Failed
gprs:trx-lms+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-lms+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=16051): Process ended prematurely: osmo-stp_10.42.42.5(pid=16051) [trial-2396↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16051)]
Standard Output
---------------------------------------------- trial-2396 gprs:trx-lms+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 00:00:48.627880 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:00:48.639332 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x bts (candidates: 1) 00:00:48.783630 tst cs_paging_gprs_active.py: using LAC 37142 00:00:48.908161 tst cs_paging_gprs_active.py: using RAC 167 00:00:49.033231 tst cs_paging_gprs_active.py: using CellId 37142 00:00:49.156667 tst cs_paging_gprs_active.py: using BVCI 37143 00:00:49.181280 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:00:49.192788 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:00:49.204065 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:00:49.215446 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:00:49.227113 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:00:49.238897 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:00:49.250754 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:00:49.262412 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:00:49.274342 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x modem (candidates: 4) 00:00:49.394101 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x modem (candidates: 4) 00:00:49.671389 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 00:00:49.795813 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:00:50.107206 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16035): Launched 00:00:50.364024 run iperf3-srv_10.42.42.10(pid=16036): Launched 00:00:50.546971 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 00:00:50.671719 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:00:50.981960 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16037): Launched 00:00:51.238882 run iperf3-srv_10.42.42.10(pid=16038): Launched 00:00:51.421282 tst cs_paging_gprs_active.py:38: start network... 00:00:51.545723 run osmo-hlr_10.42.42.2: Starting osmo-hlr 00:00:52.023527 run create_hlr_db(pid=16043): Launched 00:00:52.195684 bus /gobi_6: Setting Powered False 00:00:53.217611 run create_hlr_db(pid=16043): Terminated: ok {rc=0} 00:00:53.641340 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16047): Launched 00:00:53.959611 run osmo-hlr_10.42.42.2(pid=16048): Launched 00:00:54.079385 run osmo-stp_10.42.42.5: Starting osmo-stp 00:00:54.630805 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16050): Launched 00:00:54.949461 run osmo-stp_10.42.42.5(pid=16051): Launched 00:00:55.065731 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 00:00:55.619678 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16053): Launched 00:00:55.734123 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 00:00:56.005481 run patchelf(pid=16054): Launched 00:00:56.182878 run osmo-stp_10.42.42.5(pid=16051): ERR: Terminated: ERROR {rc=1} [trial-2396↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16051)] 00:00:56.311521 run osmo-stp_10.42.42.5(pid=16051): stdout: | (launched: 2022-12-14_00:00:54.793030) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:00:56.440480 run osmo-stp_10.42.42.5(pid=16051): stderr: | �[0;m�[38;5;43m20221214000054983 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214000054983 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214000054984 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214000054984 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214000054986 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214000054987 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214000054987 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:00:56.564378 run osmo-stp_10.42.42.5(pid=16051): stdout: | (launched: 2022-12-14_00:00:54.793030) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:00:56.687450 run osmo-stp_10.42.42.5(pid=16051): stderr: | �[0;m�[38;5;43m20221214000054983 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214000054983 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214000054984 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214000054984 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214000054986 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214000054987 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214000054987 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:00:56.830455 run patchelf(pid=16054): Terminating (SIGINT) 00:00:56.998683 run patchelf(pid=16054): Terminated: ok {rc=0} 00:00:57.029627 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=16051): Process ended prematurely: osmo-stp_10.42.42.5(pid=16051) [trial-2396↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16051)] [trial-2396↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 00:00:57.038770 tst cs_paging_gprs_active.py:38: Test FAILED (8.4 sec) 00:00:57.098719 run osmo-hlr_10.42.42.2(pid=16048): ERR: Terminated: ERROR {rc=237} [trial-2396↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=16048)] 00:00:57.147818 run osmo-hlr_10.42.42.2(pid=16048): stdout: | (launched: 2022-12-14_00:00:53.803570) 00:00:57.197375 run osmo-hlr_10.42.42.2(pid=16048): stderr: | �[0;m�[1;31m20221214000054001 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214000054001 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214000054001 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214000054002 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214000054002 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214000054002 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214000054014 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2396/run.2022-12-13_23-11-51/gprs:trx-lms+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214000054022 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214000054022 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214000054022 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 00:00:57.239656 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16035): Terminating (SIGTERM) 00:00:57.279076 run iperf3-srv_10.42.42.10(pid=16036): Terminating (SIGTERM) 00:00:57.318466 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16037): Terminating (SIGTERM) 00:00:57.357929 run iperf3-srv_10.42.42.10(pid=16038): Terminating (SIGTERM) 00:00:57.397350 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16047): Terminating (SIGTERM) 00:00:57.437321 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16050): Terminating (SIGTERM) 00:00:57.477335 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16053): Terminating (SIGTERM) 00:00:57.486635 --- ParallelTerminationStrategy: PID 16035 died... 00:00:57.539444 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16035): Terminated: ok {rc=0} 00:00:57.549123 --- ParallelTerminationStrategy: PID 16036 died... 00:00:57.601383 run iperf3-srv_10.42.42.10(pid=16036): Terminated {rc=256} 00:00:57.610948 --- ParallelTerminationStrategy: PID 16037 died... 00:00:57.663755 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16037): Terminated: ok {rc=0} 00:00:57.673462 --- ParallelTerminationStrategy: PID 16038 died... 00:00:57.725975 run iperf3-srv_10.42.42.10(pid=16038): Terminated {rc=256} 00:00:57.735564 --- ParallelTerminationStrategy: PID 16047 died... 00:00:57.788185 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16047): Terminated: ok {rc=0} 00:00:57.797800 --- ParallelTerminationStrategy: PID 16050 died... 00:00:57.850263 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16050): Terminated: ok {rc=0} 00:00:57.859743 --- ParallelTerminationStrategy: PID 16053 died... 00:00:57.912274 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16053): Terminated: ok {rc=0} 00:00:58.000244 bus /gobi_0: Setting Powered False 00:00:59.103913 bus /gobi_0: Setting Powered False 00:01:00.214315 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=16051): Process ended prematurely: osmo-stp_10.42.42.5(pid=16051) [trial-2396↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16051)]