Failed
gprs:trx-umtrx+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=27752): Process ended prematurely: osmo-stp_10.42.42.5(pid=27752) [trial-2390↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27752)]
Standard Output
---------------------------------------------- trial-2390 gprs:trx-umtrx+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 13:43:52.704566 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:43:52.715464 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 13:43:52.872150 tst cs_paging_gprs_active.py: using LAC 34339 13:43:53.002722 tst cs_paging_gprs_active.py: using RAC 169 13:43:53.131178 tst cs_paging_gprs_active.py: using CellId 34339 13:43:53.258581 tst cs_paging_gprs_active.py: using BVCI 34340 13:43:53.283841 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:43:53.295458 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:43:53.306885 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:43:53.318426 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:43:53.330158 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:43:53.342183 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:43:53.353916 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:43:53.365541 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:43:53.377421 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 13:43:53.496361 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 13:43:53.798026 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 13:43:53.935314 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:43:54.275812 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27742): Launched 13:43:54.557939 run iperf3-srv_10.42.42.10(pid=27743): Launched 13:43:54.758544 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 13:43:54.895200 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:43:55.236302 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27744): Launched 13:43:55.519370 run iperf3-srv_10.42.42.10(pid=27745): Launched 13:43:55.719061 tst cs_paging_gprs_active.py:38: start network... 13:43:55.855442 run osmo-hlr_10.42.42.2: Starting osmo-hlr 13:43:56.369452 run create_hlr_db(pid=27746): Launched 13:43:56.558085 bus /gobi_6: Setting Powered False 13:43:57.579759 run create_hlr_db(pid=27746): Terminated: ok {rc=0} 13:43:57.990323 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27748): Launched 13:43:58.298168 run osmo-hlr_10.42.42.2(pid=27749): Launched 13:43:58.411164 run osmo-stp_10.42.42.5: Starting osmo-stp 13:43:58.941516 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27751): Launched 13:43:59.246266 run osmo-stp_10.42.42.5(pid=27752): Launched 13:43:59.357908 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 13:43:59.888795 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27754): Launched 13:43:59.996756 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 13:44:00.264381 run patchelf(pid=27755): Launched 13:44:00.443123 run osmo-stp_10.42.42.5(pid=27752): ERR: Terminated: ERROR {rc=1} [trial-2390↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27752)] 13:44:00.573212 run osmo-stp_10.42.42.5(pid=27752): stdout: | (launched: 2022-12-13_13:43:59.095713) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:44:00.703128 run osmo-stp_10.42.42.5(pid=27752): stderr: | �[0;m�[38;5;43m20221213134359262 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213134359262 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213134359263 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213134359263 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213134359263 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213134359264 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213134359264 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:44:00.829738 run osmo-stp_10.42.42.5(pid=27752): stdout: | (launched: 2022-12-13_13:43:59.095713) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:44:00.975530 run osmo-stp_10.42.42.5(pid=27752): stderr: | �[0;m�[38;5;43m20221213134359262 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213134359262 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213134359263 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213134359263 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213134359263 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213134359264 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213134359264 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:44:01.130151 run patchelf(pid=27755): Terminating (SIGINT) 13:44:01.307158 run patchelf(pid=27755): Terminated: ok {rc=0} 13:44:01.339977 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=27752): Process ended prematurely: osmo-stp_10.42.42.5(pid=27752) [trial-2390↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27752)] [trial-2390↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 13:44:01.350651 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 13:44:01.411300 run osmo-hlr_10.42.42.2(pid=27749): ERR: Terminated: ERROR {rc=237} [trial-2390↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=27749)] 13:44:01.461587 run osmo-hlr_10.42.42.2(pid=27749): stdout: | (launched: 2022-12-13_13:43:58.145662) 13:44:01.511874 run osmo-hlr_10.42.42.2(pid=27749): stderr: | �[0;m�[1;31m20221213134358320 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213134358320 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213134358320 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213134358320 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213134358320 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213134358320 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213134358333 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2390/run.2022-12-13_13-01-08/gprs:trx-umtrx+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213134358342 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213134358343 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213134358343 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 13:44:01.555022 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27742): Terminating (SIGTERM) 13:44:01.597923 run iperf3-srv_10.42.42.10(pid=27743): Terminating (SIGTERM) 13:44:01.640692 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27744): Terminating (SIGTERM) 13:44:01.682188 run iperf3-srv_10.42.42.10(pid=27745): Terminating (SIGTERM) 13:44:01.726096 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27748): Terminating (SIGTERM) 13:44:01.766015 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27751): Terminating (SIGTERM) 13:44:01.805945 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27754): Terminating (SIGTERM) 13:44:01.814948 --- ParallelTerminationStrategy: PID 27742 died... 13:44:01.868285 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27742): Terminated: ok {rc=0} 13:44:01.878151 --- ParallelTerminationStrategy: PID 27743 died... 13:44:01.931421 run iperf3-srv_10.42.42.10(pid=27743): Terminated {rc=256} 13:44:01.941678 --- ParallelTerminationStrategy: PID 27744 died... 13:44:01.995151 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27744): Terminated: ok {rc=0} 13:44:02.005358 --- ParallelTerminationStrategy: PID 27745 died... 13:44:02.058465 run iperf3-srv_10.42.42.10(pid=27745): Terminated {rc=256} 13:44:02.068204 --- ParallelTerminationStrategy: PID 27748 died... 13:44:02.121312 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27748): Terminated: ok {rc=0} 13:44:02.131082 --- ParallelTerminationStrategy: PID 27751 died... 13:44:02.183753 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27751): Terminated: ok {rc=0} 13:44:02.193523 --- ParallelTerminationStrategy: PID 27754 died... 13:44:02.246216 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27754): Terminated: ok {rc=0} 13:44:02.333154 bus /gobi_0: Setting Powered False 13:44:03.438454 bus /gobi_0: Setting Powered False 13:44:04.549447 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=27752): Process ended prematurely: osmo-stp_10.42.42.5(pid=27752) [trial-2390↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27752)]