Failed
gprs:nanobts+band-1900.ping_idle_ping.py (from gprs_nanobts+band-1900)
Stacktrace
osmo-stp_10.42.42.5(pid=23865): Process ended prematurely: osmo-stp_10.42.42.5(pid=23865) [trial-2393↪gprs:nanobts+band-1900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23865)]
Standard Output
---------------------------------------------- trial-2393 gprs:nanobts+band-1900 ping_idle_ping.py ---------------------------------------------- 19:42:56.223353 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 19:42:56.235493 tst gprs:nanobts+band-1900: Using 1 x bts (candidates: 1) 19:42:56.366516 tst ping_idle_ping.py: using LAC 35838 19:42:56.480419 tst ping_idle_ping.py: using RAC 138 19:42:56.602476 tst ping_idle_ping.py: using CellId 35838 19:42:56.719012 tst ping_idle_ping.py: using BVCI 35839 19:42:56.741697 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 19:42:56.752620 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 19:42:56.763668 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 19:42:56.774533 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 19:42:56.786027 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 19:42:56.797027 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 19:42:56.808108 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 19:42:56.819305 tst gprs:nanobts+band-1900: Using 1 x modem (candidates: 4) 19:42:57.106945 tst ping_idle_ping.py:24: start network... 19:42:57.239624 run osmo-hlr_10.42.42.2: Starting osmo-hlr 19:42:57.744479 run create_hlr_db(pid=23859): Launched 19:42:57.928922 bus /gobi_6: Setting Powered False 19:42:58.950226 run create_hlr_db(pid=23859): Terminated: ok {rc=0} 19:42:59.350773 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23861): Launched 19:42:59.650501 run osmo-hlr_10.42.42.2(pid=23862): Launched 19:42:59.759768 run osmo-stp_10.42.42.5: Starting osmo-stp 19:43:00.272907 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23864): Launched 19:43:00.569504 run osmo-stp_10.42.42.5(pid=23865): Launched 19:43:00.679945 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 19:43:01.273426 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23867): Launched 19:43:01.393205 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 19:43:01.676495 run patchelf(pid=23868): Launched 19:43:01.858666 run osmo-stp_10.42.42.5(pid=23865): ERR: Terminated: ERROR {rc=1} [trial-2393↪gprs:nanobts+band-1900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23865)] 19:43:01.990641 run osmo-stp_10.42.42.5(pid=23865): stdout: | (launched: 2022-12-13_19:43:00.423325) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:43:02.120814 run osmo-stp_10.42.42.5(pid=23865): stderr: | �[0;m�[38;5;43m20221213194300589 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213194300589 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213194300590 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213194300590 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213194300591 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213194300591 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213194300591 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:43:02.247148 run osmo-stp_10.42.42.5(pid=23865): stdout: | (launched: 2022-12-13_19:43:00.423325) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:43:02.369554 run osmo-stp_10.42.42.5(pid=23865): stderr: | �[0;m�[38;5;43m20221213194300589 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213194300589 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213194300590 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213194300590 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213194300591 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213194300591 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213194300591 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:43:02.511335 run patchelf(pid=23868): Terminating (SIGINT) 19:43:02.678562 run patchelf(pid=23868): Terminated: ok {rc=0} 19:43:02.709121 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=23865): Process ended prematurely: osmo-stp_10.42.42.5(pid=23865) [trial-2393↪gprs:nanobts+band-1900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23865)] [trial-2393↪gprs:nanobts+band-1900↪ping_idle_ping.py:27] 19:43:02.718128 tst ping_idle_ping.py:27: Test FAILED (6.5 sec) 19:43:02.778574 run osmo-hlr_10.42.42.2(pid=23862): ERR: Terminated: ERROR {rc=237} [trial-2393↪gprs:nanobts+band-1900↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=23862)] 19:43:02.827829 run osmo-hlr_10.42.42.2(pid=23862): stdout: | (launched: 2022-12-13_19:42:59.501409) 19:43:02.877594 run osmo-hlr_10.42.42.2(pid=23862): stderr: | �[0;m�[1;31m20221213194259673 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213194259673 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213194259673 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213194259673 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213194259673 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213194259673 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213194259686 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2393/run.2022-12-13_18-38-33/gprs:nanobts+band-1900/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213194259694 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213194259694 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213194259694 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 19:43:02.919968 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23861): Terminating (SIGTERM) 19:43:02.960083 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23864): Terminating (SIGTERM) 19:43:03.000418 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23867): Terminating (SIGTERM) 19:43:03.009940 --- ParallelTerminationStrategy: PID 23861 died... 19:43:03.063201 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23861): Terminated: ok {rc=0} 19:43:03.072915 --- ParallelTerminationStrategy: PID 23864 died... 19:43:03.125891 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23864): Terminated: ok {rc=0} 19:43:03.135643 --- ParallelTerminationStrategy: PID 23867 died... 19:43:03.188654 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23867): Terminated: ok {rc=0} 19:43:03.276571 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=23865): Process ended prematurely: osmo-stp_10.42.42.5(pid=23865) [trial-2393↪gprs:nanobts+band-1900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23865)]