PID 29481 died... 14:04:55.331465 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29481): Terminated: ok {rc=0} 14:04:55.341965 --- ParallelTerminationStrategy: PID 29484 died... 14:04:55.398182 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29484): Terminated: ok {rc=0} 14:04:55.408236 --- ParallelTerminationStrategy: PID 29487 died... 14:04:55.464015 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29487): Terminated: ok {rc=0} 14:04:55.550172 bus /gobi_0: Setting Powered False 14:04:56.655928 bus /gobi_0: Setting Powered False 14:04:57.763501 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=29485): Process ended prematurely: osmo-stp_10.42.42.5(pid=29485) [trial-2390↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29485)]