Failed
gprs:oc2g+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=2464): Process ended prematurely: osmo-stp_10.42.42.5(pid=2464) [trial-2391↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2464)]
Standard Output
---------------------------------------------- trial-2391 gprs:oc2g+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 15:53:57.731283 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 15:53:57.743255 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 15:53:57.902824 tst cs_paging_gprs_active.py: using LAC 34658 15:53:58.028115 tst cs_paging_gprs_active.py: using RAC 233 15:53:58.153017 tst cs_paging_gprs_active.py: using CellId 34658 15:53:58.277416 tst cs_paging_gprs_active.py: using BVCI 34659 15:53:58.303553 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 15:53:58.316206 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 15:53:58.328054 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 15:53:58.340635 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 15:53:58.352820 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 15:53:58.365201 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 15:53:58.377288 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 15:53:58.389088 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 15:53:58.401079 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 15:53:58.523280 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 15:53:58.819174 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 15:53:58.955464 run iperf3-srv_10.42.42.10: Starting iperf3-srv 15:53:59.308856 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2454): Launched 15:53:59.609639 run iperf3-srv_10.42.42.10(pid=2455): Launched 15:53:59.808571 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 15:53:59.944278 run iperf3-srv_10.42.42.10: Starting iperf3-srv 15:54:00.296204 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2456): Launched 15:54:00.594081 run iperf3-srv_10.42.42.10(pid=2457): Launched 15:54:00.792405 tst cs_paging_gprs_active.py:38: start network... 15:54:00.943231 run osmo-hlr_10.42.42.2: Starting osmo-hlr 15:54:01.589965 run create_hlr_db(pid=2458): Launched 15:54:01.813919 bus /gobi_6: Setting Powered False 15:54:02.865490 run create_hlr_db(pid=2458): Terminated: ok {rc=0} 15:54:03.331933 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2460): Launched 15:54:03.780305 run osmo-hlr_10.42.42.2(pid=2461): Launched 15:54:04.010578 run osmo-stp_10.42.42.5: Starting osmo-stp 15:54:04.623279 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2463): Launched 15:54:05.053074 run osmo-stp_10.42.42.5(pid=2464): Launched 15:54:05.297476 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 15:54:05.908203 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2466): Launched 15:54:06.023399 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 15:54:06.323551 run patchelf(pid=2467): Launched 15:54:06.514866 run osmo-stp_10.42.42.5(pid=2464): ERR: Terminated: ERROR {rc=1} [trial-2391↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2464)] 15:54:06.652243 run osmo-stp_10.42.42.5(pid=2464): stdout: | (launched: 2022-12-13_15:54:04.787771) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 15:54:06.791762 run osmo-stp_10.42.42.5(pid=2464): stderr: | �[0;m�[38;5;43m20221213155405119 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213155405119 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213155405119 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213155405120 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213155405120 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213155405120 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213155405120 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 15:54:06.925264 run osmo-stp_10.42.42.5(pid=2464): stdout: | (launched: 2022-12-13_15:54:04.787771) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 15:54:07.056405 run osmo-stp_10.42.42.5(pid=2464): stderr: | �[0;m�[38;5;43m20221213155405119 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213155405119 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213155405119 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213155405120 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213155405120 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213155405120 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213155405120 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 15:54:07.211015 run patchelf(pid=2467): Terminating (SIGINT) 15:54:07.396680 run patchelf(pid=2467): Terminated: ok {rc=0} 15:54:07.430719 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=2464): Process ended prematurely: osmo-stp_10.42.42.5(pid=2464) [trial-2391↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2464)] [trial-2391↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 15:54:07.441206 tst cs_paging_gprs_active.py:38: Test FAILED (9.7 sec) 15:54:07.505830 run osmo-hlr_10.42.42.2(pid=2461): ERR: Terminated: ERROR {rc=237} [trial-2391↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=2461)] 15:54:07.557343 run osmo-hlr_10.42.42.2(pid=2461): stdout: | (launched: 2022-12-13_15:54:03.505948) 15:54:07.610034 run osmo-hlr_10.42.42.2(pid=2461): stderr: | �[0;m�[1;31m20221213155403815 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213155403815 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213155403815 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213155403815 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213155403815 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213155403815 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213155403834 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2391/run.2022-12-13_15-37-59/gprs:oc2g+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213155403846 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213155403846 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213155403847 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 15:54:07.654127 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2454): Terminating (SIGTERM) 15:54:07.699875 run iperf3-srv_10.42.42.10(pid=2455): Terminating (SIGTERM) 15:54:07.744233 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2456): Terminating (SIGTERM) 15:54:07.788425 run iperf3-srv_10.42.42.10(pid=2457): Terminating (SIGTERM) 15:54:07.832406 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2460): Terminating (SIGTERM) 15:54:07.874531 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2463): Terminating (SIGTERM) 15:54:07.919416 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2466): Terminating (SIGTERM) 15:54:07.930189 --- ParallelTerminationStrategy: PID 2454 died... 15:54:07.988794 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2454): Terminated: ok {rc=0} 15:54:07.999856 --- ParallelTerminationStrategy: PID 2455 died... 15:54:08.056109 run iperf3-srv_10.42.42.10(pid=2455): Terminated {rc=256} 15:54:08.066565 --- ParallelTerminationStrategy: PID 2456 died... 15:54:08.123930 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2456): Terminated: ok {rc=0} 15:54:08.134605 --- ParallelTerminationStrategy: PID 2457 died... 15:54:08.190033 run iperf3-srv_10.42.42.10(pid=2457): Terminated {rc=256} 15:54:08.200626 --- ParallelTerminationStrategy: PID 2460 died... 15:54:08.256664 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2460): Terminated: ok {rc=0} 15:54:08.267176 --- ParallelTerminationStrategy: PID 2463 died... 15:54:08.323579 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2463): Terminated: ok {rc=0} 15:54:08.333808 --- ParallelTerminationStrategy: PID 2466 died... 15:54:08.390140 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2466): Terminated: ok {rc=0} 15:54:08.477319 bus /gobi_0: Setting Powered False 15:54:09.583428 bus /gobi_0: Setting Powered False 15:54:10.696173 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=2464): Process ended prematurely: osmo-stp_10.42.42.5(pid=2464) [trial-2391↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2464)]