Failed
gprs:nanobts+band-900.ping_idle_ping.py (from gprs_nanobts+band-900)
Stacktrace
osmo-stp_10.42.42.5(pid=30248): Process ended prematurely: osmo-stp_10.42.42.5(pid=30248) [trial-2390↪gprs:nanobts+band-900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30248)]
Standard Output
---------------------------------------------- trial-2390 gprs:nanobts+band-900 ping_idle_ping.py ---------------------------------------------- 14:11:52.554131 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 14:11:52.565987 tst gprs:nanobts+band-900: Using 1 x bts (candidates: 1) 14:11:52.713324 tst ping_idle_ping.py: using LAC 34488 14:11:52.840129 tst ping_idle_ping.py: using RAC 63 14:11:52.965933 tst ping_idle_ping.py: using CellId 34488 14:11:53.090740 tst ping_idle_ping.py: using BVCI 34489 14:11:53.115516 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 14:11:53.126807 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 14:11:53.137922 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 14:11:53.149566 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 14:11:53.161211 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 14:11:53.172874 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 14:11:53.185219 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 14:11:53.196818 tst gprs:nanobts+band-900: Using 1 x modem (candidates: 4) 14:11:53.475566 tst ping_idle_ping.py:24: start network... 14:11:53.600941 run osmo-hlr_10.42.42.2: Starting osmo-hlr 14:11:54.094525 run create_hlr_db(pid=30242): Launched 14:11:54.284613 bus /gobi_6: Setting Powered False 14:11:55.304628 run create_hlr_db(pid=30242): Terminated: ok {rc=0} 14:11:55.714644 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30244): Launched 14:11:56.018756 run osmo-hlr_10.42.42.2(pid=30245): Launched 14:11:56.134370 run osmo-stp_10.42.42.5: Starting osmo-stp 14:11:56.673814 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30247): Launched 14:11:56.979451 run osmo-stp_10.42.42.5(pid=30248): Launched 14:11:57.088442 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 14:11:57.621900 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30250): Launched 14:11:57.729482 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 14:11:57.997371 run patchelf(pid=30251): Launched 14:11:58.175398 run osmo-stp_10.42.42.5(pid=30248): ERR: Terminated: ERROR {rc=1} [trial-2390↪gprs:nanobts+band-900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30248)] 14:11:58.305826 run osmo-stp_10.42.42.5(pid=30248): stdout: | (launched: 2022-12-13_14:11:56.827677) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 14:11:58.436698 run osmo-stp_10.42.42.5(pid=30248): stderr: | �[0;m�[38;5;43m20221213141157000 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213141157000 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213141157000 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213141157001 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213141157001 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213141157001 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213141157001 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 14:11:58.562657 run osmo-stp_10.42.42.5(pid=30248): stdout: | (launched: 2022-12-13_14:11:56.827677) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 14:11:58.686979 run osmo-stp_10.42.42.5(pid=30248): stderr: | �[0;m�[38;5;43m20221213141157000 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213141157000 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213141157000 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213141157001 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213141157001 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213141157001 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213141157001 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 14:11:58.832750 run patchelf(pid=30251): Terminating (SIGINT) 14:11:59.004582 run patchelf(pid=30251): Terminated: ok {rc=0} 14:11:59.035617 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=30248): Process ended prematurely: osmo-stp_10.42.42.5(pid=30248) [trial-2390↪gprs:nanobts+band-900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30248)] [trial-2390↪gprs:nanobts+band-900↪ping_idle_ping.py:27] 14:11:59.044282 tst ping_idle_ping.py:27: Test FAILED (6.5 sec) 14:11:59.104082 run osmo-hlr_10.42.42.2(pid=30245): ERR: Terminated: ERROR {rc=237} [trial-2390↪gprs:nanobts+band-900↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=30245)] 14:11:59.152605 run osmo-hlr_10.42.42.2(pid=30245): stdout: | (launched: 2022-12-13_14:11:55.867748) 14:11:59.202340 run osmo-hlr_10.42.42.2(pid=30245): stderr: | �[0;m�[1;31m20221213141156044 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213141156044 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213141156045 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213141156045 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213141156045 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213141156045 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213141156058 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2390/run.2022-12-13_13-01-08/gprs:nanobts+band-900/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213141156067 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213141156067 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213141156067 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 14:11:59.244485 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30244): Terminating (SIGTERM) 14:11:59.284467 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30247): Terminating (SIGTERM) 14:11:59.324438 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30250): Terminating (SIGTERM) 14:11:59.333953 --- ParallelTerminationStrategy: PID 30244 died... 14:11:59.387799 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30244): Terminated: ok {rc=0} 14:11:59.397687 --- ParallelTerminationStrategy: PID 30247 died... 14:11:59.450810 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30247): Terminated: ok {rc=0} 14:11:59.460578 --- ParallelTerminationStrategy: PID 30250 died... 14:11:59.513656 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30250): Terminated: ok {rc=0} 14:11:59.601215 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=30248): Process ended prematurely: osmo-stp_10.42.42.5(pid=30248) [trial-2390↪gprs:nanobts+band-900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30248)]