Failed
gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend.iperf3m4.py (from gprs_nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=16735): Process ended prematurely: osmo-stp_10.42.42.5(pid=16735) [trial-2392↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16735)]
Standard Output
---------------------------------------------- trial-2392 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend iperf3m4.py ---------------------------------------------- 18:23:56.780325 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 18:23:56.794073 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 18:23:56.948256 tst iperf3m4.py: using LAC 35423 18:23:57.080493 tst iperf3m4.py: using RAC 233 18:23:57.215251 tst iperf3m4.py: using CellId 35423 18:23:57.347461 tst iperf3m4.py: using BVCI 35424 18:23:57.375029 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 18:23:57.388001 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 18:23:57.400836 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 18:23:57.413667 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 18:23:57.427579 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 18:23:57.442389 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 18:23:57.456635 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 18:23:57.470533 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 18:23:57.485486 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 18:23:57.619063 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 18:23:57.750366 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 18:23:57.881517 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 18:23:58.195590 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5003... 18:23:58.338087 run iperf3-srv_10.42.42.10: Starting iperf3-srv 18:23:58.705224 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16721): Launched 18:23:59.015716 run iperf3-srv_10.42.42.10(pid=16722): Launched 18:23:59.225454 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5004... 18:23:59.369332 run iperf3-srv_10.42.42.10: Starting iperf3-srv 18:23:59.732796 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16723): Launched 18:24:00.043534 run iperf3-srv_10.42.42.10(pid=16724): Launched 18:24:00.252733 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5005... 18:24:00.397056 run iperf3-srv_10.42.42.10: Starting iperf3-srv 18:24:00.765197 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16725): Launched 18:24:01.090456 run iperf3-srv_10.42.42.10(pid=16726): Launched 18:24:01.300824 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5006... 18:24:01.516791 run iperf3-srv_10.42.42.10: Starting iperf3-srv 18:24:01.957177 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16727): Launched 18:24:02.368735 run iperf3-srv_10.42.42.10(pid=16728): Launched 18:24:02.640707 tst iperf3m4.py:8: start network... 18:24:02.779283 run osmo-hlr_10.42.42.2: Starting osmo-hlr 18:24:03.371642 run create_hlr_db(pid=16729): Launched 18:24:03.610905 bus /gobi_6: Setting Powered False 18:24:04.598022 run create_hlr_db(pid=16729): Terminated: ok {rc=0} 18:24:05.101898 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16731): Launched 18:24:05.543960 run osmo-hlr_10.42.42.2(pid=16732): Launched 18:24:05.792606 run osmo-stp_10.42.42.5: Starting osmo-stp 18:24:06.396942 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16734): Launched 18:24:06.845216 run osmo-stp_10.42.42.5(pid=16735): Launched 18:24:07.064870 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 18:24:07.726393 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16737): Launched 18:24:07.852259 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 18:24:08.165050 run patchelf(pid=16738): Launched 18:24:08.367343 run osmo-stp_10.42.42.5(pid=16735): ERR: Terminated: ERROR {rc=1} [trial-2392↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16735)] 18:24:08.514850 run osmo-stp_10.42.42.5(pid=16735): stdout: | (launched: 2022-12-13_18:24:06.571606) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:24:08.664297 run osmo-stp_10.42.42.5(pid=16735): stderr: | �[0;m�[38;5;43m20221213182406869 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213182406870 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213182406870 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213182406870 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213182406871 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213182406871 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213182406871 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:24:08.808646 run osmo-stp_10.42.42.5(pid=16735): stdout: | (launched: 2022-12-13_18:24:06.571606) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:24:08.952372 run osmo-stp_10.42.42.5(pid=16735): stderr: | �[0;m�[38;5;43m20221213182406869 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213182406870 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213182406870 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213182406870 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213182406871 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213182406871 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213182406871 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:24:09.118296 run patchelf(pid=16738): Terminating (SIGINT) 18:24:09.314428 run patchelf(pid=16738): Terminated: ok {rc=0} 18:24:09.352174 tst iperf3m4.