Failed
gprs:sysmo+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=24748): Process ended prematurely: osmo-stp_10.42.42.5(pid=24748) [trial-2390↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24748)]
Standard Output
---------------------------------------------- trial-2390 gprs:sysmo+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 13:09:04.258527 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:09:04.271305 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 13:09:04.433474 tst cs_paging_gprs_active.py: using LAC 34155 13:09:04.570608 tst cs_paging_gprs_active.py: using RAC 240 13:09:04.706285 tst cs_paging_gprs_active.py: using CellId 34155 13:09:04.840005 tst cs_paging_gprs_active.py: using BVCI 34156 13:09:04.868421 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:09:04.880864 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:09:04.893541 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:09:04.905815 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:09:04.919075 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:09:04.932745 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:09:04.946744 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:09:04.959902 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:09:04.973972 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 13:09:05.105640 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 13:09:05.421468 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 13:09:05.568626 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:09:05.940595 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24738): Launched 13:09:06.257096 run iperf3-srv_10.42.42.10(pid=24739): Launched 13:09:06.471433 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 13:09:06.616850 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:09:06.989829 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24740): Launched 13:09:07.304660 run iperf3-srv_10.42.42.10(pid=24741): Launched 13:09:07.517311 tst cs_paging_gprs_active.py:38: start network... 13:09:07.663817 run osmo-hlr_10.42.42.2: Starting osmo-hlr 13:09:08.249712 run create_hlr_db(pid=24742): Launched 13:09:08.450724 bus /gobi_6: Setting Powered False 13:09:09.468006 run create_hlr_db(pid=24742): Terminated: ok {rc=0} 13:09:09.900674 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24744): Launched 13:09:10.215917 run osmo-hlr_10.42.42.2(pid=24745): Launched 13:09:10.335093 run osmo-stp_10.42.42.5: Starting osmo-stp 13:09:10.880202 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24747): Launched 13:09:11.197406 run osmo-stp_10.42.42.5(pid=24748): Launched 13:09:11.312291 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 13:09:11.863128 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24750): Launched 13:09:11.975356 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 13:09:12.250925 run patchelf(pid=24751): Launched 13:09:12.433987 run osmo-stp_10.42.42.5(pid=24748): ERR: Terminated: ERROR {rc=1} [trial-2390↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24748)] 13:09:12.567399 run osmo-stp_10.42.42.5(pid=24748): stdout: | (launched: 2022-12-13_13:09:11.039038) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:09:12.700887 run osmo-stp_10.42.42.5(pid=24748): stderr: | �[0;m�[38;5;43m20221213130911212 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213130911213 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213130911213 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213130911213 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213130911214 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213130911214 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213130911214 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:09:12.829761 run osmo-stp_10.42.42.5(pid=24748): stdout: | (launched: 2022-12-13_13:09:11.039038) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:09:12.957323 run osmo-stp_10.42.42.5(pid=24748): stderr: | �[0;m�[38;5;43m20221213130911212 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213130911213 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213130911213 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213130911213 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213130911214 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213130911214 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213130911214 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:09:13.106866 run patchelf(pid=24751): Terminating (SIGINT) 13:09:13.282659 run patchelf(pid=24751): Terminated: ok {rc=0} 13:09:13.314985 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=24748): Process ended prematurely: osmo-stp_10.42.42.5(pid=24748) [trial-2390↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24748)] [trial-2390↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 13:09:13.324265 tst cs_paging_gprs_active.py:38: Test FAILED (9.1 sec) 13:09:13.384099 run osmo-hlr_10.42.42.2(pid=24745): ERR: Terminated: ERROR {rc=237} [trial-2390↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=24745)] 13:09:13.432823 run osmo-hlr_10.42.42.2(pid=24745): stdout: | (launched: 2022-12-13_13:09:10.060539) 13:09:13.482328 run osmo-hlr_10.42.42.2(pid=24745): stderr: | �[0;m�[1;31m20221213130910241 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213130910241 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213130910242 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213130910242 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213130910242 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213130910242 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213130910255 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2390/run.2022-12-13_13-01-08/gprs:sysmo+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213130910264 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213130910265 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213130910265 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 13:09:13.524596 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24738): Terminating (SIGTERM) 13:09:13.564214 run iperf3-srv_10.42.42.10(pid=24739): Terminating (SIGTERM) 13:09:13.604020 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24740): Terminating (SIGTERM) 13:09:13.643826 run iperf3-srv_10.42.42.10(pid=24741): Terminating (SIGTERM) 13:09:13.683745 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24744): Terminating (SIGTERM) 13:09:13.723473 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24747): Terminating (SIGTERM) 13:09:13.763772 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24750): Terminating (SIGTERM) 13:09:13.773005 --- ParallelTerminationStrategy: PID 24738 died... 13:09:13.826250 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24738): Terminated: ok {rc=0} 13:09:13.835737 --- ParallelTerminationStrategy: PID 24739 died... 13:09:13.888523 run iperf3-srv_10.42.42.10(pid=24739): Terminated {rc=256} 13:09:13.898058 --- ParallelTerminationStrategy: PID 24740 died... 13:09:13.950759 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24740): Terminated: ok {rc=0} 13:09:13.960135 --- ParallelTerminationStrategy: PID 24741 died... 13:09:14.012922 run iperf3-srv_10.42.42.10(pid=24741): Terminated {rc=256} 13:09:14.022536 --- ParallelTerminationStrategy: PID 24744 died... 13:09:14.075413 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24744): Terminated: ok {rc=0} 13:09:14.084882 --- ParallelTerminationStrategy: PID 24747 died... 13:09:14.137789 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24747): Terminated: ok {rc=0} 13:09:14.147285 --- ParallelTerminationStrategy: PID 24750 died... 13:09:14.200001 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24750): Terminated: ok {rc=0} 13:09:14.288740 bus /gobi_0: Setting Powered False 13:09:15.392458 bus /gobi_0: Setting Powered False 13:09:16.503472 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=24748): Process ended prematurely: osmo-stp_10.42.42.5(pid=24748) [trial-2390↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24748)]