Failed
gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend.iperf3.py (from gprs_nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=18752): Process ended prematurely: osmo-stp_10.42.42.5(pid=18752) [trial-2396↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18752)]
Standard Output
---------------------------------------------- trial-2396 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend iperf3.py ---------------------------------------------- 00:24:08.854834 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 00:24:08.869402 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 00:24:09.016022 tst iperf3.py: using LAC 37266 00:24:09.143011 tst iperf3.py: using RAC 36 00:24:09.272216 tst iperf3.py: using CellId 37266 00:24:09.399476 tst iperf3.py: using BVCI 37267 00:24:09.425577 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 00:24:09.438512 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 00:24:09.451197 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 00:24:09.464903 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 00:24:09.479342 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 00:24:09.492742 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 00:24:09.506161 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 00:24:09.519765 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 00:24:09.533557 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 00:24:09.816374 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 00:24:09.941898 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:24:10.272672 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18744): Launched 00:24:10.560370 run iperf3-srv_10.42.42.10(pid=18745): Launched 00:24:10.764494 tst iperf3.py:8: start network... 00:24:10.902536 run osmo-hlr_10.42.42.2: Starting osmo-hlr 00:24:11.461225 run create_hlr_db(pid=18746): Launched 00:24:11.651105 bus /gobi_6: Setting Powered False 00:24:12.673716 run create_hlr_db(pid=18746): Terminated: ok {rc=0} 00:24:13.124633 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18748): Launched 00:24:13.550536 run osmo-hlr_10.42.42.2(pid=18749): Launched 00:24:13.802596 run osmo-stp_10.42.42.5: Starting osmo-stp 00:24:14.386514 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18751): Launched 00:24:14.816131 run osmo-stp_10.42.42.5(pid=18752): Launched 00:24:15.041938 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 00:24:15.631751 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18754): Launched 00:24:15.751888 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 00:24:16.103280 run patchelf(pid=18755): Launched 00:24:16.304227 run osmo-stp_10.42.42.5(pid=18752): ERR: Terminated: ERROR {rc=1} [trial-2396↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18752)] 00:24:16.493356 run osmo-stp_10.42.42.5(pid=18752): stdout: | (launched: 2022-12-14_00:24:14.553797) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:24:16.665972 run osmo-stp_10.42.42.5(pid=18752): stderr: | �[0;m�[38;5;43m20221214002414860 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214002414860 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214002414860 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214002414861 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214002414861 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214002414861 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214002414861 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:24:16.830666 run osmo-stp_10.42.42.5(pid=18752): stdout: | (launched: 2022-12-14_00:24:14.553797) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:24:16.995132 run osmo-stp_10.42.42.5(pid=18752): stderr: | �[0;m�[38;5;43m20221214002414860 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214002414860 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214002414860 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214002414861 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214002414861 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214002414861 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214002414861 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:24:17.180689 run patchelf(pid=18755): Terminating (SIGINT) 00:24:17.404741 run patchelf(pid=18755): Terminated: ok {rc=0} 00:24:17.444986 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=18752): Process ended prematurely: osmo-stp_10.42.42.5(pid=18752) [trial-2396↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18752)] [trial-2396↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8] 00:24:17.456613 tst iperf3.py:8: Test FAILED (8.6 sec) 00:24:17.535453 run osmo-hlr_10.42.42.2(pid=18749): ERR: Terminated: ERROR {rc=237} [trial-2396↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=18749)] 00:24:17.598824 run osmo-hlr_10.42.42.2(pid=18749): stdout: | (launched: 2022-12-14_00:24:13.291788) 00:24:17.664925 run osmo-hlr_10.42.42.2(pid=18749): stderr: | �[0;m�[1;31m20221214002413605 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214002413605 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214002413605 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214002413605 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214002413605 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214002413605 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214002413627 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2396/run.2022-12-13_23-11-51/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214002413636 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214002413636 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214002413636 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 00:24:17.720358 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18744): Terminating (SIGTERM) 00:24:17.772119 run iperf3-srv_10.42.42.10(pid=18745): Terminating (SIGTERM) 00:24:17.824795 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18748): Terminating (SIGTERM) 00:24:17.879457 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18751): Terminating (SIGTERM) 00:24:17.935124 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18754): Terminating (SIGTERM) 00:24:17.949365 --- ParallelTerminationStrategy: PID 18744 died... 00:24:18.019112 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18744): Terminated: ok {rc=0} 00:24:18.033686 --- ParallelTerminationStrategy: PID 18745 died... 00:24:18.098910 run iperf3-srv_10.42.42.10(pid=18745): Terminated {rc=256} 00:24:18.111098 --- ParallelTerminationStrategy: PID 18748 died... 00:24:18.179540 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18748): Terminated: ok {rc=0} 00:24:18.193168 --- ParallelTerminationStrategy: PID 18751 died... 00:24:18.262310 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18751): Terminated: ok {rc=0} 00:24:18.276289 --- ParallelTerminationStrategy: PID 18754 died... 00:24:18.344653 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18754): Terminated: ok {rc=0} 00:24:18.440424 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=18752): Process ended prematurely: osmo-stp_10.42.42.5(pid=18752) [trial-2396↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18752)]