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=16735): Process ended prematurely: osmo-stp_10.42.42.5(pid=16735) [trial-2392↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16735)] [trial-2392↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8] 18:24:09.363905 tst iperf3m4.py:8: Test FAILED (12.6 sec) 18:24:09.432579 run osmo-hlr_10.42.42.2(pid=16732): ERR: Terminated: ERROR {rc=237} [trial-2392↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py↪iperf3m4.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=16732)] 18:24:09.488182 run osmo-hlr_10.42.42.2(pid=16732): stdout: | (launched: 2022-12-13_18:24:05.276520) 18:24:09.545088 run osmo-hlr_10.42.42.2(pid=16732): stderr: | �[0;m�[1;31m20221213182405586 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213182405586 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213182405586 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213182405586 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213182405586 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213182405586 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213182405602 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2392/run.2022-12-13_17-10-08/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/iperf3m4.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213182405611 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213182405611 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213182405611 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 18:24:09.595252 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16721): Terminating (SIGTERM) 18:24:09.642999 run iperf3-srv_10.42.42.10(pid=16722): Terminating (SIGTERM) 18:24:09.690877 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16723): Terminating (SIGTERM) 18:24:09.738486 run iperf3-srv_10.42.42.10(pid=16724): Terminating (SIGTERM) 18:24:09.788633 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16725): Terminating (SIGTERM) 18:24:09.836122 run iperf3-srv_10.42.42.10(pid=16726): Terminating (SIGTERM) 18:24:09.884425 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16727): Terminating (SIGTERM) 18:24:09.931557 run iperf3-srv_10.42.42.10(pid=16728): Terminating (SIGTERM) 18:24:09.979972 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16731): Terminating (SIGTERM) 18:24:10.027725 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16734): Terminating (SIGTERM) 18:24:10.075638 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16737): Terminating (SIGTERM) 18:24:10.086784 --- ParallelTerminationStrategy: PID 16721 died... 18:24:10.150048 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16721): Terminated: ok {rc=0} 18:24:10.163193 --- ParallelTerminationStrategy: PID 16722 died... 18:24:10.224173 run iperf3-srv_10.42.42.10(pid=16722): Terminated {rc=256} 18:24:10.236087 --- ParallelTerminationStrategy: PID 16723 died... 18:24:10.296728 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16723): Terminated: ok {rc=0} 18:24:10.308723 --- ParallelTerminationStrategy: PID 16724 died... 18:24:10.370811 run iperf3-srv_10.42.42.10(pid=16724): Terminated {rc=256} 18:24:10.383250 --- ParallelTerminationStrategy: PID 16725 died... 18:24:10.443328 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16725): Terminated: ok {rc=0} 18:24:10.455279 --- ParallelTerminationStrategy: PID 16726 died... 18:24:10.515392 run iperf3-srv_10.42.42.10(pid=16726): Terminated {rc=256} 18:24:10.527595 --- ParallelTerminationStrategy: PID 16727 died... 18:24:10.589717 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16727): Terminated: ok {rc=0} 18:24:10.604007 --- ParallelTerminationStrategy: PID 16728 died... 18:24:10.664717 run iperf3-srv_10.42.42.10(pid=16728): Terminated {rc=256} 18:24:10.677334 --- ParallelTerminationStrategy: PID 16731 died... 18:24:10.737655 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16731): Terminated: ok {rc=0} 18:24:10.749916 --- ParallelTerminationStrategy: PID 16734 died... 18:24:10.814152 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16734): Terminated: ok {rc=0} 18:24:10.826362 --- ParallelTerminationStrategy: PID 16737 died... 18:24:10.887729 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16737): Terminated: ok {rc=0} 18:24:10.978128 bus /gobi_4: Setting Powered False 18:24:12.086733 bus /gobi_4: Setting Powered False 18:24:13.200446 bus /gobi_1: Setting Powered False 18:24:14.305381 bus /gobi_1: Setting Powered False 18:24:15.418480 bus /gobi_0: Setting Powered False 18:24:16.528489 bus /gobi_0: Setting Powered False 18:24:17.643061 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3m4.py", line 8, in <module> setup_run_iperf3_test_parallel(4) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=16735): Process ended prematurely: osmo-stp_10.42.42.5(pid=16735) [trial-2392↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16735)]