Failed
gprs:nanobts+band-900.ping_idle_ping.py (from gprs_nanobts+band-900)
Stacktrace
osmo-stp_10.42.42.5(pid=24297): Process ended prematurely: osmo-stp_10.42.42.5(pid=24297) [trial-2393↪gprs:nanobts+band-900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24297)]
Standard Output
---------------------------------------------- trial-2393 gprs:nanobts+band-900 ping_idle_ping.py ---------------------------------------------- 19:49:04.308392 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 19:49:04.320182 tst gprs:nanobts+band-900: Using 1 x bts (candidates: 1) 19:49:04.463922 tst ping_idle_ping.py: using LAC 35871 19:49:04.588685 tst ping_idle_ping.py: using RAC 171 19:49:04.713345 tst ping_idle_ping.py: using CellId 35871 19:49:04.840858 tst ping_idle_ping.py: using BVCI 35872 19:49:04.865323 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 19:49:04.876604 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 19:49:04.887690 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 19:49:04.898826 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 19:49:04.910803 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 19:49:04.922703 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 19:49:04.934799 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 19:49:04.946736 tst gprs:nanobts+band-900: Using 1 x modem (candidates: 4) 19:49:05.227547 tst ping_idle_ping.py:24: start network... 19:49:05.351500 run osmo-hlr_10.42.42.2: Starting osmo-hlr 19:49:05.834208 run create_hlr_db(pid=24291): Launched 19:49:06.020857 bus /gobi_6: Setting Powered False 19:49:07.040748 run create_hlr_db(pid=24291): Terminated: ok {rc=0} 19:49:07.447749 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24293): Launched 19:49:07.771149 run osmo-hlr_10.42.42.2(pid=24294): Launched 19:49:07.884449 run osmo-stp_10.42.42.5: Starting osmo-stp 19:49:08.401153 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24296): Launched 19:49:08.699891 run osmo-stp_10.42.42.5(pid=24297): Launched 19:49:08.807513 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 19:49:09.324084 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24299): Launched 19:49:09.429028 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 19:49:09.686240 run patchelf(pid=24300): Launched 19:49:09.859244 run osmo-stp_10.42.42.5(pid=24297): ERR: Terminated: ERROR {rc=1} [trial-2393↪gprs:nanobts+band-900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24297)] 19:49:09.985721 run osmo-stp_10.42.42.5(pid=24297): stdout: | (launched: 2022-12-13_19:49:08.551937) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:49:10.112392 run osmo-stp_10.42.42.5(pid=24297): stderr: | �[0;m�[38;5;43m20221213194908719 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213194908719 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213194908719 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213194908720 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213194908720 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213194908720 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213194908720 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:49:10.235685 run osmo-stp_10.42.42.5(pid=24297): stdout: | (launched: 2022-12-13_19:49:08.551937) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:49:10.356616 run osmo-stp_10.42.42.5(pid=24297): stderr: | �[0;m�[38;5;43m20221213194908719 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213194908719 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213194908719 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213194908720 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213194908720 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213194908720 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213194908720 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:49:10.498693 run patchelf(pid=24300): Terminating (SIGINT) 19:49:10.665627 run patchelf(pid=24300): Terminated: ok {rc=0} 19:49:10.695750 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=24297): Process ended prematurely: osmo-stp_10.42.42.5(pid=24297) [trial-2393↪gprs:nanobts+band-900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24297)] [trial-2393↪gprs:nanobts+band-900↪ping_idle_ping.py:27] 19:49:10.704283 tst ping_idle_ping.py:27: Test FAILED (6.4 sec) 19:49:10.763794 run osmo-hlr_10.42.42.2(pid=24294): ERR: Terminated: ERROR {rc=237} [trial-2393↪gprs:nanobts+band-900↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=24294)] 19:49:10.812228 run osmo-hlr_10.42.42.2(pid=24294): stdout: | (launched: 2022-12-13_19:49:07.611260) 19:49:10.861380 run osmo-hlr_10.42.42.2(pid=24294): stderr: | �[0;m�[1;31m20221213194907807 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213194907807 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213194907807 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213194907807 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213194907807 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213194907807 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213194907820 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2393/run.2022-12-13_18-38-33/gprs:nanobts+band-900/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213194907828 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213194907828 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213194907828 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 19:49:10.903194 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24293): Terminating (SIGTERM) 19:49:10.943126 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24296): Terminating (SIGTERM) 19:49:10.983674 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24299): Terminating (SIGTERM) 19:49:10.992881 --- ParallelTerminationStrategy: PID 24293 died... 19:49:11.045855 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24293): Terminated: ok {rc=0} 19:49:11.055413 --- ParallelTerminationStrategy: PID 24296 died... 19:49:11.107819 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24296): Terminated: ok {rc=0} 19:49:11.117811 --- ParallelTerminationStrategy: PID 24299 died... 19:49:11.170276 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24299): Terminated: ok {rc=0} 19:49:11.252116 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=24297): Process ended prematurely: osmo-stp_10.42.42.5(pid=24297) [trial-2393↪gprs:nanobts+band-900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24297)]