Failed
gprs:sysmo+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=24408): Process ended prematurely: osmo-stp_10.42.42.5(pid=24408) [trial-2390↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24408)]
Standard Output
---------------------------------------------- trial-2390 gprs:sysmo+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 13:08:01.685630 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:08:01.697033 tst gprs:sysmo+mod-bts0-egprs: Using 1 x bts (candidates: 1) 13:08:01.833573 tst cs_paging_gprs_active.py: using LAC 34150 13:08:01.962692 tst cs_paging_gprs_active.py: using RAC 235 13:08:02.098843 tst cs_paging_gprs_active.py: using CellId 34150 13:08:02.245992 tst cs_paging_gprs_active.py: using BVCI 34151 13:08:02.271214 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:08:02.282978 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:08:02.294808 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:08:02.306482 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:08:02.317527 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:08:02.328462 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:08:02.339841 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:08:02.351584 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:08:02.363000 tst gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4) 13:08:02.483914 tst gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4) 13:08:02.773025 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 13:08:02.904156 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:08:03.231356 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24398): Launched 13:08:03.502729 run iperf3-srv_10.42.42.10(pid=24399): Launched 13:08:03.693573 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 13:08:03.823981 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:08:04.149902 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24400): Launched 13:08:04.420327 run iperf3-srv_10.42.42.10(pid=24401): Launched 13:08:04.610816 tst cs_paging_gprs_active.py:38: start network... 13:08:04.740744 run osmo-hlr_10.42.42.2: Starting osmo-hlr 13:08:05.245254 run create_hlr_db(pid=24402): Launched 13:08:05.424575 bus /gobi_6: Setting Powered False 13:08:06.446241 run create_hlr_db(pid=24402): Terminated: ok {rc=0} 13:08:06.890553 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24404): Launched 13:08:07.226833 run osmo-hlr_10.42.42.2(pid=24405): Launched 13:08:07.350600 run osmo-stp_10.42.42.5: Starting osmo-stp 13:08:07.931643 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24407): Launched 13:08:08.267644 run osmo-stp_10.42.42.5(pid=24408): Launched 13:08:08.389402 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 13:08:08.971350 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24410): Launched 13:08:09.090754 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 13:08:09.383859 run patchelf(pid=24411): Launched 13:08:09.578614 run osmo-stp_10.42.42.5(pid=24408): ERR: Terminated: ERROR {rc=1} [trial-2390↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24408)] 13:08:09.720644 run osmo-stp_10.42.42.5(pid=24408): stdout: | (launched: 2022-12-13_13:08:08.101503) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:08:09.863303 run osmo-stp_10.42.42.5(pid=24408): stderr: | �[0;m�[38;5;43m20221213130808298 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213130808298 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213130808298 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213130808298 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213130808299 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213130808299 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213130808299 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:08:10.001204 run osmo-stp_10.42.42.5(pid=24408): stdout: | (launched: 2022-12-13_13:08:08.101503) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:08:10.137978 run osmo-stp_10.42.42.5(pid=24408): stderr: | �[0;m�[38;5;43m20221213130808298 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213130808298 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213130808298 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213130808298 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213130808299 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213130808299 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213130808299 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:08:10.297602 run patchelf(pid=24411): Terminating (SIGINT) 13:08:10.484507 run patchelf(pid=24411): Terminated: ok {rc=0} 13:08:10.518796 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=24408): Process ended prematurely: osmo-stp_10.42.42.5(pid=24408) [trial-2390↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24408)] [trial-2390↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 13:08:10.528885 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 13:08:10.592510 run osmo-hlr_10.42.42.2(pid=24405): ERR: Terminated: ERROR {rc=237} [trial-2390↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=24405)] 13:08:10.644444 run osmo-hlr_10.42.42.2(pid=24405): stdout: | (launched: 2022-12-13_13:08:07.060738) 13:08:10.696940 run osmo-hlr_10.42.42.2(pid=24405): stderr: | �[0;m�[1;31m20221213130807263 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213130807263 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213130807263 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213130807263 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213130807263 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213130807263 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213130807275 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2390/run.2022-12-13_13-01-08/gprs:sysmo+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213130807284 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213130807284 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213130807284 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 13:08:10.742241 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24398): Terminating (SIGTERM) 13:08:10.784829 run iperf3-srv_10.42.42.10(pid=24399): Terminating (SIGTERM) 13:08:10.827602 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24400): Terminating (SIGTERM) 13:08:10.870030 run iperf3-srv_10.42.42.10(pid=24401): Terminating (SIGTERM) 13:08:10.912412 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24404): Terminating (SIGTERM) 13:08:10.955035 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24407): Terminating (SIGTERM) 13:08:10.997487 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24410): Terminating (SIGTERM) 13:08:11.007215 --- ParallelTerminationStrategy: PID 24398 died... 13:08:11.064087 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24398): Terminated: ok {rc=0} 13:08:11.074228 --- ParallelTerminationStrategy: PID 24399 died... 13:08:11.130454 run iperf3-srv_10.42.42.10(pid=24399): Terminated {rc=256} 13:08:11.140521 --- ParallelTerminationStrategy: PID 24400 died... 13:08:11.197410 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24400): Terminated: ok {rc=0} 13:08:11.207423 --- ParallelTerminationStrategy: PID 24401 died... 13:08:11.264178 run iperf3-srv_10.42.42.10(pid=24401): Terminated {rc=256} 13:08:11.274405 --- ParallelTerminationStrategy: PID 24404 died... 13:08:11.330927 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24404): Terminated: ok {rc=0} 13:08:11.341134 --- ParallelTerminationStrategy: PID 24407 died... 13:08:11.397923 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24407): Terminated: ok {rc=0} 13:08:11.408048 --- ParallelTerminationStrategy: PID 24410 died... 13:08:11.465090 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24410): Terminated: ok {rc=0} 13:08:11.553941 bus /gobi_0: Setting Powered False 13:08:12.658680 bus /gobi_0: Setting Powered False 13:08:13.766178 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=24408): Process ended prematurely: osmo-stp_10.42.42.5(pid=24408) [trial-2390↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24408)]