Failed
gprs:oc2g+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=5114): Process ended prematurely: osmo-stp_10.42.42.5(pid=5114) [trial-2395↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5114)]
Standard Output
---------------------------------------------- trial-2395 gprs:oc2g+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 22:00:11.476200 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:00:11.486871 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 22:00:11.632761 tst cs_paging_gprs_active.py: using LAC 36502 22:00:11.757901 tst cs_paging_gprs_active.py: using RAC 37 22:00:11.882390 tst cs_paging_gprs_active.py: using CellId 36502 22:00:12.001996 tst cs_paging_gprs_active.py: using BVCI 36503 22:00:12.024833 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:00:12.035692 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:00:12.046396 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:00:12.057124 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:00:12.067936 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:00:12.079032 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:00:12.090006 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:00:12.100733 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:00:12.111469 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 22:00:12.224636 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 22:00:12.518047 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 22:00:12.653933 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:00:12.987427 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5104): Launched 22:00:13.265688 run iperf3-srv_10.42.42.10(pid=5105): Launched 22:00:13.464094 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 22:00:13.599517 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:00:13.932665 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5106): Launched 22:00:14.209909 run iperf3-srv_10.42.42.10(pid=5107): Launched 22:00:14.407154 tst cs_paging_gprs_active.py:38: start network... 22:00:14.541999 run osmo-hlr_10.42.42.2: Starting osmo-hlr 22:00:15.049534 run create_hlr_db(pid=5108): Launched 22:00:15.236570 bus /gobi_6: Setting Powered False 22:00:16.281457 run create_hlr_db(pid=5108): Terminated: ok {rc=0} 22:00:16.775658 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5110): Launched 22:00:17.215918 run osmo-hlr_10.42.42.2(pid=5111): Launched 22:00:17.342700 run osmo-stp_10.42.42.5: Starting osmo-stp 22:00:17.899733 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5113): Launched 22:00:18.222467 run osmo-stp_10.42.42.5(pid=5114): Launched 22:00:18.339928 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 22:00:18.901498 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5116): Launched 22:00:19.016843 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 22:00:19.297886 run patchelf(pid=5117): Launched 22:00:19.486038 run osmo-stp_10.42.42.5(pid=5114): ERR: Terminated: ERROR {rc=1} [trial-2395↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5114)] 22:00:19.623869 run osmo-stp_10.42.42.5(pid=5114): stdout: | (launched: 2022-12-13_22:00:18.062907) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:00:19.762326 run osmo-stp_10.42.42.5(pid=5114): stderr: | �[0;m�[38;5;43m20221213220018253 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213220018254 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213220018254 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213220018254 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213220018256 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213220018257 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213220018257 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:00:19.895788 run osmo-stp_10.42.42.5(pid=5114): stdout: | (launched: 2022-12-13_22:00:18.062907) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:00:20.028067 run osmo-stp_10.42.42.5(pid=5114): stderr: | �[0;m�[38;5;43m20221213220018253 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213220018254 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213220018254 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213220018254 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213220018256 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213220018257 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213220018257 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:00:20.182488 run patchelf(pid=5117): Terminating (SIGINT) 22:00:20.362990 run patchelf(pid=5117): Terminated: ok {rc=0} 22:00:20.395855 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=5114): Process ended prematurely: osmo-stp_10.42.42.5(pid=5114) [trial-2395↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5114)] [trial-2395↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 22:00:20.405655 tst cs_paging_gprs_active.py:38: Test FAILED (9.0 sec) 22:00:20.468615 run osmo-hlr_10.42.42.2(pid=5111): ERR: Terminated: ERROR {rc=237} [trial-2395↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=5111)] 22:00:20.519745 run osmo-hlr_10.42.42.2(pid=5111): stdout: | (launched: 2022-12-13_22:00:16.946110) 22:00:20.571404 run osmo-hlr_10.42.42.2(pid=5111): stderr: | �[0;m�[1;31m20221213220017239 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213220017239 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213220017239 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213220017239 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213220017239 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213220017239 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213220017267 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2395/run.2022-12-13_21-44-31/gprs:oc2g+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213220017276 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213220017276 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213220017276 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 22:00:20.615653 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5104): Terminating (SIGTERM) 22:00:20.657537 run iperf3-srv_10.42.42.10(pid=5105): Terminating (SIGTERM) 22:00:20.699880 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5106): Terminating (SIGTERM) 22:00:20.741428 run iperf3-srv_10.42.42.10(pid=5107): Terminating (SIGTERM) 22:00:20.783054 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5110): Terminating (SIGTERM) 22:00:20.824597 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5113): Terminating (SIGTERM) 22:00:20.866359 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5116): Terminating (SIGTERM) 22:00:20.875828 --- ParallelTerminationStrategy: PID 5104 died... 22:00:20.931914 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5104): Terminated: ok {rc=0} 22:00:20.941818 --- ParallelTerminationStrategy: PID 5105 died... 22:00:20.997373 run iperf3-srv_10.42.42.10(pid=5105): Terminated {rc=256} 22:00:21.007207 --- ParallelTerminationStrategy: PID 5106 died... 22:00:21.063080 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5106): Terminated: ok {rc=0} 22:00:21.073066 --- ParallelTerminationStrategy: PID 5107 died... 22:00:21.129125 run iperf3-srv_10.42.42.10(pid=5107): Terminated {rc=256} 22:00:21.138953 --- ParallelTerminationStrategy: PID 5110 died... 22:00:21.194920 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5110): Terminated: ok {rc=0} 22:00:21.204764 --- ParallelTerminationStrategy: PID 5113 died... 22:00:21.260724 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5113): Terminated: ok {rc=0} 22:00:21.270614 --- ParallelTerminationStrategy: PID 5116 died... 22:00:21.326356 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5116): Terminated: ok {rc=0} 22:00:21.414076 bus /gobi_0: Setting Powered False 22:00:22.518894 bus /gobi_0: Setting Powered False 22:00:23.628216 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=5114): Process ended prematurely: osmo-stp_10.42.42.5(pid=5114) [trial-2395↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5114)]