Failed
gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=8120): Process ended prematurely: osmo-stp_10.42.42.5(pid=8120) [trial-2395↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8120)]
Standard Output
---------------------------------------------- trial-2395 gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py ---------------------------------------------- 22:27:55.383335 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:27:55.394514 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 22:27:55.533517 tst cs_paging_gprs_active.py: using LAC 36649 22:27:55.650867 tst cs_paging_gprs_active.py: using RAC 184 22:27:55.772618 tst cs_paging_gprs_active.py: using CellId 36649 22:27:55.890113 tst cs_paging_gprs_active.py: using BVCI 36650 22:27:55.912937 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:27:55.924089 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:27:55.935030 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:27:55.946093 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:27:55.957030 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:27:55.967841 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:27:55.978878 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:27:55.989811 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:27:56.001048 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 22:27:56.120071 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 22:27:56.397238 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 22:27:56.522295 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:27:56.832259 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8110): Launched 22:27:57.089561 run iperf3-srv_10.42.42.10(pid=8111): Launched 22:27:57.272180 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 22:27:57.396758 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:27:57.706722 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8112): Launched 22:27:57.965525 run iperf3-srv_10.42.42.10(pid=8113): Launched 22:27:58.147454 tst cs_paging_gprs_active.py:38: start network... 22:27:58.271544 run osmo-hlr_10.42.42.2: Starting osmo-hlr 22:27:58.751654 run create_hlr_db(pid=8114): Launched 22:27:58.924218 bus /gobi_6: Setting Powered False 22:27:59.946801 run create_hlr_db(pid=8114): Terminated: ok {rc=0} 22:28:00.374366 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8116): Launched 22:28:00.696046 run osmo-hlr_10.42.42.2(pid=8117): Launched 22:28:00.813292 run osmo-stp_10.42.42.5: Starting osmo-stp 22:28:01.470994 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8119): Launched 22:28:01.885757 run osmo-stp_10.42.42.5(pid=8120): Launched 22:28:02.126327 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 22:28:02.708864 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8122): Launched 22:28:02.815383 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 22:28:03.076219 run patchelf(pid=8123): Launched 22:28:03.250768 run osmo-stp_10.42.42.5(pid=8120): ERR: Terminated: ERROR {rc=1} [trial-2395↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8120)] 22:28:03.378807 run osmo-stp_10.42.42.5(pid=8120): stdout: | (launched: 2022-12-13_22:28:01.629648) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:28:03.507027 run osmo-stp_10.42.42.5(pid=8120): stderr: | �[0;m�[38;5;43m20221213222801962 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213222801962 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213222801962 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213222801963 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213222801963 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213222801963 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213222801963 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:28:03.630721 run osmo-stp_10.42.42.5(pid=8120): stdout: | (launched: 2022-12-13_22:28:01.629648) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:28:03.753360 run osmo-stp_10.42.42.5(pid=8120): stderr: | �[0;m�[38;5;43m20221213222801962 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213222801962 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213222801962 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213222801963 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213222801963 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213222801963 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213222801963 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:28:03.897184 run patchelf(pid=8123): Terminating (SIGINT) 22:28:04.064903 run patchelf(pid=8123): Terminated: ok {rc=0} 22:28:04.095804 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=8120): Process ended prematurely: osmo-stp_10.42.42.5(pid=8120) [trial-2395↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8120)] [trial-2395↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38] 22:28:04.104853 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 22:28:04.164286 run osmo-hlr_10.42.42.2(pid=8117): ERR: Terminated: ERROR {rc=237} [trial-2395↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=8117)] 22:28:04.212926 run osmo-hlr_10.42.42.2(pid=8117): stdout: | (launched: 2022-12-13_22:28:00.537852) 22:28:04.262283 run osmo-hlr_10.42.42.2(pid=8117): stderr: | �[0;m�[1;31m20221213222800737 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213222800737 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213222800737 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213222800737 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213222800738 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213222800738 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213222800754 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2395/run.2022-12-13_21-44-31/gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213222800764 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213222800764 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213222800764 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 22:28:04.305644 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8110): Terminating (SIGTERM) 22:28:04.345066 run iperf3-srv_10.42.42.10(pid=8111): Terminating (SIGTERM) 22:28:04.385185 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8112): Terminating (SIGTERM) 22:28:04.424615 run iperf3-srv_10.42.42.10(pid=8113): Terminating (SIGTERM) 22:28:04.464047 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8116): Terminating (SIGTERM) 22:28:04.503526 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8119): Terminating (SIGTERM) 22:28:04.542887 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8122): Terminating (SIGTERM) 22:28:04.551969 --- ParallelTerminationStrategy: PID 8110 died... 22:28:04.605729 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8110): Terminated: ok {rc=0} 22:28:04.615393 --- ParallelTerminationStrategy: PID 8111 died... 22:28:04.667995 run iperf3-srv_10.42.42.10(pid=8111): Terminated {rc=256} 22:28:04.677432 --- ParallelTerminationStrategy: PID 8112 died... 22:28:04.730058 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8112): Terminated: ok {rc=0} 22:28:04.739431 --- ParallelTerminationStrategy: PID 8113 died... 22:28:04.792074 run iperf3-srv_10.42.42.10(pid=8113): Terminated {rc=256} 22:28:04.801933 --- ParallelTerminationStrategy: PID 8116 died... 22:28:04.854759 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8116): Terminated: ok {rc=0} 22:28:04.864086 --- ParallelTerminationStrategy: PID 8119 died... 22:28:04.916734 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8119): Terminated: ok {rc=0} 22:28:04.926392 --- ParallelTerminationStrategy: PID 8122 died... 22:28:04.979066 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8122): Terminated: ok {rc=0} 22:28:05.062830 bus /gobi_0: Setting Powered False 22:28:06.170057 bus /gobi_0: Setting Powered False 22:28:07.282564 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=8120): Process ended prematurely: osmo-stp_10.42.42.5(pid=8120) [trial-2395↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8120)]