Failed
gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend.iperf3m4.py (from gprs_nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=30438): Process ended prematurely: osmo-stp_10.42.42.5(pid=30438) [trial-2390↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30438)]
Standard Output
---------------------------------------------- trial-2390 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend iperf3m4.py ---------------------------------------------- 14:14:25.173866 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 14:14:25.186608 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 14:14:25.338346 tst iperf3m4.py: using LAC 34501 14:14:25.468769 tst iperf3m4.py: using RAC 76 14:14:25.597537 tst iperf3m4.py: using CellId 34501 14:14:25.727943 tst iperf3m4.py: using BVCI 34502 14:14:25.753169 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 14:14:25.764910 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 14:14:25.776775 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 14:14:25.788646 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 14:14:25.800662 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 14:14:25.812636 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 14:14:25.825102 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 14:14:25.837184 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 14:14:25.849706 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 14:14:25.972398 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 14:14:26.095930 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 14:14:26.218293 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 14:14:26.516840 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5003... 14:14:26.654690 run iperf3-srv_10.42.42.10: Starting iperf3-srv 14:14:26.997693 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30423): Launched 14:14:27.283981 run iperf3-srv_10.42.42.10(pid=30424): Launched 14:14:27.486052 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5004... 14:14:27.623620 run iperf3-srv_10.42.42.10: Starting iperf3-srv 14:14:27.965160 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30425): Launched 14:14:28.251741 run iperf3-srv_10.42.42.10(pid=30426): Launched 14:14:28.455069 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5005... 14:14:28.592868 run iperf3-srv_10.42.42.10: Starting iperf3-srv 14:14:28.936043 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30427): Launched 14:14:29.221424 run iperf3-srv_10.42.42.10(pid=30428): Launched 14:14:29.423719 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5006... 14:14:29.560708 run iperf3-srv_10.42.42.10: Starting iperf3-srv 14:14:29.901092 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30429): Launched 14:14:30.186304 run iperf3-srv_10.42.42.10(pid=30430): Launched 14:14:30.388137 tst iperf3m4.py:8: start network... 14:14:30.525199 run osmo-hlr_10.42.42.2: Starting osmo-hlr 14:14:31.102932 run create_hlr_db(pid=30432): Launched 14:14:31.300454 bus /gobi_6: Setting Powered False 14:14:32.314520 run create_hlr_db(pid=30432): Terminated: ok {rc=0} 14:14:32.757271 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30434): Launched 14:14:33.087604 run osmo-hlr_10.42.42.2(pid=30435): Launched 14:14:33.209340 run osmo-stp_10.42.42.5: Starting osmo-stp 14:14:33.785529 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30437): Launched 14:14:34.118144 run osmo-stp_10.42.42.5(pid=30438): Launched 14:14:34.237490 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 14:14:34.812896 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30440): Launched 14:14:34.930381 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 14:14:35.219524 run patchelf(pid=30441): Launched 14:14:35.411866 run osmo-stp_10.42.42.5(pid=30438): ERR: Terminated: ERROR {rc=1} [trial-2390↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30438)] 14:14:35.552192 run osmo-stp_10.42.42.5(pid=30438): stdout: | (launched: 2022-12-13_14:14:33.953030) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 14:14:35.693116 run osmo-stp_10.42.42.5(pid=30438): stderr: | �[0;m�[38;5;43m20221213141434146 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213141434146 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213141434146 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213141434147 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213141434147 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213141434147 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213141434147 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 14:14:35.828784 run osmo-stp_10.42.42.5(pid=30438): stdout: | (launched: 2022-12-13_14:14:33.953030) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 14:14:35.963599 run osmo-stp_10.42.42.5(pid=30438): stderr: | �[0;m�[38;5;43m20221213141434146 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213141434146 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213141434146 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213141434147 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213141434147 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213141434147 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213141434147 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 14:14:36.121201 run patchelf(pid=30441): Terminating (SIGINT) 14:14:36.306012 run patchelf(pid=30441): Terminated: ok {rc=0} 14:14:36.340247 tst iperf3m4.