Failed
dynts:trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any.switch_tch_pdch.py (from dynts_trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any)
Stacktrace
osmo-stp_10.42.42.5(pid=23312): Process ended prematurely: osmo-stp_10.42.42.5(pid=23312) [trial-2393↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23312)]
Standard Output
---------------------------------------------- trial-2393 dynts:trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any switch_tch_pdch.py ---------------------------------------------- 19:38:55.709740 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 19:38:55.721076 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x bts (candidates: 1) 19:38:55.872024 tst switch_tch_pdch.py: using LAC 35816 19:38:55.991480 tst switch_tch_pdch.py: using RAC 116 19:38:56.105370 tst switch_tch_pdch.py: using CellId 35816 19:38:56.218193 tst switch_tch_pdch.py: using BVCI 35817 19:38:56.240402 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 19:38:56.251812 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 19:38:56.263050 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 19:38:56.274253 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 19:38:56.285511 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 19:38:56.296727 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 19:38:56.308108 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 19:38:56.319290 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x modem (candidates: 2) 19:38:56.438043 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x modem (candidates: 2) 19:38:56.725639 tst switch_tch_pdch.py:51: start network... 19:38:56.857697 run osmo-hlr_10.42.42.2: Starting osmo-hlr 19:38:57.353755 run create_hlr_db(pid=23306): Launched 19:38:57.536722 bus /gobi_6: Setting Powered False 19:38:58.558242 run create_hlr_db(pid=23306): Terminated: ok {rc=0} 19:38:58.978194 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23308): Launched 19:38:59.293061 run osmo-hlr_10.42.42.2(pid=23309): Launched 19:38:59.407300 run osmo-stp_10.42.42.5: Starting osmo-stp 19:38:59.954392 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23311): Launched 19:39:00.270586 run osmo-stp_10.42.42.5(pid=23312): Launched 19:39:00.385265 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 19:39:00.969483 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23314): Launched 19:39:01.103266 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 19:39:01.414847 run patchelf(pid=23343): Launched 19:39:01.619380 run osmo-stp_10.42.42.5(pid=23312): ERR: Terminated: ERROR {rc=1} [trial-2393↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23312)] 19:39:01.753655 run osmo-stp_10.42.42.5(pid=23312): stdout: | (launched: 2022-12-13_19:39:00.115115) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:39:01.890604 run osmo-stp_10.42.42.5(pid=23312): stderr: | �[0;m�[38;5;43m20221213193900302 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213193900302 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213193900302 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213193900303 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213193900303 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213193900303 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213193900303 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:39:02.030157 run osmo-stp_10.42.42.5(pid=23312): stdout: | (launched: 2022-12-13_19:39:00.115115) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:39:02.174503 run osmo-stp_10.42.42.5(pid=23312): stderr: | �[0;m�[38;5;43m20221213193900302 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213193900302 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213193900302 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213193900303 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213193900303 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213193900303 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213193900303 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:39:02.320336 run patchelf(pid=23343): Terminating (SIGINT) 19:39:02.511664 run patchelf(pid=23343): Terminated: ok {rc=0} 19:39:02.544356 tst switch_tch_pdch.py:54: ERR: Error: osmo-stp_10.42.42.5(pid=23312): Process ended prematurely: osmo-stp_10.42.42.5(pid=23312) [trial-2393↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23312)] [trial-2393↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54] 19:39:02.553714 tst switch_tch_pdch.py:54: Test FAILED (6.8 sec) 19:39:02.625383 run osmo-hlr_10.42.42.2(pid=23309): ERR: Terminated: ERROR {rc=237} [trial-2393↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py↪switch_tch_pdch.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=23309)] 19:39:02.681613 run osmo-hlr_10.42.42.2(pid=23309): stdout: | (launched: 2022-12-13_19:38:59.138632) 19:39:02.738581 run osmo-hlr_10.42.42.2(pid=23309): stderr: | �[0;m�[1;31m20221213193859331 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213193859331 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213193859331 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213193859331 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213193859331 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213193859332 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213193859344 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2393/run.2022-12-13_18-38-33/dynts:trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any/switch_tch_pdch.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213193859353 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213193859353 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213193859353 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 19:39:02.782930 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23308): Terminating (SIGTERM) 19:39:02.832525 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23311): Terminating (SIGTERM) 19:39:02.874795 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23314): Terminating (SIGTERM) 19:39:02.884739 --- ParallelTerminationStrategy: PID 23308 died... 19:39:02.952828 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23308): Terminated: ok {rc=0} 19:39:02.963731 --- ParallelTerminationStrategy: PID 23311 died... 19:39:03.018455 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23311): Terminated: ok {rc=0} 19:39:03.029655 --- ParallelTerminationStrategy: PID 23314 died... 19:39:03.095996 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23314): Terminated: ok {rc=0} 19:39:03.193297 bus /gobi_0: Setting Powered False 19:39:04.305477 bus /gobi_0: Setting Powered False 19:39:05.420388 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/dynts/switch_tch_pdch.py", line 54, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=23312): Process ended prematurely: osmo-stp_10.42.42.5(pid=23312) [trial-2393↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23312)]