Failed
gprs:trx-b200+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=13650): Process ended prematurely: osmo-stp_10.42.42.5(pid=13650) [trial-2396↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13650)]
Standard Output
---------------------------------------------- trial-2396 gprs:trx-b200+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 23:35:03.262092 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 23:35:03.273192 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x bts (candidates: 1) 23:35:03.411017 tst cs_paging_gprs_active.py: using LAC 37004 23:35:03.527624 tst cs_paging_gprs_active.py: using RAC 29 23:35:03.643659 tst cs_paging_gprs_active.py: using CellId 37004 23:35:03.762743 tst cs_paging_gprs_active.py: using BVCI 37005 23:35:03.786029 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 23:35:03.796754 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 23:35:03.807245 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 23:35:03.817811 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 23:35:03.828698 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 23:35:03.839660 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 23:35:03.850365 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 23:35:03.860767 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 23:35:03.871344 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4) 23:35:03.991890 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4) 23:35:04.273950 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 23:35:04.399363 run iperf3-srv_10.42.42.10: Starting iperf3-srv 23:35:04.708609 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13640): Launched 23:35:04.965000 run iperf3-srv_10.42.42.10(pid=13641): Launched 23:35:05.147186 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 23:35:05.271936 run iperf3-srv_10.42.42.10: Starting iperf3-srv 23:35:05.580047 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13642): Launched 23:35:05.836481 run iperf3-srv_10.42.42.10(pid=13643): Launched 23:35:06.019024 tst cs_paging_gprs_active.py:38: start network... 23:35:06.143739 run osmo-hlr_10.42.42.2: Starting osmo-hlr 23:35:06.620935 run create_hlr_db(pid=13644): Launched 23:35:06.792056 bus /gobi_6: Setting Powered False 23:35:07.814830 run create_hlr_db(pid=13644): Terminated: ok {rc=0} 23:35:08.236755 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13646): Launched 23:35:08.555306 run osmo-hlr_10.42.42.2(pid=13647): Launched 23:35:08.673022 run osmo-stp_10.42.42.5: Starting osmo-stp 23:35:09.226439 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13649): Launched 23:35:09.545272 run osmo-stp_10.42.42.5(pid=13650): Launched 23:35:09.662464 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 23:35:10.218144 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13652): Launched 23:35:10.332933 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 23:35:10.610569 run patchelf(pid=13653): Launched 23:35:10.797282 run osmo-stp_10.42.42.5(pid=13650): ERR: Terminated: ERROR {rc=1} [trial-2396↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13650)] 23:35:10.934104 run osmo-stp_10.42.42.5(pid=13650): stdout: | (launched: 2022-12-13_23:35:09.389054) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:35:11.071671 run osmo-stp_10.42.42.5(pid=13650): stderr: | �[0;m�[38;5;43m20221213233509579 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213233509579 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213233509580 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213233509580 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213233509581 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213233509581 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213233509581 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:35:11.204521 run osmo-stp_10.42.42.5(pid=13650): stdout: | (launched: 2022-12-13_23:35:09.389054) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:35:11.335903 run osmo-stp_10.42.42.5(pid=13650): stderr: | �[0;m�[38;5;43m20221213233509579 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213233509579 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213233509580 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213233509580 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213233509581 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213233509581 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213233509581 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:35:11.488920 run patchelf(pid=13653): Terminating (SIGINT) 23:35:11.668792 run patchelf(pid=13653): Terminated: ok {rc=0} 23:35:11.701751 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=13650): Process ended prematurely: osmo-stp_10.42.42.5(pid=13650) [trial-2396↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13650)] [trial-2396↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 23:35:11.711506 tst cs_paging_gprs_active.py:38: Test FAILED (8.5 sec) 23:35:11.774108 run osmo-hlr_10.42.42.2(pid=13647): ERR: Terminated: ERROR {rc=237} [trial-2396↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=13647)] 23:35:11.825653 run osmo-hlr_10.42.42.2(pid=13647): stdout: | (launched: 2022-12-13_23:35:08.399219) 23:35:11.877845 run osmo-hlr_10.42.42.2(pid=13647): stderr: | �[0;m�[1;31m20221213233508596 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213233508596 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213233508596 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213233508596 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213233508597 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213233508597 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213233508609 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2396/run.2022-12-13_23-11-51/gprs:trx-b200+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213233508617 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213233508617 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213233508617 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 23:35:11.922881 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13640): Terminating (SIGTERM) 23:35:11.965609 run iperf3-srv_10.42.42.10(pid=13641): Terminating (SIGTERM) 23:35:12.007925 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13642): Terminating (SIGTERM) 23:35:12.049824 run iperf3-srv_10.42.42.10(pid=13643): Terminating (SIGTERM) 23:35:12.091769 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13646): Terminating (SIGTERM) 23:35:12.133905 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13649): Terminating (SIGTERM) 23:35:12.176231 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13652): Terminating (SIGTERM) 23:35:12.185897 --- ParallelTerminationStrategy: PID 13640 died... 23:35:12.242147 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13640): Terminated: ok {rc=0} 23:35:12.252099 --- ParallelTerminationStrategy: PID 13641 died... 23:35:12.308029 run iperf3-srv_10.42.42.10(pid=13641): Terminated {rc=256} 23:35:12.317999 --- ParallelTerminationStrategy: PID 13642 died... 23:35:12.373938 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13642): Terminated: ok {rc=0} 23:35:12.383840 --- ParallelTerminationStrategy: PID 13643 died... 23:35:12.439727 run iperf3-srv_10.42.42.10(pid=13643): Terminated {rc=256} 23:35:12.449736 --- ParallelTerminationStrategy: PID 13646 died... 23:35:12.505622 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13646): Terminated: ok {rc=0} 23:35:12.515609 --- ParallelTerminationStrategy: PID 13649 died... 23:35:12.571528 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13649): Terminated: ok {rc=0} 23:35:12.581899 --- ParallelTerminationStrategy: PID 13652 died... 23:35:12.637630 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13652): Terminated: ok {rc=0} 23:35:12.723424 bus /gobi_0: Setting Powered False 23:35:13.824728 bus /gobi_0: Setting Powered False 23:35:14.934545 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=13650): Process ended prematurely: osmo-stp_10.42.42.5(pid=13650) [trial-2396↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13650)]