Failed
gprs:sysmo+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=18834): Process ended prematurely: osmo-stp_10.42.42.5(pid=18834) [trial-2393↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18834)]
Standard Output
---------------------------------------------- trial-2393 gprs:sysmo+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 18:46:24.759843 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:46:24.770807 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 18:46:24.917200 tst cs_paging_gprs_active.py: using LAC 35538 18:46:25.038541 tst cs_paging_gprs_active.py: using RAC 93 18:46:25.160127 tst cs_paging_gprs_active.py: using CellId 35538 18:46:25.281858 tst cs_paging_gprs_active.py: using BVCI 35539 18:46:25.305328 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:46:25.316187 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:46:25.327003 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:46:25.337689 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:46:25.348856 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:46:25.360154 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:46:25.371539 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:46:25.382652 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:46:25.394042 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 18:46:25.508900 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 18:46:25.788060 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 18:46:25.915194 run iperf3-srv_10.42.42.10: Starting iperf3-srv 18:46:26.229993 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18824): Launched 18:46:26.493107 run iperf3-srv_10.42.42.10(pid=18825): Launched 18:46:26.679146 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 18:46:26.806022 run iperf3-srv_10.42.42.10: Starting iperf3-srv 18:46:27.123873 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18826): Launched 18:46:27.386358 run iperf3-srv_10.42.42.10(pid=18827): Launched 18:46:27.572580 tst cs_paging_gprs_active.py:38: start network... 18:46:27.699707 run osmo-hlr_10.42.42.2: Starting osmo-hlr 18:46:28.188874 run create_hlr_db(pid=18828): Launched 18:46:28.364668 bus /gobi_6: Setting Powered False 18:46:29.387157 run create_hlr_db(pid=18828): Terminated: ok {rc=0} 18:46:29.794338 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18830): Launched 18:46:30.102763 run osmo-hlr_10.42.42.2(pid=18831): Launched 18:46:30.214724 run osmo-stp_10.42.42.5: Starting osmo-stp 18:46:30.745721 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18833): Launched 18:46:31.311457 run osmo-stp_10.42.42.5(pid=18834): Launched 18:46:31.540274 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 18:46:32.095020 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18836): Launched 18:46:32.206167 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 18:46:32.486310 run patchelf(pid=18837): Launched 18:46:32.679032 run osmo-stp_10.42.42.5(pid=18834): ERR: Terminated: ERROR {rc=1} [trial-2393↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18834)] 18:46:32.819901 run osmo-stp_10.42.42.5(pid=18834): stdout: | (launched: 2022-12-13_18:46:30.910148) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:46:32.960941 run osmo-stp_10.42.42.5(pid=18834): stderr: | �[0;m�[38;5;43m20221213184631175 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213184631175 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213184631177 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213184631178 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213184631179 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213184631179 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213184631179 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:46:33.097327 run osmo-stp_10.42.42.5(pid=18834): stdout: | (launched: 2022-12-13_18:46:30.910148) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:46:33.232755 run osmo-stp_10.42.42.5(pid=18834): stderr: | �[0;m�[38;5;43m20221213184631175 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213184631175 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213184631177 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213184631178 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213184631179 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213184631179 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213184631179 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:46:33.390729 run patchelf(pid=18837): Terminating (SIGINT) 18:46:33.575049 run patchelf(pid=18837): Terminated: ok {rc=0} 18:46:33.608645 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=18834): Process ended prematurely: osmo-stp_10.42.42.5(pid=18834) [trial-2393↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18834)] [trial-2393↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 18:46:33.618782 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 18:46:33.684314 run osmo-hlr_10.42.42.2(pid=18831): ERR: Terminated: ERROR {rc=237} [trial-2393↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=18831)] 18:46:33.737006 run osmo-hlr_10.42.42.2(pid=18831): stdout: | (launched: 2022-12-13_18:46:29.950389) 18:46:33.790337 run osmo-hlr_10.42.42.2(pid=18831): stderr: | �[0;m�[1;31m20221213184630127 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213184630127 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213184630127 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213184630127 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213184630127 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213184630127 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213184630139 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2393/run.2022-12-13_18-38-33/gprs:sysmo+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213184630149 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213184630149 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213184630149 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 18:46:33.836049 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18824): Terminating (SIGTERM) 18:46:33.879042 run iperf3-srv_10.42.42.10(pid=18825): Terminating (SIGTERM) 18:46:33.922091 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18826): Terminating (SIGTERM) 18:46:33.965168 run iperf3-srv_10.42.42.10(pid=18827): Terminating (SIGTERM) 18:46:34.008251 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18830): Terminating (SIGTERM) 18:46:34.051370 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18833): Terminating (SIGTERM) 18:46:34.093968 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18836): Terminating (SIGTERM) 18:46:34.103649 --- ParallelTerminationStrategy: PID 18824 died... 18:46:34.160699 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18824): Terminated: ok {rc=0} 18:46:34.170932 --- ParallelTerminationStrategy: PID 18825 died... 18:46:34.227658 run iperf3-srv_10.42.42.10(pid=18825): Terminated {rc=256} 18:46:34.237807 --- ParallelTerminationStrategy: PID 18826 died... 18:46:34.294787 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18826): Terminated: ok {rc=0} 18:46:34.304928 --- ParallelTerminationStrategy: PID 18827 died... 18:46:34.361606 run iperf3-srv_10.42.42.10(pid=18827): Terminated {rc=256} 18:46:34.371692 --- ParallelTerminationStrategy: PID 18830 died... 18:46:34.428572 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18830): Terminated: ok {rc=0} 18:46:34.438616 --- ParallelTerminationStrategy: PID 18833 died... 18:46:34.495032 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18833): Terminated: ok {rc=0} 18:46:34.505173 --- ParallelTerminationStrategy: PID 18836 died... 18:46:34.561621 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18836): Terminated: ok {rc=0} 18:46:34.649772 bus /gobi_0: Setting Powered False 18:46:35.753562 bus /gobi_0: Setting Powered False 18:46:36.863441 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=18834): Process ended prematurely: osmo-stp_10.42.42.5(pid=18834) [trial-2393↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18834)]