Failed
gprs:trx-b200+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=11220): Process ended prematurely: osmo-stp_10.42.42.5(pid=11220) [trial-2392↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11220)]
Standard Output
---------------------------------------------- trial-2392 gprs:trx-b200+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 17:35:45.954841 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 17:35:45.966687 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 17:35:46.132440 tst cs_paging_gprs_active.py: using LAC 35170 17:35:46.285100 tst cs_paging_gprs_active.py: using RAC 235 17:35:46.426118 tst cs_paging_gprs_active.py: using CellId 35170 17:35:46.567492 tst cs_paging_gprs_active.py: using BVCI 35171 17:35:46.595175 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 17:35:46.607903 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 17:35:46.620623 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 17:35:46.633286 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 17:35:46.646902 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 17:35:46.659662 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 17:35:46.673962 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 17:35:46.688080 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 17:35:46.704018 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 17:35:46.851353 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 17:35:47.150549 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 17:35:47.283657 run iperf3-srv_10.42.42.10: Starting iperf3-srv 17:35:47.611284 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11208): Launched 17:35:47.882666 run iperf3-srv_10.42.42.10(pid=11211): Launched 17:35:48.073290 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 17:35:48.202996 run iperf3-srv_10.42.42.10: Starting iperf3-srv 17:35:48.527426 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11212): Launched 17:35:48.806022 run iperf3-srv_10.42.42.10(pid=11213): Launched 17:35:49.011610 tst cs_paging_gprs_active.py:38: start network... 17:35:49.151968 run osmo-hlr_10.42.42.2: Starting osmo-hlr 17:35:49.678301 run create_hlr_db(pid=11214): Launched 17:35:49.871793 bus /gobi_6: Setting Powered False 17:35:50.893584 run create_hlr_db(pid=11214): Terminated: ok {rc=0} 17:35:51.318289 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11216): Launched 17:35:51.631938 run osmo-hlr_10.42.42.2(pid=11217): Launched 17:35:51.749906 run osmo-stp_10.42.42.5: Starting osmo-stp 17:35:52.296196 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11219): Launched 17:35:52.607319 run osmo-stp_10.42.42.5(pid=11220): Launched 17:35:52.719461 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 17:35:53.264005 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11222): Launched 17:35:53.374964 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 17:35:53.648361 run patchelf(pid=11223): Launched 17:35:53.831515 run osmo-stp_10.42.42.5(pid=11220): ERR: Terminated: ERROR {rc=1} [trial-2392↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11220)] 17:35:53.965398 run osmo-stp_10.42.42.5(pid=11220): stdout: | (launched: 2022-12-13_17:35:52.454534) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 17:35:54.099257 run osmo-stp_10.42.42.5(pid=11220): stderr: | �[0;m�[38;5;43m20221213173552621 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213173552621 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213173552621 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213173552622 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213173552622 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213173552622 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213173552622 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 17:35:54.228153 run osmo-stp_10.42.42.5(pid=11220): stdout: | (launched: 2022-12-13_17:35:52.454534) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 17:35:54.355914 run osmo-stp_10.42.42.5(pid=11220): stderr: | �[0;m�[38;5;43m20221213173552621 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213173552621 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213173552621 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213173552622 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213173552622 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213173552622 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213173552622 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 17:35:54.506020 run patchelf(pid=11223): Terminating (SIGINT) 17:35:54.683633 run patchelf(pid=11223): Terminated: ok {rc=0} 17:35:54.715952 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=11220): Process ended prematurely: osmo-stp_10.42.42.5(pid=11220) [trial-2392↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11220)] [trial-2392↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 17:35:54.725287 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 17:35:54.786087 run osmo-hlr_10.42.42.2(pid=11217): ERR: Terminated: ERROR {rc=237} [trial-2392↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=11217)] 17:35:54.835514 run osmo-hlr_10.42.42.2(pid=11217): stdout: | (launched: 2022-12-13_17:35:51.477273) 17:35:54.885684 run osmo-hlr_10.42.42.2(pid=11217): stderr: | �[0;m�[1;31m20221213173551652 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213173551652 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213173551652 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213173551652 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213173551652 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213173551652 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213173551664 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2392/run.2022-12-13_17-10-08/gprs:trx-b200+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213173551672 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213173551673 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213173551673 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 17:35:54.928286 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11208): Terminating (SIGTERM) 17:35:54.968266 run iperf3-srv_10.42.42.10(pid=11211): Terminating (SIGTERM) 17:35:55.008236 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11212): Terminating (SIGTERM) 17:35:55.048205 run iperf3-srv_10.42.42.10(pid=11213): Terminating (SIGTERM) 17:35:55.088195 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11216): Terminating (SIGTERM) 17:35:55.128126 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11219): Terminating (SIGTERM) 17:35:55.168029 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11222): Terminating (SIGTERM) 17:35:55.177241 --- ParallelTerminationStrategy: PID 11208 died... 17:35:55.230827 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11208): Terminated: ok {rc=0} 17:35:55.240395 --- ParallelTerminationStrategy: PID 11211 died... 17:35:55.293763 run iperf3-srv_10.42.42.10(pid=11211): Terminated {rc=256} 17:35:55.303301 --- ParallelTerminationStrategy: PID 11212 died... 17:35:55.356597 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11212): Terminated: ok {rc=0} 17:35:55.366164 --- ParallelTerminationStrategy: PID 11213 died... 17:35:55.419307 run iperf3-srv_10.42.42.10(pid=11213): Terminated {rc=256} 17:35:55.428772 --- ParallelTerminationStrategy: PID 11216 died... 17:35:55.482147 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11216): Terminated: ok {rc=0} 17:35:55.491690 --- ParallelTerminationStrategy: PID 11219 died... 17:35:55.544937 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11219): Terminated: ok {rc=0} 17:35:55.554494 --- ParallelTerminationStrategy: PID 11222 died... 17:35:55.607606 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11222): Terminated: ok {rc=0} 17:35:55.697768 bus /gobi_0: Setting Powered False 17:35:56.804061 bus /gobi_0: Setting Powered False 17:35:57.918200 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=11220): Process ended prematurely: osmo-stp_10.42.42.5(pid=11220) [trial-2392↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11220)]