Failed
gprs:nanobts+band-900.cs_paging_gprs_active.py (from gprs_nanobts+band-900)
Stacktrace
osmo-stp_10.42.42.5(pid=963): Process ended prematurely: osmo-stp_10.42.42.5(pid=963) [trial-2394↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=963)]
Standard Output
---------------------------------------------- trial-2394 gprs:nanobts+band-900 cs_paging_gprs_active.py ---------------------------------------------- 21:16:02.370064 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 21:16:02.381226 tst gprs:nanobts+band-900: Using 1 x bts (candidates: 1) 21:16:02.525864 tst cs_paging_gprs_active.py: using LAC 36328 21:16:02.649297 tst cs_paging_gprs_active.py: using RAC 118 21:16:02.772486 tst cs_paging_gprs_active.py: using CellId 36328 21:16:02.901846 tst cs_paging_gprs_active.py: using BVCI 36329 21:16:02.927113 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 21:16:02.938540 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 21:16:02.949758 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 21:16:02.961275 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 21:16:02.972096 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 21:16:02.983128 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 21:16:02.994308 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 21:16:03.005246 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 21:16:03.016381 tst gprs:nanobts+band-900: Using 1 x modem (candidates: 4) 21:16:03.136786 tst gprs:nanobts+band-900: Using 1 x modem (candidates: 4) 21:16:03.421955 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 21:16:03.550045 run iperf3-srv_10.42.42.10: Starting iperf3-srv 21:16:03.866669 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=951): Launched 21:16:04.132765 run iperf3-srv_10.42.42.10(pid=953): Launched 21:16:04.318183 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 21:16:04.445022 run iperf3-srv_10.42.42.10: Starting iperf3-srv 21:16:04.760299 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=954): Launched 21:16:05.024462 run iperf3-srv_10.42.42.10(pid=955): Launched 21:16:05.210662 tst cs_paging_gprs_active.py:38: start network... 21:16:05.345644 run osmo-hlr_10.42.42.2: Starting osmo-hlr 21:16:05.872917 run create_hlr_db(pid=957): Launched 21:16:06.062436 bus /sierra_2: Setting Powered False 21:16:07.083568 run create_hlr_db(pid=957): Terminated: ok {rc=0} 21:16:07.495014 run pcap-recorder_any(filters='host 10.42.42.2')(pid=959): Launched 21:16:07.803468 run osmo-hlr_10.42.42.2(pid=960): Launched 21:16:07.924135 run osmo-stp_10.42.42.5: Starting osmo-stp 21:16:08.459785 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=962): Launched 21:16:08.766058 run osmo-stp_10.42.42.5(pid=963): Launched 21:16:08.877964 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 21:16:09.409400 run pcap-recorder_any(filters='host 10.42.42.6')(pid=965): Launched 21:16:09.518193 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 21:16:09.786457 run patchelf(pid=966): Launched 21:16:09.965505 run osmo-stp_10.42.42.5(pid=963): ERR: Terminated: ERROR {rc=1} [trial-2394↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=963)] 21:16:10.096319 run osmo-stp_10.42.42.5(pid=963): stdout: | (launched: 2022-12-13_21:16:08.615141) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 21:16:10.227626 run osmo-stp_10.42.42.5(pid=963): stderr: | �[0;m�[38;5;43m20221213211608781 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213211608782 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213211608782 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213211608782 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213211608783 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213211608783 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213211608783 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 21:16:10.355057 run osmo-stp_10.42.42.5(pid=963): stdout: | (launched: 2022-12-13_21:16:08.615141) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 21:16:10.480534 run osmo-stp_10.42.42.5(pid=963): stderr: | �[0;m�[38;5;43m20221213211608781 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213211608782 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213211608782 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213211608782 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213211608783 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213211608783 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213211608783 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 21:16:10.627723 run patchelf(pid=966): Terminating (SIGINT) 21:16:10.800751 run patchelf(pid=966): Terminated: ok {rc=0} 21:16:10.832414 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=963): Process ended prematurely: osmo-stp_10.42.42.5(pid=963) [trial-2394↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=963)] [trial-2394↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38] 21:16:10.841793 tst cs_paging_gprs_active.py:38: Test FAILED (8.5 sec) 21:16:10.902160 run osmo-hlr_10.42.42.2(pid=960): ERR: Terminated: ERROR {rc=237} [trial-2394↪gprs:nanobts+band-900↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=960)] 21:16:10.951815 run osmo-hlr_10.42.42.2(pid=960): stdout: | (launched: 2022-12-13_21:16:07.651674) 21:16:11.002191 run osmo-hlr_10.42.42.2(pid=960): stderr: | �[0;m�[1;31m20221213211607825 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213211607825 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213211607825 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213211607825 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213211607825 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213211607825 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213211607838 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2394/run.2022-12-13_20-06-05/gprs:nanobts+band-900/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213211607846 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213211607846 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213211607846 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 21:16:11.045005 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=951): Terminating (SIGTERM) 21:16:11.085243 run iperf3-srv_10.42.42.10(pid=953): Terminating (SIGTERM) 21:16:11.125551 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=954): Terminating (SIGTERM) 21:16:11.165565 run iperf3-srv_10.42.42.10(pid=955): Terminating (SIGTERM) 21:16:11.205751 run pcap-recorder_any(filters='host 10.42.42.2')(pid=959): Terminating (SIGTERM) 21:16:11.245903 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=962): Terminating (SIGTERM) 21:16:11.286149 run pcap-recorder_any(filters='host 10.42.42.6')(pid=965): Terminating (SIGTERM) 21:16:11.295473 --- ParallelTerminationStrategy: PID 951 died... 21:16:11.349788 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=951): Terminated: ok {rc=0} 21:16:11.359498 --- ParallelTerminationStrategy: PID 953 died... 21:16:11.413148 run iperf3-srv_10.42.42.10(pid=953): Terminated {rc=256} 21:16:11.422724 --- ParallelTerminationStrategy: PID 954 died... 21:16:11.476311 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=954): Terminated: ok {rc=0} 21:16:11.485961 --- ParallelTerminationStrategy: PID 955 died... 21:16:11.539474 run iperf3-srv_10.42.42.10(pid=955): Terminated {rc=256} 21:16:11.549102 --- ParallelTerminationStrategy: PID 959 died... 21:16:11.602658 run pcap-recorder_any(filters='host 10.42.42.2')(pid=959): Terminated: ok {rc=0} 21:16:11.612258 --- ParallelTerminationStrategy: PID 962 died... 21:16:11.665978 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=962): Terminated: ok {rc=0} 21:16:11.675678 --- ParallelTerminationStrategy: PID 965 died... 21:16:11.729339 run pcap-recorder_any(filters='host 10.42.42.6')(pid=965): Terminated: ok {rc=0} 21:16:11.813843 bus /gobi_0: Setting Powered False 21:16:12.915314 bus /gobi_0: Setting Powered False 21:16:14.025897 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=963): Process ended prematurely: osmo-stp_10.42.42.5(pid=963) [trial-2394↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=963)]