Failed
gprs:oc2g+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=5182): Process ended prematurely: osmo-stp_10.42.42.5(pid=5182) [trial-2395↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5182)]
Standard Output
---------------------------------------------- trial-2395 gprs:oc2g+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 22:01:11.417781 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:01:11.429014 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 22:01:11.581165 tst cs_paging_gprs_active.py: using LAC 36507 22:01:11.708582 tst cs_paging_gprs_active.py: using RAC 42 22:01:11.833745 tst cs_paging_gprs_active.py: using CellId 36507 22:01:11.958533 tst cs_paging_gprs_active.py: using BVCI 36508 22:01:11.983129 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:01:11.994354 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:01:12.005288 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:01:12.016205 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:01:12.027477 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:01:12.038858 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:01:12.050270 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:01:12.061414 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:01:12.072678 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 22:01:12.191494 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 22:01:12.481717 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 22:01:12.607202 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:01:12.919125 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5172): Launched 22:01:13.178417 run iperf3-srv_10.42.42.10(pid=5173): Launched 22:01:13.361653 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 22:01:13.486771 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:01:13.799415 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5174): Launched 22:01:14.057771 run iperf3-srv_10.42.42.10(pid=5175): Launched 22:01:14.240324 tst cs_paging_gprs_active.py:38: start network... 22:01:14.365569 run osmo-hlr_10.42.42.2: Starting osmo-hlr 22:01:14.847418 run create_hlr_db(pid=5176): Launched 22:01:15.020088 bus /gobi_6: Setting Powered False 22:01:16.069744 run create_hlr_db(pid=5176): Terminated: ok {rc=0} 22:01:16.517972 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5178): Launched 22:01:16.922707 run osmo-hlr_10.42.42.2(pid=5179): Launched 22:01:17.198825 run osmo-stp_10.42.42.5: Starting osmo-stp 22:01:17.776813 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5181): Launched 22:01:18.079200 run osmo-stp_10.42.42.5(pid=5182): Launched 22:01:18.188816 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 22:01:18.714979 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5184): Launched 22:01:18.822671 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 22:01:19.085994 run patchelf(pid=5185): Launched 22:01:19.263752 run osmo-stp_10.42.42.5(pid=5182): ERR: Terminated: ERROR {rc=1} [trial-2395↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5182)] 22:01:19.392710 run osmo-stp_10.42.42.5(pid=5182): stdout: | (launched: 2022-12-13_22:01:17.930594) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:01:19.522440 run osmo-stp_10.42.42.5(pid=5182): stderr: | �[0;m�[38;5;43m20221213220118100 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213220118100 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213220118100 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213220118101 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213220118103 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213220118103 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213220118103 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:01:19.647612 run osmo-stp_10.42.42.5(pid=5182): stdout: | (launched: 2022-12-13_22:01:17.930594) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:01:19.771397 run osmo-stp_10.42.42.5(pid=5182): stderr: | �[0;m�[38;5;43m20221213220118100 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213220118100 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213220118100 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213220118101 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213220118103 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213220118103 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213220118103 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:01:19.915504 run patchelf(pid=5185): Terminating (SIGINT) 22:01:20.084250 run patchelf(pid=5185): Terminated: ok {rc=0} 22:01:20.115403 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=5182): Process ended prematurely: osmo-stp_10.42.42.5(pid=5182) [trial-2395↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5182)] [trial-2395↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 22:01:20.124597 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 22:01:20.184057 run osmo-hlr_10.42.42.2(pid=5179): ERR: Terminated: ERROR {rc=237} [trial-2395↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=5179)] 22:01:20.232621 run osmo-hlr_10.42.42.2(pid=5179): stdout: | (launched: 2022-12-13_22:01:16.676519) 22:01:20.281878 run osmo-hlr_10.42.42.2(pid=5179): stderr: | �[0;m�[1;31m20221213220117109 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213220117109 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213220117109 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213220117109 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213220117109 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213220117109 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213220117132 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2395/run.2022-12-13_21-44-31/gprs:oc2g+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213220117151 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213220117152 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213220117152 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 22:01:20.323952 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5172): Terminating (SIGTERM) 22:01:20.363643 run iperf3-srv_10.42.42.10(pid=5173): Terminating (SIGTERM) 22:01:20.403460 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5174): Terminating (SIGTERM) 22:01:20.443660 run iperf3-srv_10.42.42.10(pid=5175): Terminating (SIGTERM) 22:01:20.483415 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5178): Terminating (SIGTERM) 22:01:20.523005 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5181): Terminating (SIGTERM) 22:01:20.563095 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5184): Terminating (SIGTERM) 22:01:20.572290 --- ParallelTerminationStrategy: PID 5172 died... 22:01:20.625469 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5172): Terminated: ok {rc=0} 22:01:20.635014 --- ParallelTerminationStrategy: PID 5173 died... 22:01:20.687875 run iperf3-srv_10.42.42.10(pid=5173): Terminated {rc=256} 22:01:20.697334 --- ParallelTerminationStrategy: PID 5174 died... 22:01:20.749959 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5174): Terminated: ok {rc=0} 22:01:20.759407 --- ParallelTerminationStrategy: PID 5175 died... 22:01:20.811954 run iperf3-srv_10.42.42.10(pid=5175): Terminated {rc=256} 22:01:20.821571 --- ParallelTerminationStrategy: PID 5178 died... 22:01:20.874124 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5178): Terminated: ok {rc=0} 22:01:20.883519 --- ParallelTerminationStrategy: PID 5181 died... 22:01:20.935881 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5181): Terminated: ok {rc=0} 22:01:20.945433 --- ParallelTerminationStrategy: PID 5184 died... 22:01:20.997626 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5184): Terminated: ok {rc=0} 22:01:21.084880 bus /gobi_0: Setting Powered False 22:01:22.191182 bus /gobi_0: Setting Powered False 22:01:23.298453 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=5182): Process ended prematurely: osmo-stp_10.42.42.5(pid=5182) [trial-2395↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5182)]