Failed
gprs:nanobts+band-900.cs_paging_gprs_active.py (from gprs_nanobts+band-900)
Stacktrace
osmo-stp_10.42.42.5(pid=18265): Process ended prematurely: osmo-stp_10.42.42.5(pid=18265) [trial-2396↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18265)]
Standard Output
---------------------------------------------- trial-2396 gprs:nanobts+band-900 cs_paging_gprs_active.py ---------------------------------------------- 00:20:55.104327 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 00:20:55.115451 tst gprs:nanobts+band-900: Using 1 x bts (candidates: 1) 00:20:55.257386 tst cs_paging_gprs_active.py: using LAC 37250 00:20:55.385254 tst cs_paging_gprs_active.py: using RAC 20 00:20:55.510233 tst cs_paging_gprs_active.py: using CellId 37250 00:20:55.638756 tst cs_paging_gprs_active.py: using BVCI 37251 00:20:55.663783 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 00:20:55.674935 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 00:20:55.685860 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 00:20:55.696797 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 00:20:55.707962 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 00:20:55.719268 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 00:20:55.730721 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 00:20:55.741876 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 00:20:55.752736 tst gprs:nanobts+band-900: Using 1 x modem (candidates: 4) 00:20:55.869992 tst gprs:nanobts+band-900: Using 1 x modem (candidates: 4) 00:20:56.166623 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 00:20:56.301353 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:20:56.634659 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18255): Launched 00:20:56.910258 run iperf3-srv_10.42.42.10(pid=18256): Launched 00:20:57.107350 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 00:20:57.241981 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:20:57.575501 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18257): Launched 00:20:57.850905 run iperf3-srv_10.42.42.10(pid=18258): Launched 00:20:58.047748 tst cs_paging_gprs_active.py:38: start network... 00:20:58.182041 run osmo-hlr_10.42.42.2: Starting osmo-hlr 00:20:58.686418 run create_hlr_db(pid=18259): Launched 00:20:58.872504 bus /sierra_2: Setting Powered False 00:20:59.893489 run create_hlr_db(pid=18259): Terminated: ok {rc=0} 00:21:00.319336 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18261): Launched 00:21:00.641384 run osmo-hlr_10.42.42.2(pid=18262): Launched 00:21:00.756301 run osmo-stp_10.42.42.5: Starting osmo-stp 00:21:01.332828 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18264): Launched 00:21:01.697128 run osmo-stp_10.42.42.5(pid=18265): Launched 00:21:01.871262 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 00:21:02.530519 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18267): Launched 00:21:02.645623 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 00:21:02.924522 run patchelf(pid=18268): Launched 00:21:03.111532 run osmo-stp_10.42.42.5(pid=18265): ERR: Terminated: ERROR {rc=1} [trial-2396↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18265)] 00:21:03.249021 run osmo-stp_10.42.42.5(pid=18265): stdout: | (launched: 2022-12-14_00:21:01.499142) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:21:03.387063 run osmo-stp_10.42.42.5(pid=18265): stderr: | �[0;m�[38;5;43m20221214002101864 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214002101864 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214002101864 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214002101871 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214002101872 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214002101872 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214002101872 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:21:03.519782 run osmo-stp_10.42.42.5(pid=18265): stdout: | (launched: 2022-12-14_00:21:01.499142) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:21:03.651258 run osmo-stp_10.42.42.5(pid=18265): stderr: | �[0;m�[38;5;43m20221214002101864 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214002101864 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214002101864 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214002101871 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214002101872 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214002101872 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214002101872 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:21:03.804619 run patchelf(pid=18268): Terminating (SIGINT) 00:21:03.984512 run patchelf(pid=18268): Terminated: ok {rc=0} 00:21:04.017655 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=18265): Process ended prematurely: osmo-stp_10.42.42.5(pid=18265) [trial-2396↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18265)] [trial-2396↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38] 00:21:04.027297 tst cs_paging_gprs_active.py:38: Test FAILED (9.0 sec) 00:21:04.090249 run osmo-hlr_10.42.42.2(pid=18262): ERR: Terminated: ERROR {rc=237} [trial-2396↪gprs:nanobts+band-900↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=18262)] 00:21:04.141519 run osmo-hlr_10.42.42.2(pid=18262): stdout: | (launched: 2022-12-14_00:21:00.483170) 00:21:04.193446 run osmo-hlr_10.42.42.2(pid=18262): stderr: | �[0;m�[1;31m20221214002100682 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214002100682 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214002100682 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214002100682 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214002100682 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214002100682 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214002100694 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2396/run.2022-12-13_23-11-51/gprs:nanobts+band-900/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214002100702 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214002100703 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214002100703 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 00:21:04.237720 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18255): Terminating (SIGTERM) 00:21:04.279302 run iperf3-srv_10.42.42.10(pid=18256): Terminating (SIGTERM) 00:21:04.321482 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18257): Terminating (SIGTERM) 00:21:04.363568 run iperf3-srv_10.42.42.10(pid=18258): Terminating (SIGTERM) 00:21:04.405660 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18261): Terminating (SIGTERM) 00:21:04.447671 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18264): Terminating (SIGTERM) 00:21:04.489869 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18267): Terminating (SIGTERM) 00:21:04.499452 --- ParallelTerminationStrategy: PID 18255 died... 00:21:04.555198 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18255): Terminated: ok {rc=0} 00:21:04.565317 --- ParallelTerminationStrategy: PID 18256 died... 00:21:04.621000 run iperf3-srv_10.42.42.10(pid=18256): Terminated {rc=256} 00:21:04.630894 --- ParallelTerminationStrategy: PID 18257 died... 00:21:04.686467 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18257): Terminated: ok {rc=0} 00:21:04.696356 --- ParallelTerminationStrategy: PID 18258 died... 00:21:04.751777 run iperf3-srv_10.42.42.10(pid=18258): Terminated {rc=256} 00:21:04.761777 --- ParallelTerminationStrategy: PID 18261 died... 00:21:04.817048 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18261): Terminated: ok {rc=0} 00:21:04.826964 --- ParallelTerminationStrategy: PID 18264 died... 00:21:04.883049 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18264): Terminated: ok {rc=0} 00:21:04.893210 --- ParallelTerminationStrategy: PID 18267 died... 00:21:04.949207 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18267): Terminated: ok {rc=0} 00:21:05.035445 bus /gobi_0: Setting Powered False 00:21:06.141453 bus /gobi_0: Setting Powered False 00:21:07.249789 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=18265): Process ended prematurely: osmo-stp_10.42.42.5(pid=18265) [trial-2396↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18265)]