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=30438): Process ended prematurely: osmo-stp_10.42.42.5(pid=30438) [trial-2390↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30438)] [trial-2390↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8] 14:14:36.350469 tst iperf3m4.py:8: Test FAILED (11.2 sec) 14:14:36.414420 run osmo-hlr_10.42.42.2(pid=30435): ERR: Terminated: ERROR {rc=237} [trial-2390↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py↪iperf3m4.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=30435)] 14:14:36.466944 run osmo-hlr_10.42.42.2(pid=30435): stdout: | (launched: 2022-12-13_14:14:32.924482) 14:14:36.519473 run osmo-hlr_10.42.42.2(pid=30435): stderr: | �[0;m�[1;31m20221213141433125 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213141433125 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213141433125 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213141433125 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213141433125 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213141433125 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213141433139 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2390/run.2022-12-13_13-01-08/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/iperf3m4.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213141433147 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213141433148 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213141433148 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 14:14:36.564555 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30423): Terminating (SIGTERM) 14:14:36.607092 run iperf3-srv_10.42.42.10(pid=30424): Terminating (SIGTERM) 14:14:36.649566 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30425): Terminating (SIGTERM) 14:14:36.691980 run iperf3-srv_10.42.42.10(pid=30426): Terminating (SIGTERM) 14:14:36.734498 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30427): Terminating (SIGTERM) 14:14:36.776716 run iperf3-srv_10.42.42.10(pid=30428): Terminating (SIGTERM) 14:14:36.818899 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30429): Terminating (SIGTERM) 14:14:36.860894 run iperf3-srv_10.42.42.10(pid=30430): Terminating (SIGTERM) 14:14:36.903509 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30434): Terminating (SIGTERM) 14:14:36.945800 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30437): Terminating (SIGTERM) 14:14:36.988384 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30440): Terminating (SIGTERM) 14:14:36.998199 --- ParallelTerminationStrategy: PID 30423 died... 14:14:37.055154 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30423): Terminated: ok {rc=0} 14:14:37.065391 --- ParallelTerminationStrategy: PID 30424 died... 14:14:37.121709 run iperf3-srv_10.42.42.10(pid=30424): Terminated {rc=256} 14:14:37.131802 --- ParallelTerminationStrategy: PID 30425 died... 14:14:37.188477 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30425): Terminated: ok {rc=0} 14:14:37.198621 --- ParallelTerminationStrategy: PID 30426 died... 14:14:37.255226 run iperf3-srv_10.42.42.10(pid=30426): Terminated {rc=256} 14:14:37.265779 --- ParallelTerminationStrategy: PID 30427 died... 14:14:37.322195 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30427): Terminated: ok {rc=0} 14:14:37.332292 --- ParallelTerminationStrategy: PID 30428 died... 14:14:37.388719 run iperf3-srv_10.42.42.10(pid=30428): Terminated {rc=256} 14:14:37.398859 --- ParallelTerminationStrategy: PID 30429 died... 14:14:37.455044 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30429): Terminated: ok {rc=0} 14:14:37.465208 --- ParallelTerminationStrategy: PID 30430 died... 14:14:37.521703 run iperf3-srv_10.42.42.10(pid=30430): Terminated {rc=256} 14:14:37.531640 --- ParallelTerminationStrategy: PID 30434 died... 14:14:37.588274 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30434): Terminated: ok {rc=0} 14:14:37.598431 --- ParallelTerminationStrategy: PID 30437 died... 14:14:37.655052 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30437): Terminated: ok {rc=0} 14:14:37.665358 --- ParallelTerminationStrategy: PID 30440 died... 14:14:37.721798 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30440): Terminated: ok {rc=0} 14:14:37.809656 bus /gobi_4: Setting Powered False 14:14:38.916473 bus /gobi_4: Setting Powered False 14:14:40.025469 bus /gobi_1: Setting Powered False 14:14:41.133220 bus /gobi_1: Setting Powered False 14:14:42.241848 bus /gobi_0: Setting Powered False 14:14:43.350344 bus /gobi_0: Setting Powered False 14:14:44.464112 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3m4.py", line 8, in <module> setup_run_iperf3_test_parallel(4) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=30438): Process ended prematurely: osmo-stp_10.42.42.5(pid=30438) [trial-2390↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30438)]