Failed
gprs:oc2g+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=10538): Process ended prematurely: osmo-stp_10.42.42.5(pid=10538) [trial-2392↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10538)]
Standard Output
---------------------------------------------- trial-2392 gprs:oc2g+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 17:26:03.624895 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 17:26:03.636178 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 17:26:03.789927 tst cs_paging_gprs_active.py: using LAC 35119 17:26:03.920461 tst cs_paging_gprs_active.py: using RAC 184 17:26:04.051588 tst cs_paging_gprs_active.py: using CellId 35119 17:26:04.182994 tst cs_paging_gprs_active.py: using BVCI 35120 17:26:04.208258 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 17:26:04.219567 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 17:26:04.230743 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 17:26:04.242245 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 17:26:04.253574 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 17:26:04.264809 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 17:26:04.276298 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 17:26:04.287723 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 17:26:04.299329 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 17:26:04.419888 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 17:26:04.721054 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 17:26:04.858681 run iperf3-srv_10.42.42.10: Starting iperf3-srv 17:26:05.200545 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10527): Launched 17:26:05.486277 run iperf3-srv_10.42.42.10(pid=10528): Launched 17:26:05.689752 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 17:26:05.828294 run iperf3-srv_10.42.42.10: Starting iperf3-srv 17:26:06.171969 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10529): Launched 17:26:06.455918 run iperf3-srv_10.42.42.10(pid=10530): Launched 17:26:06.658670 tst cs_paging_gprs_active.py:38: start network... 17:26:06.796449 run osmo-hlr_10.42.42.2: Starting osmo-hlr 17:26:07.315820 run create_hlr_db(pid=10531): Launched 17:26:07.507490 bus /gobi_6: Setting Powered False 17:26:08.528778 run create_hlr_db(pid=10531): Terminated: ok {rc=0} 17:26:08.944631 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10533): Launched 17:26:09.253163 run osmo-hlr_10.42.42.2(pid=10534): Launched 17:26:09.367225 run osmo-stp_10.42.42.5: Starting osmo-stp 17:26:09.903336 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10536): Launched 17:26:10.212649 run osmo-stp_10.42.42.5(pid=10538): Launched 17:26:10.325781 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 17:26:10.865241 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10540): Launched 17:26:10.975206 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 17:26:11.245266 run patchelf(pid=10541): Launched 17:26:11.426993 run osmo-stp_10.42.42.5(pid=10538): ERR: Terminated: ERROR {rc=1} [trial-2392↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10538)] 17:26:11.559752 run osmo-stp_10.42.42.5(pid=10538): stdout: | (launched: 2022-12-13_17:26:10.060343) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 17:26:11.692471 run osmo-stp_10.42.42.5(pid=10538): stderr: | �[0;m�[38;5;43m20221213172610231 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213172610231 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213172610231 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213172610232 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213172610232 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213172610232 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213172610233 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 17:26:11.820252 run osmo-stp_10.42.42.5(pid=10538): stdout: | (launched: 2022-12-13_17:26:10.060343) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 17:26:11.946519 run osmo-stp_10.42.42.5(pid=10538): stderr: | �[0;m�[38;5;43m20221213172610231 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213172610231 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213172610231 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213172610232 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213172610232 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213172610232 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213172610233 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 17:26:12.095173 run patchelf(pid=10541): Terminating (SIGINT) 17:26:12.271898 run patchelf(pid=10541): Terminated: ok {rc=0} 17:26:12.303865 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=10538): Process ended prematurely: osmo-stp_10.42.42.5(pid=10538) [trial-2392↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10538)] [trial-2392↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 17:26:12.313160 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 17:26:12.373586 run osmo-hlr_10.42.42.2(pid=10534): ERR: Terminated: ERROR {rc=237} [trial-2392↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=10534)] 17:26:12.423050 run osmo-hlr_10.42.42.2(pid=10534): stdout: | (launched: 2022-12-13_17:26:09.102257) 17:26:12.473431 run osmo-hlr_10.42.42.2(pid=10534): stderr: | �[0;m�[1;31m20221213172609276 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213172609276 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213172609276 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213172609276 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213172609276 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213172609276 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213172609289 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2392/run.2022-12-13_17-10-08/gprs:oc2g+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213172609297 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213172609297 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213172609297 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 17:26:12.515916 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10527): Terminating (SIGTERM) 17:26:12.555983 run iperf3-srv_10.42.42.10(pid=10528): Terminating (SIGTERM) 17:26:12.596194 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10529): Terminating (SIGTERM) 17:26:12.636128 run iperf3-srv_10.42.42.10(pid=10530): Terminating (SIGTERM) 17:26:12.676130 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10533): Terminating (SIGTERM) 17:26:12.716030 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10536): Terminating (SIGTERM) 17:26:12.755902 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10540): Terminating (SIGTERM) 17:26:12.765120 --- ParallelTerminationStrategy: PID 10527 died... 17:26:12.818617 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10527): Terminated: ok {rc=0} 17:26:12.828130 --- ParallelTerminationStrategy: PID 10528 died... 17:26:12.881043 run iperf3-srv_10.42.42.10(pid=10528): Terminated {rc=256} 17:26:12.890454 --- ParallelTerminationStrategy: PID 10529 died... 17:26:12.943497 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10529): Terminated: ok {rc=0} 17:26:12.953081 --- ParallelTerminationStrategy: PID 10530 died... 17:26:13.006047 run iperf3-srv_10.42.42.10(pid=10530): Terminated {rc=256} 17:26:13.015448 --- ParallelTerminationStrategy: PID 10533 died... 17:26:13.068648 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10533): Terminated: ok {rc=0} 17:26:13.078167 --- ParallelTerminationStrategy: PID 10536 died... 17:26:13.131348 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10536): Terminated: ok {rc=0} 17:26:13.140882 --- ParallelTerminationStrategy: PID 10540 died... 17:26:13.194061 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10540): Terminated: ok {rc=0} 17:26:13.282531 bus /gobi_0: Setting Powered False 17:26:14.390515 bus /gobi_0: Setting Powered False 17:26:15.504436 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=10538): Process ended prematurely: osmo-stp_10.42.42.5(pid=10538) [trial-2392↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10538)]