Failed
dynts:oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any.switch_tch_pdch.py (from dynts_oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any)
Stacktrace
osmo-stp_10.42.42.5(pid=19803): Process ended prematurely: osmo-stp_10.42.42.5(pid=19803) [trial-2393↪dynts:oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19803)]
Standard Output
---------------------------------------------- trial-2393 dynts:oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any switch_tch_pdch.py ---------------------------------------------- 18:56:22.368249 tst dynts:oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 18:56:22.379444 tst dynts:oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x bts (candidates: 1) 18:56:22.519819 tst switch_tch_pdch.py: using LAC 35590 18:56:22.636831 tst switch_tch_pdch.py: using RAC 145 18:56:22.754821 tst switch_tch_pdch.py: using CellId 35590 18:56:22.871014 tst switch_tch_pdch.py: using BVCI 35591 18:56:22.893878 tst dynts:oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 18:56:22.905125 tst dynts:oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 18:56:22.915992 tst dynts:oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 18:56:22.927010 tst dynts:oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 18:56:22.937931 tst dynts:oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 18:56:22.948871 tst dynts:oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 18:56:22.959956 tst dynts:oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 18:56:22.970887 tst dynts:oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x modem (candidates: 2) 18:56:23.091677 tst dynts:oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x modem (candidates: 2) 18:56:23.385448 tst switch_tch_pdch.py:51: start network... 18:56:23.519049 run osmo-hlr_10.42.42.2: Starting osmo-hlr 18:56:24.027035 run create_hlr_db(pid=19797): Launched 18:56:24.214059 bus /gobi_6: Setting Powered False 18:56:25.234463 run create_hlr_db(pid=19797): Terminated: ok {rc=0} 18:56:25.637628 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19799): Launched 18:56:25.936493 run osmo-hlr_10.42.42.2(pid=19800): Launched 18:56:26.045920 run osmo-stp_10.42.42.5: Starting osmo-stp 18:56:26.565562 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19802): Launched 18:56:26.865502 run osmo-stp_10.42.42.5(pid=19803): Launched 18:56:26.974041 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 18:56:27.497739 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19805): Launched 18:56:27.604636 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 18:56:27.865390 run patchelf(pid=19806): Launched 18:56:28.040027 run osmo-stp_10.42.42.5(pid=19803): ERR: Terminated: ERROR {rc=1} [trial-2393↪dynts:oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19803)] 18:56:28.167544 run osmo-stp_10.42.42.5(pid=19803): stdout: | (launched: 2022-12-13_18:56:26.717643) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:56:28.295218 run osmo-stp_10.42.42.5(pid=19803): stderr: | �[0;m�[38;5;43m20221213185626885 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213185626886 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213185626886 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213185626886 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213185626887 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213185626887 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213185626887 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:56:28.418516 run osmo-stp_10.42.42.5(pid=19803): stdout: | (launched: 2022-12-13_18:56:26.717643) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:56:28.541529 run osmo-stp_10.42.42.5(pid=19803): stderr: | �[0;m�[38;5;43m20221213185626885 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213185626886 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213185626886 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213185626886 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213185626887 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213185626887 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213185626887 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:56:28.683880 run patchelf(pid=19806): Terminating (SIGINT) 18:56:28.852212 run patchelf(pid=19806): Terminated: ok {rc=0} 18:56:28.882630 tst switch_tch_pdch.py:54: ERR: Error: osmo-stp_10.42.42.5(pid=19803): Process ended prematurely: osmo-stp_10.42.42.5(pid=19803) [trial-2393↪dynts:oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19803)] [trial-2393↪dynts:oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54] 18:56:28.891199 tst switch_tch_pdch.py:54: Test FAILED (6.5 sec) 18:56:28.951193 run osmo-hlr_10.42.42.2(pid=19800): ERR: Terminated: ERROR {rc=237} [trial-2393↪dynts:oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py↪switch_tch_pdch.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=19800)] 18:56:29.000447 run osmo-hlr_10.42.42.2(pid=19800): stdout: | (launched: 2022-12-13_18:56:25.789666) 18:56:29.049988 run osmo-hlr_10.42.42.2(pid=19800): stderr: | �[0;m�[1;31m20221213185625964 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213185625964 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213185625964 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213185625964 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213185625964 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213185625964 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213185625979 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2393/run.2022-12-13_18-38-33/dynts:oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any/switch_tch_pdch.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213185625990 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213185625990 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213185625990 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 18:56:29.092017 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19799): Terminating (SIGTERM) 18:56:29.132090 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19802): Terminating (SIGTERM) 18:56:29.171623 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19805): Terminating (SIGTERM) 18:56:29.180639 --- ParallelTerminationStrategy: PID 19799 died... 18:56:29.233768 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19799): Terminated: ok {rc=0} 18:56:29.243236 --- ParallelTerminationStrategy: PID 19802 died... 18:56:29.295681 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19802): Terminated: ok {rc=0} 18:56:29.305146 --- ParallelTerminationStrategy: PID 19805 died... 18:56:29.357461 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19805): Terminated: ok {rc=0} 18:56:29.445768 bus /gobi_0: Setting Powered False 18:56:30.547912 bus /gobi_0: Setting Powered False 18:56:31.670893 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/dynts/switch_tch_pdch.py", line 54, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=19803): Process ended prematurely: osmo-stp_10.42.42.5(pid=19803) [trial-2393↪dynts:oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19803)]