Failed
gprs:oc2g+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=25304): Process ended prematurely: osmo-stp_10.42.42.5(pid=25304) [trial-2390↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25304)]
Standard Output
---------------------------------------------- trial-2390 gprs:oc2g+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 13:16:57.167157 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:16:57.178183 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 13:16:57.321596 tst cs_paging_gprs_active.py: using LAC 34197 13:16:57.441699 tst cs_paging_gprs_active.py: using RAC 27 13:16:57.561385 tst cs_paging_gprs_active.py: using CellId 34197 13:16:57.680657 tst cs_paging_gprs_active.py: using BVCI 34198 13:16:57.704257 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:16:57.715121 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:16:57.725782 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:16:57.736340 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:16:57.746997 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:16:57.758162 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:16:57.768898 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:16:57.779597 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:16:57.790506 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 13:16:57.911647 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 13:16:58.193490 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 13:16:58.321214 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:16:58.639418 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25291): Launched 13:16:58.905448 run iperf3-srv_10.42.42.10(pid=25292): Launched 13:16:59.091898 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 13:16:59.218871 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:16:59.537702 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25293): Launched 13:16:59.802628 run iperf3-srv_10.42.42.10(pid=25294): Launched 13:16:59.989545 tst cs_paging_gprs_active.py:38: start network... 13:17:00.117094 run osmo-hlr_10.42.42.2: Starting osmo-hlr 13:17:00.608616 run create_hlr_db(pid=25295): Launched 13:17:00.783345 bus /gobi_6: Setting Powered False 13:17:01.827729 run create_hlr_db(pid=25295): Terminated: ok {rc=0} 13:17:02.299190 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25300): Launched 13:17:02.629462 run osmo-hlr_10.42.42.2(pid=25301): Launched 13:17:02.752003 run osmo-stp_10.42.42.5: Starting osmo-stp 13:17:03.321733 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25303): Launched 13:17:03.651779 run osmo-stp_10.42.42.5(pid=25304): Launched 13:17:03.771275 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 13:17:04.341404 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25306): Launched 13:17:04.458795 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 13:17:04.745609 run patchelf(pid=25307): Launched 13:17:04.936580 run osmo-stp_10.42.42.5(pid=25304): ERR: Terminated: ERROR {rc=1} [trial-2390↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25304)] 13:17:05.075936 run osmo-stp_10.42.42.5(pid=25304): stdout: | (launched: 2022-12-13_13:17:03.487753) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:17:05.216070 run osmo-stp_10.42.42.5(pid=25304): stderr: | �[0;m�[38;5;43m20221213131703681 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213131703681 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213131703681 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213131703682 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213131703682 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213131703682 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213131703682 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:17:05.351330 run osmo-stp_10.42.42.5(pid=25304): stdout: | (launched: 2022-12-13_13:17:03.487753) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:17:05.485587 run osmo-stp_10.42.42.5(pid=25304): stderr: | �[0;m�[38;5;43m20221213131703681 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213131703681 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213131703681 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213131703682 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213131703682 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213131703682 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213131703682 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:17:05.643327 run patchelf(pid=25307): Terminating (SIGINT) 13:17:05.827151 run patchelf(pid=25307): Terminated: ok {rc=0} 13:17:05.860819 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=25304): Process ended prematurely: osmo-stp_10.42.42.5(pid=25304) [trial-2390↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25304)] [trial-2390↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 13:17:05.870859 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 13:17:05.934668 run osmo-hlr_10.42.42.2(pid=25301): ERR: Terminated: ERROR {rc=237} [trial-2390↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=25301)] 13:17:05.986456 run osmo-hlr_10.42.42.2(pid=25301): stdout: | (launched: 2022-12-13_13:17:02.465729) 13:17:06.039117 run osmo-hlr_10.42.42.2(pid=25301): stderr: | �[0;m�[1;31m20221213131702662 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213131702662 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213131702662 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213131702662 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213131702663 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213131702663 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213131702675 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2390/run.2022-12-13_13-01-08/gprs:oc2g+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213131702684 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213131702684 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213131702684 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 13:17:06.084219 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25291): Terminating (SIGTERM) 13:17:06.126838 run iperf3-srv_10.42.42.10(pid=25292): Terminating (SIGTERM) 13:17:06.169454 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25293): Terminating (SIGTERM) 13:17:06.211896 run iperf3-srv_10.42.42.10(pid=25294): Terminating (SIGTERM) 13:17:06.254665 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25300): Terminating (SIGTERM) 13:17:06.297058 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25303): Terminating (SIGTERM) 13:17:06.339809 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25306): Terminating (SIGTERM) 13:17:06.349590 --- ParallelTerminationStrategy: PID 25291 died... 13:17:06.406554 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25291): Terminated: ok {rc=0} 13:17:06.416638 --- ParallelTerminationStrategy: PID 25292 died... 13:17:06.473103 run iperf3-srv_10.42.42.10(pid=25292): Terminated {rc=256} 13:17:06.483122 --- ParallelTerminationStrategy: PID 25293 died... 13:17:06.539962 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25293): Terminated: ok {rc=0} 13:17:06.550138 --- ParallelTerminationStrategy: PID 25294 died... 13:17:06.606617 run iperf3-srv_10.42.42.10(pid=25294): Terminated {rc=256} 13:17:06.616490 --- ParallelTerminationStrategy: PID 25300 died... 13:17:06.673289 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25300): Terminated: ok {rc=0} 13:17:06.683383 --- ParallelTerminationStrategy: PID 25303 died... 13:17:06.739512 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25303): Terminated: ok {rc=0} 13:17:06.749644 --- ParallelTerminationStrategy: PID 25306 died... 13:17:06.805649 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25306): Terminated: ok {rc=0} 13:17:06.892822 bus /gobi_0: Setting Powered False 13:17:07.995365 bus /gobi_0: Setting Powered False 13:17:09.101587 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=25304): Process ended prematurely: osmo-stp_10.42.42.5(pid=25304) [trial-2390↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25304)]