Failed
gprs:oc2g+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=10606): Process ended prematurely: osmo-stp_10.42.42.5(pid=10606) [trial-2392↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10606)]
Standard Output
---------------------------------------------- trial-2392 gprs:oc2g+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 17:27:03.893880 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 17:27:03.904509 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 17:27:04.050272 tst cs_paging_gprs_active.py: using LAC 35124 17:27:04.171013 tst cs_paging_gprs_active.py: using RAC 189 17:27:04.296113 tst cs_paging_gprs_active.py: using CellId 35124 17:27:04.418813 tst cs_paging_gprs_active.py: using BVCI 35125 17:27:04.442491 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 17:27:04.453314 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 17:27:04.463833 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 17:27:04.474390 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 17:27:04.484783 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 17:27:04.495319 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 17:27:04.505961 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 17:27:04.516809 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 17:27:04.528325 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 17:27:04.652462 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 17:27:04.950732 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 17:27:05.088375 run iperf3-srv_10.42.42.10: Starting iperf3-srv 17:27:05.431128 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10596): Launched 17:27:05.716379 run iperf3-srv_10.42.42.10(pid=10597): Launched 17:27:05.919592 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 17:27:06.057726 run iperf3-srv_10.42.42.10: Starting iperf3-srv 17:27:06.399908 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10598): Launched 17:27:06.683876 run iperf3-srv_10.42.42.10(pid=10599): Launched 17:27:06.886732 tst cs_paging_gprs_active.py:38: start network... 17:27:07.025371 run osmo-hlr_10.42.42.2: Starting osmo-hlr 17:27:07.544763 run create_hlr_db(pid=10600): Launched 17:27:07.736189 bus /gobi_6: Setting Powered False 17:27:08.757704 run create_hlr_db(pid=10600): Terminated: ok {rc=0} 17:27:09.174767 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10602): Launched 17:27:09.484119 run osmo-hlr_10.42.42.2(pid=10603): Launched 17:27:09.598368 run osmo-stp_10.42.42.5: Starting osmo-stp 17:27:10.135991 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10605): Launched 17:27:10.447392 run osmo-stp_10.42.42.5(pid=10606): Launched 17:27:10.559649 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 17:27:11.100787 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10608): Launched 17:27:11.211095 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 17:27:11.481291 run patchelf(pid=10609): Launched 17:27:11.663107 run osmo-stp_10.42.42.5(pid=10606): ERR: Terminated: ERROR {rc=1} [trial-2392↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10606)] 17:27:11.795927 run osmo-stp_10.42.42.5(pid=10606): stdout: | (launched: 2022-12-13_17:27:10.293983) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 17:27:11.929357 run osmo-stp_10.42.42.5(pid=10606): stderr: | �[0;m�[38;5;43m20221213172710462 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213172710462 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213172710462 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213172710463 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213172710463 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213172710463 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213172710463 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 17:27:12.057416 run osmo-stp_10.42.42.5(pid=10606): stdout: | (launched: 2022-12-13_17:27:10.293983) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 17:27:12.184126 run osmo-stp_10.42.42.5(pid=10606): stderr: | �[0;m�[38;5;43m20221213172710462 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213172710462 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213172710462 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213172710463 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213172710463 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213172710463 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213172710463 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 17:27:12.332916 run patchelf(pid=10609): Terminating (SIGINT) 17:27:12.509144 run patchelf(pid=10609): Terminated: ok {rc=0} 17:27:12.541219 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=10606): Process ended prematurely: osmo-stp_10.42.42.5(pid=10606) [trial-2392↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10606)] [trial-2392↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 17:27:12.550497 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 17:27:12.610989 run osmo-hlr_10.42.42.2(pid=10603): ERR: Terminated: ERROR {rc=237} [trial-2392↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=10603)] 17:27:12.660258 run osmo-hlr_10.42.42.2(pid=10603): stdout: | (launched: 2022-12-13_17:27:09.331931) 17:27:12.710365 run osmo-hlr_10.42.42.2(pid=10603): stderr: | �[0;m�[1;31m20221213172709507 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213172709507 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213172709507 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213172709507 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213172709507 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213172709507 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213172709519 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2392/run.2022-12-13_17-10-08/gprs:oc2g+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213172709527 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213172709528 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213172709528 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 17:27:12.752794 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10596): Terminating (SIGTERM) 17:27:12.792631 run iperf3-srv_10.42.42.10(pid=10597): Terminating (SIGTERM) 17:27:12.832460 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10598): Terminating (SIGTERM) 17:27:12.872228 run iperf3-srv_10.42.42.10(pid=10599): Terminating (SIGTERM) 17:27:12.912130 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10602): Terminating (SIGTERM) 17:27:12.952139 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10605): Terminating (SIGTERM) 17:27:12.992230 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10608): Terminating (SIGTERM) 17:27:13.001433 --- ParallelTerminationStrategy: PID 10596 died... 17:27:13.055105 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10596): Terminated: ok {rc=0} 17:27:13.064580 --- ParallelTerminationStrategy: PID 10597 died... 17:27:13.117767 run iperf3-srv_10.42.42.10(pid=10597): Terminated {rc=256} 17:27:13.127224 --- ParallelTerminationStrategy: PID 10598 died... 17:27:13.180213 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10598): Terminated: ok {rc=0} 17:27:13.189708 --- ParallelTerminationStrategy: PID 10599 died... 17:27:13.242781 run iperf3-srv_10.42.42.10(pid=10599): Terminated {rc=256} 17:27:13.252204 --- ParallelTerminationStrategy: PID 10602 died... 17:27:13.305385 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10602): Terminated: ok {rc=0} 17:27:13.314869 --- ParallelTerminationStrategy: PID 10605 died... 17:27:13.368166 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10605): Terminated: ok {rc=0} 17:27:13.377822 --- ParallelTerminationStrategy: PID 10608 died... 17:27:13.431107 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10608): Terminated: ok {rc=0} 17:27:13.521049 bus /gobi_0: Setting Powered False 17:27:14.627248 bus /gobi_0: Setting Powered False 17:27:15.735299 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=10606): Process ended prematurely: osmo-stp_10.42.42.5(pid=10606) [trial-2392↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10606)]