Failed
gprs:sysmo+mod-bts0-dynts-ipa.ping_idle_ping.py (from gprs_sysmo+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=9760): Process ended prematurely: osmo-stp_10.42.42.5(pid=9760) [trial-2392↪gprs:sysmo+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9760)]
Standard Output
---------------------------------------------- trial-2392 gprs:sysmo+mod-bts0-dynts-ipa ping_idle_ping.py ---------------------------------------------- 17:18:52.705816 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 17:18:52.717823 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 17:18:52.871745 tst ping_idle_ping.py: using LAC 35081 17:18:53.006354 tst ping_idle_ping.py: using RAC 146 17:18:53.133533 tst ping_idle_ping.py: using CellId 35081 17:18:53.260157 tst ping_idle_ping.py: using BVCI 35082 17:18:53.285120 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 17:18:53.296407 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 17:18:53.307457 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 17:18:53.318636 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 17:18:53.330629 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 17:18:53.342359 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 17:18:53.354416 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 17:18:53.366474 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 17:18:53.665386 tst ping_idle_ping.py:24: start network... 17:18:53.803444 run osmo-hlr_10.42.42.2: Starting osmo-hlr 17:18:54.323139 run create_hlr_db(pid=9754): Launched 17:18:54.514046 bus /gobi_6: Setting Powered False 17:18:55.535845 run create_hlr_db(pid=9754): Terminated: ok {rc=0} 17:18:55.952186 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9756): Launched 17:18:56.263427 run osmo-hlr_10.42.42.2(pid=9757): Launched 17:18:56.377940 run osmo-stp_10.42.42.5: Starting osmo-stp 17:18:56.915349 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9759): Launched 17:18:57.225187 run osmo-stp_10.42.42.5(pid=9760): Launched 17:18:57.338530 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 17:18:57.877887 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9762): Launched 17:18:57.987204 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 17:18:58.257191 run patchelf(pid=9763): Launched 17:18:58.436389 run osmo-stp_10.42.42.5(pid=9760): ERR: Terminated: ERROR {rc=1} [trial-2392↪gprs:sysmo+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9760)] 17:18:58.567327 run osmo-stp_10.42.42.5(pid=9760): stdout: | (launched: 2022-12-13_17:18:57.071564) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 17:18:58.699328 run osmo-stp_10.42.42.5(pid=9760): stderr: | �[0;m�[38;5;43m20221213171857245 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213171857245 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213171857245 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213171857246 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213171857246 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213171857246 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213171857246 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 17:18:58.825944 run osmo-stp_10.42.42.5(pid=9760): stdout: | (launched: 2022-12-13_17:18:57.071564) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 17:18:58.951076 run osmo-stp_10.42.42.5(pid=9760): stderr: | �[0;m�[38;5;43m20221213171857245 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213171857245 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213171857245 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213171857246 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213171857246 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213171857246 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213171857246 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 17:18:59.098236 run patchelf(pid=9763): Terminating (SIGINT) 17:18:59.271808 run patchelf(pid=9763): Terminated: ok {rc=0} 17:18:59.303151 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=9760): Process ended prematurely: osmo-stp_10.42.42.5(pid=9760) [trial-2392↪gprs:sysmo+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9760)] [trial-2392↪gprs:sysmo+mod-bts0-dynts-ipa↪ping_idle_ping.py:27] 17:18:59.311767 tst ping_idle_ping.py:27: Test FAILED (6.6 sec) 17:18:59.372452 run osmo-hlr_10.42.42.2(pid=9757): ERR: Terminated: ERROR {rc=237} [trial-2392↪gprs:sysmo+mod-bts0-dynts-ipa↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=9757)] 17:18:59.421680 run osmo-hlr_10.42.42.2(pid=9757): stdout: | (launched: 2022-12-13_17:18:56.108774) 17:18:59.471507 run osmo-hlr_10.42.42.2(pid=9757): stderr: | �[0;m�[1;31m20221213171856289 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213171856289 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213171856289 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213171856289 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213171856289 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213171856289 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213171856301 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2392/run.2022-12-13_17-10-08/gprs:sysmo+mod-bts0-dynts-ipa/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213171856310 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213171856310 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213171856310 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 17:18:59.513972 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9756): Terminating (SIGTERM) 17:18:59.554219 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9759): Terminating (SIGTERM) 17:18:59.594363 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9762): Terminating (SIGTERM) 17:18:59.603228 --- ParallelTerminationStrategy: PID 9756 died... 17:18:59.656702 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9756): Terminated: ok {rc=0} 17:18:59.666343 --- ParallelTerminationStrategy: PID 9759 died... 17:18:59.719749 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9759): Terminated: ok {rc=0} 17:18:59.729800 --- ParallelTerminationStrategy: PID 9762 died... 17:18:59.783504 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9762): Terminated: ok {rc=0} 17:18:59.868566 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=9760): Process ended prematurely: osmo-stp_10.42.42.5(pid=9760) [trial-2392↪gprs:sysmo+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9760)]