Failed
gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend.iperf3.py (from gprs_nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=24470): Process ended prematurely: osmo-stp_10.42.42.5(pid=24470) [trial-2393↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24470)]
Standard Output
---------------------------------------------- trial-2393 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend iperf3.py ---------------------------------------------- 19:51:25.334989 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 19:51:25.347667 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 19:51:25.492732 tst iperf3.py: using LAC 35883 19:51:25.617317 tst iperf3.py: using RAC 183 19:51:25.738349 tst iperf3.py: using CellId 35883 19:51:25.858249 tst iperf3.py: using BVCI 35884 19:51:25.881212 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 19:51:25.892837 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 19:51:25.904217 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 19:51:25.915657 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 19:51:25.926923 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 19:51:25.938139 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 19:51:25.949515 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 19:51:25.960501 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 19:51:25.971864 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 19:51:26.264722 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 19:51:26.398194 run iperf3-srv_10.42.42.10: Starting iperf3-srv 19:51:26.728320 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24462): Launched 19:51:27.002529 run iperf3-srv_10.42.42.10(pid=24463): Launched 19:51:27.198227 tst iperf3.py:8: start network... 19:51:27.332809 run osmo-hlr_10.42.42.2: Starting osmo-hlr 19:51:27.835840 run create_hlr_db(pid=24464): Launched 19:51:28.020858 bus /gobi_6: Setting Powered False 19:51:29.041667 run create_hlr_db(pid=24464): Terminated: ok {rc=0} 19:51:29.467190 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24466): Launched 19:51:29.787113 run osmo-hlr_10.42.42.2(pid=24467): Launched 19:51:29.907592 run osmo-stp_10.42.42.5: Starting osmo-stp 19:51:30.463423 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24469): Launched 19:51:30.783762 run osmo-stp_10.42.42.5(pid=24470): Launched 19:51:30.901084 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 19:51:31.582668 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24472): Launched 19:51:31.694436 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 19:51:31.978560 run patchelf(pid=24473): Launched 19:51:32.165991 run osmo-stp_10.42.42.5(pid=24470): ERR: Terminated: ERROR {rc=1} [trial-2393↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24470)] 19:51:32.306047 run osmo-stp_10.42.42.5(pid=24470): stdout: | (launched: 2022-12-13_19:51:30.626678) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:51:32.443330 run osmo-stp_10.42.42.5(pid=24470): stderr: | �[0;m�[38;5;43m20221213195130812 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213195130812 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213195130813 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213195130814 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213195130814 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213195130814 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213195130814 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:51:32.567736 run osmo-stp_10.42.42.5(pid=24470): stdout: | (launched: 2022-12-13_19:51:30.626678) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:51:32.690892 run osmo-stp_10.42.42.5(pid=24470): stderr: | �[0;m�[38;5;43m20221213195130812 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213195130812 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213195130813 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213195130814 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213195130814 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213195130814 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213195130814 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:51:32.833845 run patchelf(pid=24473): Terminating (SIGINT) 19:51:33.001769 run patchelf(pid=24473): Terminated: ok {rc=0} 19:51:33.032745 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=24470): Process ended prematurely: osmo-stp_10.42.42.5(pid=24470) [trial-2393↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24470)] [trial-2393↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8] 19:51:33.042277 tst iperf3.py:8: Test FAILED (7.7 sec) 19:51:33.102324 run osmo-hlr_10.42.42.2(pid=24467): ERR: Terminated: ERROR {rc=237} [trial-2393↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=24467)] 19:51:33.151541 run osmo-hlr_10.42.42.2(pid=24467): stdout: | (launched: 2022-12-13_19:51:29.629792) 19:51:33.201488 run osmo-hlr_10.42.42.2(pid=24467): stderr: | �[0;m�[1;31m20221213195129824 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213195129824 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213195129824 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213195129824 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213195129824 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213195129824 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213195129836 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2393/run.2022-12-13_18-38-33/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213195129845 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213195129845 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213195129845 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 19:51:33.243590 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24462): Terminating (SIGTERM) 19:51:33.283031 run iperf3-srv_10.42.42.10(pid=24463): Terminating (SIGTERM) 19:51:33.323315 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24466): Terminating (SIGTERM) 19:51:33.362987 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24469): Terminating (SIGTERM) 19:51:33.402436 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24472): Terminating (SIGTERM) 19:51:33.411456 --- ParallelTerminationStrategy: PID 24462 died... 19:51:33.464592 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24462): Terminated: ok {rc=0} 19:51:33.474072 --- ParallelTerminationStrategy: PID 24463 died... 19:51:33.526908 run iperf3-srv_10.42.42.10(pid=24463): Terminated {rc=256} 19:51:33.536294 --- ParallelTerminationStrategy: PID 24466 died... 19:51:33.589493 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24466): Terminated: ok {rc=0} 19:51:33.599006 --- ParallelTerminationStrategy: PID 24469 died... 19:51:33.652447 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24469): Terminated: ok {rc=0} 19:51:33.662009 --- ParallelTerminationStrategy: PID 24472 died... 19:51:33.715055 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24472): Terminated: ok {rc=0} 19:51:33.798740 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=24470): Process ended prematurely: osmo-stp_10.42.42.5(pid=24470) [trial-2393↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24470)]